Vive Enora Pulse G-Spot Wand Vibrator

1. Introduction

The Vive Enora Pulse G-Spot Wand Vibrator is a double-ended, rechargeable device designed for personal use. It features a silicone construction and offers multiple vibration patterns. This manual provides instructions for safe and effective use, maintenance, and care of your device.

Image 1.1: Front view of the Vive Enora Pulse G-Spot Wand Vibrator packaging, showing the product design and brand logo.

2. Safety Information

Please read all safety instructions before using the device. Failure to follow these instructions may result in injury or damage to the product.

• This product is for external use only.
• Do not use if the silicone material appears damaged or torn.
• Discontinue use immediately if you experience any discomfort or irritation.
• Keep out of reach of children.
• Ensure the charging port is completely dry before connecting the magnetic USB charging cable.
• Do not use with silicone-based lubricants, as these can degrade the silicone material. Use water-based lubricants only.

3. Setup

3.1 Initial Charging

Before first use, fully charge the device. The device uses a magnetic USB charging cable.

1. Locate the magnetic charging port on the device.
2. Connect the magnetic USB charging cable to the device's charging port.
3. Plug the USB end of the cable into a standard USB power adapter (not included) or a computer USB port.
4. Allow the device to charge completely. The indicator light will show charging status (refer to device for specific light behavior). A full charge typically takes 2-3 hours.

Image 3.1: Back of the product packaging, illustrating charging instructions and control buttons.

4. Operating Instructions

The Vive Enora Pulse G-Spot Wand Vibrator features independent controls for each of its double ends, allowing for versatile use. Each end has its own power button and intensity/mode controls.

4.1 General Operation for Each End

1. Power On/Off: Press and hold the power button on the desired end for approximately 3 seconds to turn it on or off.
2. Change Modes: While the device is on, press the mode button (often indicated by a wave or circular icon) to cycle through the available vibration patterns. The device offers 10 pulse-wave patterns and 10 vibration patterns.
3. Adjust Intensity: Use the '+' and '-' buttons to increase or decrease the vibration intensity for the active end.

Refer to Image 3.1 for a visual guide to the control buttons on the device.

5. Maintenance

5.1 Cleaning

Proper cleaning ensures hygiene and prolongs the life of your device.

• Clean the device thoroughly before and after each use.
• Wash with warm water and a mild, toy-safe soap or a specialized toy cleaner.
• Rinse thoroughly with clean water.
• Pat dry with a lint-free cloth or allow to air dry completely before storage.
• Do not use cleaners containing alcohol, petroleum, or acetone, as these can damage the silicone.

5.2 Storage

• Store the device in a clean, dry, and cool place.
• Keep it away from direct sunlight and extreme temperatures.
• Store separately from other toys made of different materials to prevent material degradation.

6. Troubleshooting

If you encounter issues with your Vive Enora Pulse G-Spot Wand Vibrator, refer to the following common solutions:

7. Specifications

• Model Number: VIVE019BLK
• Material: Silicone
• Color: Black
• Dimensions: 8.66 x 1.65 x 1.65 inches (22 x 4.2 x 4.2 cm)
• Weight: 6.88 ounces
• Battery: 1 Lithium Ion battery (included)
• Charging: Magnetic USB rechargeable
• Waterproof: 100% waterproof
• Manufacturer: Shots America

Image 7.1: Visual representation of the Vive Enora Pulse G-Spot Wand Vibrator's dimensions, showing length and width measurements.

8. Warranty and Support

For warranty information or technical support, please contact the manufacturer or retailer where the product was purchased. Refer to the product packaging or manufacturer's website for specific contact details.

Additional information may be available at stimufacts.com.