User Manual for Techbee Digital Infinite Repeat Cycle Timer Plug

Introduction

The Techbee Digital Infinite Repeat Cycle Intermittent Timer Plug is a versatile 3-in-1 device designed to automate your electrical appliances. It features daily ON-OFF timing, countdown and turn ON/OFF functions, and short ON-OFF cycle timing. This manual provides detailed instructions to help you set up, operate, maintain, and troubleshoot your timer plug effectively.

Figure 1: The Techbee Digital Timer Outlet, showcasing its key features including infinite repeat cycle ON-OFF intervals, three groups of daily ON-OFF timers, countdown and turn ON/OFF functionality, child lock to prevent misoperation, and easy access to after-sales service.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• For indoor use only. Do not expose to water or moisture.
• Do not exceed the maximum load capacity of 15A, 1875W.
• Ensure the timer is securely plugged into a grounded outlet.
• Keep out of reach of children. The child lock function should be utilized to prevent accidental operation.
• Do not disassemble or attempt to repair the device. Contact qualified personnel for service.

Product Overview

The Techbee Digital Timer Plug features a large LCD screen for clear display of digits and numbers, along with intuitive buttons for easy programming.

Figure 2: Front view of the Techbee Digital Timer Plug, displaying the LCD screen, power outlet, and control buttons for timing, countdown, and cycle settings.

Components and Controls

• LCD Display: Shows current time, program settings, and countdowns.
• SWITCH/OFF Button: Manually turns the timer ON or OFF.
• HOUR Button: Adjusts hour settings.
• MINUTE Button: Adjusts minute settings.
• ENTER Button: Confirms settings.
• TIMING SETTING Button: Accesses daily ON-OFF timer programs.
• CTD SETTING Button: Accesses countdown timer settings.
• CYCLE SETTING Button: Accesses continuous interval timer settings.
• R (Reset) Button: Resets the timer to factory defaults (requires a pin).

Figure 3: The timer's screen may have an invisible protective film. This can be peeled off for a clearer view or left on.

Figure 4: Physical dimensions of the timer plug, measuring 2.16"D x 2.26"W x 4.33"H.

Setup Instructions

Initial Setup: Clock Setting

Before using the timer, ensure the internal battery is charged by plugging the timer into a live outlet for at least 30 minutes. If the display is blank or malfunctions, press the 'R' button with a pin to reset it.

1. Press the SWITCH/OFF button to turn the timer OFF.
2. Press and hold the ENTER button until the digits on the screen flash.
3. Repeatedly press or press and hold the HOUR button to set the hours.
4. Repeatedly press or press and hold the MINUTE button to set the minutes.
5. Press ENTER to confirm the clock setting.

Important Notes on Clock Setting:

• Only 24-hour (military) time is supported. 12-hour time with AM/PM is not supported.
• This is a 24-hour programmable timer, not a 7-day weekly timer. Setting the day of the week is not supported.
• To use all features, always set the clock time before use.

Operating Instructions

The timer offers multiple functions to automate your devices. Ensure the appliance's ON/OFF switch is always in the ON position for the timer to control it.

Daily ON-OFF Timing (Function 1)

This function allows you to set specific ON and OFF times for your appliance each day.

1. Press SWITCH/OFF to turn the timer OFF.
2. Press TIMING SETTING to set the first ON time. Use HOUR and MINUTE to adjust.
3. Press TIMING SETTING again to set the first OFF time. Use HOUR and MINUTE to adjust.
4. Repeat for up to 3 ON-OFF programs if needed. Leave blank if not needed.
5. Press ENTER to confirm all desired timing programs.

Figure 5: Daily ON-OFF Timer applications, such as turning Christmas lights on at 7:30 PM and off at 11:30 PM every day.

Continuous Interval in Hour & Minute Mode (Function 2)

This mode allows the timer to continuously cycle between ON and OFF intervals, measured in hours and minutes.

1. Press SWITCH/OFF to turn the timer OFF.
2. Press CYCLE SETTING to set the ON interval. Use HOUR and MINUTE to adjust.
3. Press CYCLE SETTING again to set the OFF interval. Use HOUR and MINUTE to adjust.
4. Press ENTER to confirm. The upper screen will alternately show the remaining ON and OFF interval.

Figure 6: Countdown and Turn OFF/ON applications, such as cutting off power after 1.5 hours for chargers or hair tools.

Continuous Interval in Minute & Second Mode (Function 3)

This mode is similar to Function 2 but allows for shorter ON and OFF intervals, measured in minutes and seconds.

1. Press SWITCH/OFF to turn the timer OFF.
2. Press and hold CYCLE SETTING until the top of the screen flashes.
3. Use HOUR to set minutes and MINUTE to set seconds for the ON interval.
4. Press CYCLE SETTING again. Use HOUR to set minutes and MINUTE to set seconds for the OFF interval.
5. Press ENTER to confirm.

Figure 7: Repeat Cycle Timer applications, such as cycling

Related documentsAUB086DN9QT3

RELATED DOCUMENTTechbee T319 Cycle Timer Plug: User Manual and Setup GuideComprehensive instruction manual for the Techbee T319 digital cycle timer plug. Learn how to set the clock, program daily ON/OFF cycles, continuous intervals, countdown timers, and more for efficient appliance control.View document →RELATED DOCUMENTTechbee T319 Cycle Timer Plug User's ManualThe Techbee T319 Cycle Timer Plug is a versatile digital timer designed for household use, offering various programmable modes for automatic control of electrical appliances. Features include clock setting, daily on-off timing, countdown functions (turn off/on), and advanced interval cycle modes (infinite or set duration). It ensures safety with overload protection and includes features like child lock and alarm. Ideal for managing power consumption and automating device operation.View document →