Amplim 3-in-1 Infrared Thermometer (Model 2001F1) User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Amplim 3-in-1 Infrared Thermometer, Model 2001F1. This device is designed for accurate and non-contact temperature measurement for individuals of all ages, including infants, toddlers, children, and adults. It offers multiple measurement modes for versatility and convenience.

2. Product Overview

2.1 Package Contents

• Amplim 3-in-1 Infrared Thermometer
• Base Stand
• 2 x AAA Batteries
• User Manual (this document)
• Warranty Card
• Certificate

2.2 Key Features

• 3-in-1 Measurement Modes: Forehead, Ear, and Object/Room temperature.
• Non-Contact Infrared Technology: Allows for hygienic and comfortable temperature readings.
• Fast and Accurate: Provides quick and reliable results.
• Color-Coded LCD Display: Green for normal, yellow for slightly elevated, and red for fever temperatures.
• Audible Fever Alarm: Alerts when a high temperature is detected.
• Memory Storage: Stores up to 60 previous readings for tracking.
• Unit Switching: Easily switch between Fahrenheit (°F) and Celsius (°C).
• Auto Standby Mode: Automatically powers off after 15 seconds of inactivity to conserve battery.
• Rotatable Screen: For improved readability.
• Built-in Clock: Displays current time.
• Battery Operated: Uses 2 AAA batteries (included).

2.3 Product Components

The image above illustrates the main components of your thermometer, including the probe cover, sensor, LCD display, and various function buttons for mode selection, settings, and memory recall. The device also comes with a base stand for convenient storage.

3. Setup

3.1 Battery Installation

Your thermometer requires 2 AAA batteries, which are included in the package. To install or replace batteries:

1. Locate the battery compartment cover on the back of the thermometer.
2. Slide the cover open.
3. Insert the 2 AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely.

This video demonstrates the battery installation process for Amplim thermometers, ensuring correct placement of positive and negative terminals.

4. Operating Instructions

4.1 Power On/Off

• Power On: Press any button to turn on the thermometer. It will display the last measurement or enter standby mode.
• Power Off: The thermometer will automatically power off after 15 seconds of inactivity. To manually turn off, hold the 'SET' and 'MEM' buttons simultaneously for 3 seconds.

4.2 Mode Selection (Forehead, Ear, Surface, Room)

The thermometer features multiple modes for different measurement needs:

• Forehead Mode: For non-contact body temperature measurement.
• Ear Mode: For in-ear body temperature measurement. Remove the probe cover to activate this mode.
• Surface/Liquid Mode: For measuring the temperature of objects or liquids (e.g., milk, bathwater).
• Room Mode: For measuring ambient room temperature.

To switch between modes, press the dedicated mode buttons on the device. The display will show the active mode icon.

This image illustrates the three primary measurement modes: Ear, Surface, and Room, highlighting the thermometer's versatility.

This video demonstrates how to switch between the different measurement modes available on the Amplim thermometer.

4.3 Temperature Measurement (Forehead Mode)

Ensure the probe cover is attached for forehead mode.

1. Point the thermometer at the center of the forehead, maintaining a distance of 0.3 to 1.2 inches (1-3 cm).
2. Press the Forehead mode button.
3. The temperature reading will appear on the display within 1 second, accompanied by an audible beep.

4.4 Temperature Measurement (Ear Mode)

To use Ear Mode:

1. Gently remove the probe cover. The thermometer will automatically switch to Ear Mode.
2. Carefully insert the probe into the ear canal.
3. Press the Ear mode button.
4. The temperature reading will appear on the display within 1 second, accompanied by an audible beep.

This image shows the thermometer with its probe cover removed, ready for ear temperature measurement.

4.5 Temperature Measurement (Surface/Liquid Mode)

To measure the temperature of an object or liquid:

1. Select the Surface/Liquid mode.
2. Point the thermometer at the object or liquid.
3. Press the measurement button. The temperature will be displayed.

4.6 Temperature Measurement (Room Mode)

To measure ambient room temperature:

1. Select the Room mode.
2. The current room temperature will be displayed on the screen.

4.7 Fahrenheit/Celsius Switching

To switch between Fahrenheit (°F) and Celsius (°C):

1. With the thermometer powered on, hold the 'SET' button for 3 seconds until 'SET' appears on the screen.
2. Press the 'F/°C' button to toggle between Fahrenheit and Celsius.
3. Press 'SET' again to confirm your selection and exit the settings menu.

This video provides a step-by-step guide on how to switch the temperature unit between Fahrenheit and Celsius on your Amplim thermometer.

4.8 Memory Recall

The thermometer can store up to 60 previous temperature readings.

1. Press the 'MEM' button to view the last recorded temperature.
2. Use the 'MEM ▲' (Up) and 'MEM ▼' (Down) buttons to scroll through previous readings.

This video demonstrates how to access and review previous temperature readings stored in the thermometer's memory.

4.9 Sound/Buzzer Control

The thermometer features an audible buzzer for fever alerts and measurement completion. Refer to the quick guide for specific instructions on how to turn the buzzer ON or OFF.

5. Maintenance

5.1 Cleaning and Care

To ensure accurate readings and prolong the life of your thermometer:

• Wipe the thermometer body with a soft, dry cloth.
• For the probe and sensor, use an alcohol swab or a cotton swab lightly moistened with alcohol. Gently wipe the surface.
• Do not immerse the thermometer in water or any other liquid.
• Avoid using abrasive cleaners or harsh chemicals.

5.2 Storage

Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided base stand for convenient and safe storage.

This image shows the thermometer securely placed in its base stand, ready for storage or display.

6. Troubleshooting

6.1 Common Issues and Solutions

• Inaccurate Readings: Ensure the sensor is clean and free of debris. Verify correct measurement distance (0.3-1.2 inches for forehead mode). Allow the thermometer to acclimate to room temperature if it has been in a different environment.
• No Display/Power Issues: Check if batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
• Fever Alarm Not Working: Check the sound/buzzer settings to ensure it is enabled.
• Error Message on Display: Refer to the quick guide or contact customer support for specific error code interpretations.

7. Specifications

8. Warranty and Support

Your Amplim 3-in-1 Infrared Thermometer comes with a warranty card included in the package. Please refer to the warranty card for details regarding coverage and terms. Amplim is a trusted American company committed to quality products and customer satisfaction. For any support needs or inquiries, please refer to the contact information provided on your warranty card or visit the official Amplim website.