Introduction
Thank you for choosing the moofit HR6 Heart Rate Monitor. This device is designed to provide accurate heart rate data for various fitness activities, helping you optimize your training. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your HR6 monitor.
Package Contents
Ensure all items are present in the package:
- moofit HR6 Heart Rate Sensor x 1
- CR2032 Battery (pre-installed in sensor) x 1
- Adjustable Elastic Chest Strap x 1
Product Overview
The moofit HR6 Heart Rate Monitor consists of a sensor and an adjustable chest strap. It utilizes advanced technology to provide precise heart rate measurements.
Image: The moofit HR6 Heart Rate Monitor sensor attached to its black elastic chest strap.
Key Features:
- Accurate Heart Rate Monitoring: Provides precision up to ±1 bpm, superior to optical heart rate sensors.
- Dual Connectivity: Supports both Bluetooth and ANT+ protocols for wide compatibility.
- Comfortable Design: Lightweight (47g) fabric chest strap, adjustable from 65 to 95 cm.
- IP67 Water Resistance: Protects against sweat and water splashes, suitable for most sports (not swimming).
- Long Battery Life: Replaceable CR2032 battery offers 10-12 months of use.
Image: A woman exercising while wearing the moofit HR6 heart rate monitor, with icons indicating Bluetooth, ANT+, Live HR Tracking, Calories, App Compatibility, and IP67 water resistance.
Image: Detailed views of the HR6 sensor, showing the front, back with ANT+ ID and metal connectors, the CR2032 replaceable battery compartment, and the adjustable buckle on the strap.
Image: The moofit HR6 sensor with water droplets on its surface, demonstrating its IP67 sweat and water resistance.
Setup
1. Battery Installation (if not pre-installed)
The CR2032 battery is typically pre-installed. If you need to install or replace it:
- Locate the battery cover on the back of the sensor.
- Use a coin to gently twist the cover counter-clockwise to open.
- Insert the CR2032 battery with the positive (+) side facing upwards.
- Replace the cover and twist clockwise to secure it.
2. Attaching and Adjusting the Chest Strap
- Attach the sensor to the two snap fasteners on the chest strap.
- Moisten the two electrode areas on the back of the chest strap with water or electrode gel. This ensures good contact with your skin.
- Place the chest strap around your chest, just below your pectoral muscles. The sensor should be centered on your chest.
- Adjust the strap length using the buckle for a snug, comfortable fit. It should be tight enough to stay in place but not restrict breathing.
Image: A four-step diagram illustrating how to attach the sensor to the strap, moisten the electrodes, adjust the strap, and wear the monitor correctly around the chest.
Image: A woman running while wearing the moofit HR6 heart rate monitor, alongside diagrams showing the adjustable strap length (65-95cm) and sensor dimensions (5.8cm x 3.4cm).
Operating Instructions
1. Pairing with Devices and Apps
The moofit HR6 supports both Bluetooth and ANT+ connectivity. Ensure the monitor is worn correctly and active (heart rate detected) before attempting to pair.
- For Bluetooth Pairing:
- Enable Bluetooth on your smartphone, sports watch, or fitness equipment.
- Open your preferred fitness app (e.g., Strava, Zwift, Wahoo Fitness, Peloton, etc.) or navigate to the sensor pairing menu on your device.
- Search for new sensors. The moofit HR6 should appear as "moofit HR6" or a similar identifier.
- Select the device to pair.
- For ANT+ Pairing:
- Ensure your cycling computer, GPS watch, or fitness equipment supports ANT+.
- Navigate to the sensor pairing menu on your ANT+ compatible device.
- Search for new sensors. The moofit HR6 will be detected automatically.
- Select the device to pair.
Note: The moofit HR6 can connect to multiple Bluetooth devices simultaneously (e.g., a phone and a watch) and an unlimited number of ANT+ devices.
Image: Illustration showing the moofit HR6 sensor connecting via Bluetooth and ANT+ to a smartphone app displaying heart rate data, a sports watch, a cycling computer, and a treadmill.
Image: A person running while wearing the moofit HR6, with a smartphone displaying fitness data and logos of various compatible third-party fitness applications.
2. During Exercise
Once paired, your device or app will display your real-time heart rate. The HR6 continuously transmits data, allowing you to monitor your intensity and calorie consumption.
- Ensure the strap remains snug to maintain good skin contact.
- Refer to your connected device or app for heart rate zones, training metrics, and workout summaries.
Maintenance
1. Cleaning the Chest Strap
After each use, detach the sensor from the strap. Rinse the elastic strap under running water and hang it to dry. Do not machine wash or tumble dry the strap, as this can damage the electrodes.
2. Cleaning the Sensor
Wipe the sensor clean with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the sensor is dry before storing.
3. Battery Replacement
When the battery is low, your connected device or app may indicate a weak signal or no heart rate data. Replace the CR2032 battery as described in the "Setup" section. Dispose of used batteries responsibly.
Image: The moofit HR6 heart rate sensor separated from its elastic chest strap, ready for cleaning or battery replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No heart rate reading / erratic readings |
|
|
| Cannot pair with device/app |
|
|
| Short battery life |
|
|
Specifications
| Model | HR6 |
| Brand | moofit |
| Color | Black |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Weight | 47 Grams |
| Dimensions (Sensor) | 5.8 cm x 3.4 cm x 1.15 cm (approx.) |
| Strap Length | Adjustable from 65 cm to 95 cm |
| Water Resistance | IP67 (Sweat and splash proof, not for swimming) |
| Connectivity | Bluetooth, ANT+ |
| Battery Type | CR2032 (Lithium-ion) |
| Battery Life | 10-12 months (typical use) |
| Compatible Devices | iOS/Android smartphones, sports watches, cycling computers, fitness equipment with Bluetooth/ANT+ support. |
| UPC | 779296047692 |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact moofit customer service directly. The product typically includes a standard manufacturer's warranty.
If you have any questions or encounter issues with your moofit HR6 Heart Rate Monitor, please reach out to moofit customer support via the Amazon messaging system or their official website. They offer 24/7 online customer service.
