Introduction
This instruction manual provides detailed guidance for the assembly, operation, maintenance, and troubleshooting of your Tribesigns 5-Tier Industrial Bookshelf, model BL-AIL-102. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Safety Information
- Ensure all parts are present and undamaged before beginning assembly.
- Assemble the unit on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging components.
- Always use the provided anti-tip kit to secure the bookshelf to a wall, especially in homes with children or pets, to prevent tipping hazards.
- Do not exceed the maximum weight capacity per shelf (25 kg). Distribute weight evenly.
- Keep small parts away from children during assembly.
Package Contents
Please verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Shelf boards (5 pieces)
- Metal frame components (vertical supports, X-shaped crossbars)
- Adjustable leg pads
- Assembly hardware (screws, bolts, Allen wrench)
- Anti-tip kit (wall anchor, strap)
- Instruction manual
Setup and Assembly
Assembly typically takes 20-25 minutes. We recommend arranging all elements according to their labels and following the instructions step-by-step.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list to identify each piece.
- Assemble the Frame: Begin by connecting the vertical metal supports using the provided hardware. Ensure the frame is stable before proceeding.
- Attach X-shaped Crossbars: Secure the X-shaped crossbars to the back of the frame. These provide additional stability.
- Install Shelf Boards: Place each shelf board onto the designated positions on the frame. Secure them with the appropriate screws.
- Attach Adjustable Leg Pads: Screw the adjustable leg pads into the bottom of the vertical supports. These help stabilize the bookshelf on uneven floors and prevent scratches.
- Secure to Wall (Recommended): Using the anti-tip kit, secure the top of the bookshelf to a wall. This is a crucial safety step to prevent accidental tipping.
Image: Dimensions and weight capacity diagram. This image illustrates the overall dimensions of the bookshelf (180cm height, 105cm width, 29.5cm depth) and indicates a maximum weight capacity of 25 kg per shelf.
Image: Stability features. This image highlights the X-shaped reinforcement bar at the back for enhanced stability and the adjustable leg pads designed to prevent scratches and wobbling on uneven surfaces.
Operating and Usage
The Tribesigns 5-Tier Industrial Bookshelf is designed for versatile storage and display. To ensure optimal performance and longevity:
- Weight Distribution: Distribute items evenly across the shelves. Avoid placing all heavy items on a single shelf or side. Each shelf can support up to 25 kg.
- Placement: Position the bookshelf on a flat, stable surface. Use the adjustable leg pads to compensate for minor floor irregularities.
- Intended Use: This unit is suitable for storing books, decorative items, media devices, plants, and family photos. It is designed for indoor use in living rooms, offices, bedrooms, or similar spaces.
Image: Bookshelf in a living room. This image shows the fully assembled bookshelf integrated into a living room, displaying various items like books, vases, and framed pictures.
Maintenance
Proper care will extend the life and appearance of your bookshelf.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Dusting: Regularly dust the shelves and frame to prevent buildup.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Moisture: Protect the bookshelf from excessive moisture and direct sunlight to prevent warping or fading.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bookshelf wobbles | Uneven floor; loose connections | Adjust the leg pads until stable. Check and tighten all screws. Ensure the anti-tip kit is properly installed. |
| Difficulty assembling parts | Misaligned holes; incorrect part orientation | Double-check the instruction manual for correct orientation. Do not force parts; gently adjust alignment. If holes are severely misaligned, contact customer support. |
| Shelf sags or bows | Exceeded weight capacity | Reduce the weight on the shelf. Redistribute items evenly. Ensure no single shelf exceeds 25 kg. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model | BL-AIL-102 |
| Color | Rustic Brown |
| Dimensions (L x W x H) | 105 cm x 29.5 cm x 180 cm |
| Weight | 27 kg |
| Maximum Weight Capacity per Shelf | 25 kg |
| Material | Engineered Wood, Iron Frame |
| Number of Shelves | 5 |
| Special Features | Space-saving design, X-shaped back reinforcement, Adjustable leg pads |
Warranty and Support
Tribesigns stands behind the quality of its products.
- Warranty: Tribesigns provides an 18-month free replacement warranty for manufacturing defects.
- Customer Service: For any questions, concerns, or assistance with assembly or parts, please contact Tribesigns professional customer service. Refer to your purchase documentation for contact details.
