1. Introduction
Thank you for choosing the HBN Remote Control Outlet Kit. This kit provides a convenient way to wirelessly control your household appliances and lighting. It includes four remote control outlets and one remote control, designed for ease of use and energy efficiency.
Image 1.1: HBN Remote Control Outlet Kit components.
Key features include:
- Easy setup and pairing.
- Wireless control with a range of up to 30 meters.
- Energy-saving design to reduce standby power consumption.
- Versatile use for various household appliances up to 3680W/16A.
2. Important Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Indoor Use Only: These outlets are designed for indoor use in dry locations. Do not use outdoors or in wet conditions.
- Electrical Rating: Do not exceed the maximum load of 3680W (16A at 230V). Overloading can cause overheating and fire.
- Grounding: Ensure the outlets are plugged into properly grounded wall sockets.
- Children: Keep out of reach of children.
- Cleaning: Unplug the device before cleaning. Use a dry cloth; do not use liquid cleaners.
- Disassembly: Do not attempt to disassemble or repair the device. Contact qualified personnel for service.
3. Package Contents
Verify that all items are present in your package:
- 4 x HBN Remote Control Outlets
- 1 x Remote Control
- 1 x CR2032 Battery (pre-installed in remote)
4. Setup and Pairing
Follow these steps to set up and pair your HBN Remote Control Outlets:
- Install Remote Battery: The remote control comes with a pre-installed CR2032 battery. If needed, open the battery compartment on the back of the remote and insert a new CR2032 battery, ensuring correct polarity.
- Plug in the Outlet: Plug one of the HBN remote control outlets into a standard wall socket. The indicator light on the outlet may flash briefly.
- Pairing the Remote: Within 5 seconds of plugging in the outlet, press and hold the desired 'ON' button (e.g., '1-ON') on the remote control for approximately 3-5 seconds. The indicator light on the outlet will flash rapidly, then turn solid, indicating successful pairing.
- Test Functionality: Press the corresponding 'ON' and 'OFF' buttons on the remote to ensure the outlet responds correctly.
- Repeat for Other Outlets: Repeat steps 2-4 for the remaining three outlets, pairing each to a different channel (e.g., '2-ON/OFF', '3-ON/OFF', '4-ON/OFF') on the remote control.
Image 4.1: Pairing an HBN remote control outlet with the remote.
Note: The remote control can operate outlets individually or all at once if multiple outlets are paired to the same channel, though individual pairing is recommended for distinct control.
5. Operating Instructions
Once paired, using your HBN Remote Control Outlets is straightforward:
- Turning On/Off: Press the 'ON' button for the corresponding channel (1-4) on the remote to turn on the connected appliance. Press the 'OFF' button to turn it off.
- Range: The remote control has an operating range of up to 30 meters (approximately 100 feet) in open areas. Walls and other obstructions may reduce this range.
Image 5.1: Illustration of the 30-meter wireless range within a home environment.
Energy Saving: Using these remote control outlets allows you to completely disconnect appliances from the power supply, reducing standby power consumption and saving energy.
Versatile Applications: These outlets are suitable for controlling a wide range of devices, including lamps, televisions, stereo systems, heaters, coffee machines, and other household appliances, up to their maximum power rating.
Image 5.2: Examples of appliances that can be controlled by the HBN remote outlets.
6. Maintenance
- Cleaning: To clean the outlets or remote, unplug them from the power source and wipe with a dry, soft cloth. Do not use abrasive cleaners or immerse in water.
- Battery Replacement: If the remote control's range decreases or it stops responding, replace the CR2032 battery. Ensure proper disposal of old batteries according to local regulations.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Outlet does not respond to remote. | 1. Remote battery is low or dead. 2. Outlet is out of range. 3. Outlet is not paired correctly. 4. Obstructions blocking signal. | 1. Replace the CR2032 battery in the remote. 2. Move closer to the outlet. 3. Re-pair the outlet with the remote (refer to Section 4). 4. Reduce obstructions between remote and outlet. |
| Appliance connected to outlet does not turn on. | 1. Appliance is not plugged in correctly. 2. Appliance is faulty. 3. Outlet is overloaded. | 1. Ensure the appliance is securely plugged into the remote outlet. 2. Test the appliance in a different socket. 3. Ensure the total power consumption does not exceed 3680W. |
| Outlets lose pairing after a power outage. | The outlets may not retain pairing memory after a complete power loss. | Re-pair the outlets with the remote control after power is restored (refer to Section 4). |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HBN |
| Model Number | SF20250925B086GVB85H |
| Voltage | 230 Volts AC |
| Max. Current | 16 Amperes |
| Max. Power | 3680 Watts |
| Remote Control Range | Up to 30 meters (open area) |
| Remote Battery Type | CR2032 (included) |
| Certifications | CE Certified |
| Dimensions (Outlet) | Approx. 11cm (H) x 6.2cm (W) x 4cm (D) (excluding pins) |
| Dimensions (Remote) | Approx. 8.5cm (H) x 4cm (W) |
Image 8.1: Product dimensions of the HBN remote control outlet and remote.
Image 8.2: Various views of the HBN remote control outlet, highlighting design and technical markings.
9. Warranty and Support
For any questions, technical support, or warranty inquiries regarding your HBN Remote Control Outlet Kit, please refer to the retailer's return policy or contact HBN customer service through the official website or your purchase platform. Please have your model number (SF20250925B086GVB85H) and purchase details ready.
