VEGA VHSH-25

VEGA Ultra Shine Hair Straightener VHSH-25 User Manual

Model: VHSH-25

1. Important Safety Information

Please read all instructions carefully before using the VEGA Ultra Shine Hair Straightener. Keep this manual for future reference.

2. Product Overview

The VEGA Ultra Shine Hair Straightener is designed for efficient hair styling with ceramic-coated plates. Below are its key features:

VEGA Ultra Shine Hair Straightener

Image 2.1: The VEGA Ultra Shine Hair Straightener in its closed position, showcasing its sleek black design and pink ceramic plates.

3. Setup

  1. Unpack: Carefully remove the straightener from its packaging.
  2. Inspect: Check the appliance for any signs of damage. Do not use if damaged.
  3. Placement: Place the straightener on a heat-resistant, flat surface.
  4. Plug In: Insert the power plug into a suitable electrical outlet (110-240V).

4. Operating Instructions

  1. Prepare Hair: Ensure your hair is clean, dry, and tangle-free. For best results, use a heat protectant spray.
  2. Turn On: Slide the On/Off switch to the 'On' position. The power indicator light will illuminate.
  3. Heat Up: Allow the straightener to heat up for a few moments. It features quick heat-up technology.
  4. Section Hair: Divide your hair into small, manageable sections.
  5. Straighten: Take one section of hair and place it between the heating plates, close to the roots. Gently clamp the plates together and glide the straightener slowly down the hair section, from roots to ends.
  6. Repeat: Repeat the process for all sections of hair until desired straightness is achieved.
  7. Turn Off: After use, slide the On/Off switch to the 'Off' position. The power indicator light will turn off.
  8. Cool Down: Allow the appliance to cool completely before storing.

5. Maintenance and Care

6. Troubleshooting

ProblemPossible CauseSolution
Straightener does not turn on.Not plugged in correctly; Power outlet issue; Appliance fault.Ensure plug is fully inserted. Test with another outlet. If problem persists, contact customer support.
Straightener not heating up.On/Off switch not engaged; Appliance fault.Ensure the On/Off switch is in the 'On' position. If no heat, contact customer support.
Hair is not straightening effectively.Hair too wet; Sections too large; Straightener not hot enough.Ensure hair is completely dry. Use smaller sections. Allow sufficient heat-up time.

7. Specifications

FeatureDetail
Model NumberVHSH-25
BrandVEGA
Plate MaterialCeramic
Plate Width35 mm
ColorBlack
Power SourceCorded Electric
Product Dimensions10.24 x 1.57 x 0.98 inches
Item Weight334 Grams (11.78 ounces)
ManufacturerVEGA

8. Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official VEGA website. Warranty terms and conditions may vary by region.

If you experience any issues not covered in this manual, please contact VEGA customer service for assistance.

Related Documents - VHSH-25

Preview VEGA Salon Smooth Hair Straightener VHSH-42 User Manual
Comprehensive user manual for the VEGA Salon Smooth Hair Straightener VHSH-42, covering maintenance, safety instructions, usage, and styling tips.
Preview VEGA VHTH-14 Rechargeable Beard Trimmer User Manual & Guide
Comprehensive user manual for the VEGA VHTH-14 rechargeable beard trimmer. Learn about features, usage, cleaning, maintenance, safety, and warranty information provided by VEGA.
Preview Vega P1 Beard Trimmer User Manual
User manual for the Vega P1 Beard Trimmer, providing instructions on usage, cleaning, maintenance, safety precautions, and warranty information.
Preview VEGABAR 82 Profibus PA Operating Instructions
Comprehensive operating instructions for the VEGABAR 82 pressure transmitter with Profibus PA communication and a ceramic measuring cell. Covers installation, setup, operation, maintenance, and troubleshooting.
Preview VEGASON 61: Istruzioni d'uso per Sensore Ultrasonoro Foundation Fieldbus
Guida completa alle istruzioni d'uso per il sensore ultrasonoro VEGASON 61 di VEGA con tecnologia Foundation Fieldbus. Copre installazione, funzionamento, manutenzione e risoluzione dei problemi.
Preview VEGAPULS 66 Radar Seviye Sensörü Kullanım Kılavuzu
Bu kullanım kılavuzu, VEGA tarafından üretilen VEGAPULS 66 radar seviye sensörünün montajı, bağlantısı, devreye alınması, kullanımı ve bakımı hakkında detaylı bilgi sağlar. Sıvıların sürekli seviye ölçümü için tasarlanmış bu cihazın özelliklerini ve işletim talimatlarını içerir.