Moukey MAMP2 Mini Amplifier User Manual

Introduction

Thank you for choosing the Moukey MAMP2 Mini Amplifier. This compact and powerful audio receiver is designed to enhance your home audio experience with versatile input options including Bluetooth 5.0, USB, AUX, and FM radio. Please read this manual carefully to ensure proper setup and operation of your device.

Key Features

• Compact and Powerful: Small design (4.85"W x 3.05"D x 1.65"H) with 50W peak power dual-channel sound, utilizing an original AC6922A amplifier chip.
• Bluetooth 5.0 Connectivity: Upgraded Bluetooth 5.0 ensures stable connection up to 50ft with low latency, supporting speakers with 4-16 ohm impedance.
• Multiple Input Sources: Supports AUDIO (RCA), USB (up to 32G, MP3/APE/WAV/WMA formats), and wireless Bluetooth connection.
• FM Radio Function: Integrated FM mode for news, music, sports, and finance.
• Remote Control: Infrared remote control for volume and mode adjustments. Note: Remote controls amplifier volume only, not external equipment volume, and cannot select songs in AUX mode.

Package Contents

• Moukey MAMP2 Mini Amplifier
• Remote Controller
• Power Supply (DC12V/3A)
• FM Antenna

Setup Guide

1. Connecting Speakers

Connect your passive speakers to the "ROUT LOUT" (Left/Right Output) terminals on the rear panel of the amplifier. Ensure correct polarity (red to positive, black to negative) for optimal sound quality. The amplifier supports speakers with 4-16 ohm impedance.

Image: Rear panel connections of the Moukey MAMP2 amplifier, illustrating speaker and input ports.

2. Connecting Power

Plug the provided DC12V/3A power supply into the "DC12/3A" port on the rear of the amplifier, then connect the power supply to a wall outlet.

3. Connecting Input Sources

The MAMP2 amplifier offers multiple ways to connect your audio sources:

• Bluetooth Connection:

  Switch the amplifier to Bluetooth mode using the "MODE" button. The BT indicator light will illuminate. On your device (e.g., smartphone, tablet), enable Bluetooth and search for "MAMP2". Select it to connect. A beep sound will confirm successful pairing (if speakers are connected).

  

  Image: The Moukey MAMP2 amplifier demonstrating wireless Bluetooth connectivity with a smartphone.

• AUX/RCA Input:

  Connect external audio sources such as DVD players, TVs, computers, or MP3 players to the "RIGHT AUDIO INPUT" and "LEFT AUDIO INPUT" RCA ports on the rear panel using an RCA cable. Switch the amplifier to AUX mode.

• USB Input:

  Insert a USB flash drive (maximum 32GB) containing music files (MP3, APE, WAV, WMA formats) into the USB port on the front panel. The amplifier will automatically switch to USB mode and begin playback.

• FM Radio:

  Extend the FM antenna located on the rear of the amplifier for better reception. Switch the amplifier to FM mode using the "MODE" button. Use the remote control to scan for stations.

  

  Image: Illustration of the extendable FM antenna on the Moukey MAMP2 amplifier, highlighting its length.

Image: A comprehensive diagram illustrating the various input (BT, RCA) and output (speakers) connection modes for the Moukey MAMP2 amplifier.

Operating Instructions

Power On/Off

Rotate the "VOL/POWER" knob clockwise to turn the amplifier on. Rotate counter-clockwise until it clicks to turn off. The remote control also has an ON/OFF button.

Mode Selection

Press the "MODE" button on the front panel or the remote control to cycle through available input modes: Bluetooth (BT), FM Radio, USB, and AUX (RCA).

Volume, Treble, and Bass Control

• Volume: Adjust the main volume using the large "VOL/POWER" knob on the front panel or the Volume +/- buttons on the remote control.
• Treble: Use the "TREBLE" knob on the front panel to adjust high-frequency sounds.
• Bass: Use the "BASS" knob on the front panel to adjust low-frequency sounds.

Remote Control Functions

The included infrared remote control provides convenient access to various functions:

Image: Detailed layout of the Moukey MAMP2 remote control, indicating the function of each button.

• ON/OFF: Power on or off the amplifier.
• MODE: Switch between input modes (BT, FM, USB, AUX).
• CH-/CH+: In FM mode, navigate between radio stations.
• EQ: Adjust equalization presets (if available).
• Play/Pause: Play or pause media playback (USB/Bluetooth modes).
• Previous/Next: Skip to the previous or next track (USB/Bluetooth modes).
• Volume +/-: Adjust the amplifier's volume.
• Numeric Buttons (0-9): For direct track selection or FM frequency input (functionality may vary).

Maintenance

• Keep the amplifier in a dry, well-ventilated area away from direct sunlight, heat sources, and moisture.
• Clean the unit with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Ensure proper ventilation around the unit to prevent overheating.
• Avoid placing heavy objects on top of the amplifier.

Troubleshooting

Bluetooth Connection Issues

If Bluetooth is not working or the connection is unstable, try the following:

1. Ensure the amplifier is in Bluetooth mode (BT indicator light should be on). If not, press the "MODE" button to switch.
2. Turn on Bluetooth on your input device (e.g., mobile phone), search for "MAMP2", and click to connect. A beep indicates a successful connection (speakers must be connected).
3. Ensure there are no obstacles, especially metal objects, blocking the signal between your device and the amplifier.
4. Turn off the amplifier, disconnect, and clear the connection from your Bluetooth transmitting device, then attempt to reconnect.

Connecting Two Devices via Bluetooth

The Moukey MAMP2 amplifier is designed to connect to one Bluetooth device at a time. Connecting two devices simultaneously will disrupt the audio stream. Disconnect the current device before connecting another.

Connecting to a Bluetooth Speaker

The MAMP2 amplifier is a Bluetooth receiver, not a transmitter. It cannot connect to a Bluetooth speaker. Bluetooth speakers already have their own internal amplifiers, and attempting to amplify them further with another amplifier may cause damage.

Connecting an External Bluetooth Receiver

If you wish to use an external Bluetooth receiver, connect its output end to an input port on the MAMP2 amplifier, such as the 3.5mm AUX port or the RCA AUDIO INPUT ports. Ensure you use the correct port interface converter if necessary.

Specifications

Image: The Moukey MAMP2 amplifier shown with its physical dimensions and a table detailing its technical specifications.

Warranty and Support

Moukey products are designed for reliability and performance. For warranty information or technical support, please refer to the official Moukey website or contact their customer service directly. Keep your purchase receipt for warranty claims.

For further assistance, you may visit the Moukey Store on Amazon.