Everbeam 365nm 100W UV LED Black Light Instruction Manual

1. Important Safety Information

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• UV-A Light: This product emits UV-A light. While generally considered safe for eyes and skin, do not stare directly into the light source for extended periods, as it may cause discomfort or dizziness.
• Heat Generation: The unit generates heat during operation. Ensure adequate ventilation and avoid covering the heat sink. Do not touch the light housing immediately after prolonged use.
• Electrical Safety: Ensure the power cord and plug are in good condition. Do not operate with damaged cords. Connect to a grounded outlet.
• Water Resistance: This unit is IP66 waterproof, suitable for outdoor use in wet conditions. However, avoid submerging the unit in water.
• Installation: Ensure the unit is securely mounted or placed on a stable surface to prevent falling.

2. Product Overview

The Everbeam 365nm 100W UV LED Black Light is designed for broad ultraviolet illumination. It features a robust construction and flexible mounting options.

• Wavelength: 365nm UV-A LED bulbs for strong fluorescence.
• Power: 100W output.
• Coverage: 120-degree beam angle, providing wide illumination.
• Durability: Aluminum alloy housing and tempered shatterproof lens for impact resistance and longevity.
• Cooling: Advanced cooling structure with a full-body heat sink design to prevent overheating and extend the 50,000-hour operating lifespan.
• Waterproof Rating: IP66, suitable for outdoor environments (0-100°F and 45%-95% humidity).
• Mounting: 180° adjustable bracket with three preset sockets for easy installation on walls or ground placement.
• Power Cord: 5 ft long power cord with a 3-prong plug.

Image 2.1: Overview of the Everbeam 100W UV LED Black Light, highlighting its adjustable bracket, aluminum case with waterproof design, 5 ft long cable with 3-prong plug, heat sinks for thermal dissipation, and enhanced output stability with smart IC protection.

3. Setup and Installation

The Everbeam UV LED Black Light offers versatile installation options for various applications.

1. Wall Mounting:
   • Identify a suitable mounting location on a wall. The bracket has three preset sockets for secure attachment.
   • Secure the bracket to the wall using appropriate fasteners (not included) through the designated holes.
   • Adjust the light fixture to the desired angle using the 180° adjustable bracket.
2. Ground Placement:
   • Place the light on a stable, flat surface.
   • Adjust the bracket to position the light at the desired angle.
3. Power Connection:
   • Plug the 5 ft long power cord into a standard grounded electrical outlet.

Image 3.1: Visual guide for installation, showing wall mount, angle adjustment, and plugging in the unit. The light can also sit conveniently on the ground.

4. Operating Instructions

Once installed and connected to power, the Everbeam UV LED Black Light is ready for operation.

• Power On/Off: Use the switch on the power cord to turn the light on or off.
• Angle Adjustment: The 180° adjustable bracket allows for precise aiming of the light. Loosen the side screws, adjust the angle, and then tighten the screws to secure the position.
• Coverage: The 100W unit provides approximately 1220 sq ft of coverage. For larger areas or enhanced effects, multiple units can be used.

Image 4.1: Table illustrating the approximate coverage area for 10W (100 sq ft), 50W (530 sq ft), and 100W (1220 sq ft) models, along with a visual representation of the 120° beam angle.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Everbeam UV LED Black Light.

• Cleaning: Disconnect power before cleaning. Use a soft, damp cloth to wipe the exterior. Avoid abrasive cleaners or solvents that could damage the finish or lens.
• Heat Sink: Periodically check the heat sink fins on the back of the unit for dust or debris accumulation. Clean gently with a soft brush or compressed air to maintain efficient thermal dissipation.
• Storage: When not in use for extended periods, store the light in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Regularly inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and replace the cord if possible, or contact support.

Image 5.1: Close-up view of the heat sink on the back of the Everbeam UV LED Black Light, designed for better thermal dissipation.

Image 5.2: The Everbeam UV LED Black Light operating outdoors in rainy conditions, demonstrating its IP66 waterproof rating and ability to function in 0-100°F and 45%-95% humidity.

6. Troubleshooting

If you encounter issues with your Everbeam UV LED Black Light, refer to the following common problems and solutions:

• Light Does Not Turn On:
  • Check if the power cord is securely plugged into a working electrical outlet.
  • Ensure the power switch on the cord is in the 'ON' position.
  • Verify that the electrical outlet is functional by plugging in another device.
• Light Appears Dim or Flickers:
  • Ensure the unit is receiving stable power. Fluctuations in power supply can affect performance.
  • Check for any visible damage to the LED array or lens.
  • If individual LEDs are out, this may indicate component failure. Contact customer support.
• Unit Overheats:
  • Ensure the heat sink fins are clear of obstructions and dust.
  • Operate the unit in an environment within the specified temperature range (0-100°F).
  • Avoid operating the light in enclosed spaces without adequate airflow.
• Water Penetration (despite IP66 rating):
  • While IP66 rated, extreme conditions or physical damage can compromise the seal. Inspect the housing for cracks or loose components.
  • Ensure all cable glands are properly tightened.

7. Specifications

8. Warranty and Support

This product is eligible for a 30-day refund/replacement return policy. For specific warranty details beyond this period or for technical support, please refer to the manufacturer's official website or contact Everbeam customer service directly.