1. Introduction
This manual provides essential instructions for the setup and operation of your Easytry123 replacement remote control. This remote is designed to be compatible with specific Fujitsu AC air conditioner models, including AR-RCE3E, AR-RCE1E, AR-RCD1C, AR-RCD1E, and AR-RCE1C. Please ensure your original remote control matches the appearance of this replacement unit for optimal compatibility and functionality.
As a replacement unit, some advanced functions present on your original remote may not be fully replicated. Refer to your air conditioner's original manual for detailed information on specific AC unit features.
2. Product Overview
Image 2.1: Front view of the Easytry123 replacement remote control. The remote is light gray with a black display screen at the top and various control buttons below it. Buttons include MODE, SET TEMP, FAN, START/STOP, TIMER, SLEEP, ON/OFF, and specific Fujitsu model numbers like AR-RCE3E are visible on the display area.
The Easytry123 replacement remote control is an infrared (IR) device designed for ease of use. It features a clear LCD display and ergonomically arranged buttons for controlling your Fujitsu air conditioner. The remote operates using infrared technology, requiring a direct line of sight to the air conditioner's IR receiver.
3. Setup: Battery Installation
Your remote control requires two (2) AAA batteries for operation. Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the release tab (if present) to open it.
- Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Image 3.1: View of the remote control with the battery compartment cover removed, showing the two slots for AAA batteries and the positive/negative indicators.
Important:
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
4. Operating Instructions
Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the AC unit.
Key Functions:
| Button | Function |
|---|---|
| ON/OFF | Powers the air conditioner on or off. |
| MODE | Cycles through operating modes: Auto, Cool, Dry, Fan. |
| SET TEMP ▲ / ▼ | Adjusts the desired temperature setting. |
| FAN | Adjusts fan speed: Auto, High, Med, Low, Quiet. |
| START/STOP | Initiates or stops a programmed operation, often used with timer functions. |
| TIMER | Sets the on/off timer for the air conditioner. |
| SLEEP | Activates or deactivates the sleep mode, which adjusts temperature for comfortable sleep. |
| SWING | Controls the louver swing function for air distribution. |
| RESET | Resets certain settings or the remote itself. |
| TEST RUN | Used for initial testing of the air conditioner unit (typically by technicians). |
For specific operational details of your Fujitsu air conditioner's features, please consult the original air conditioner user manual.
5. Troubleshooting
- Remote not responding:
- Ensure batteries are installed correctly with correct polarity.
- Replace old batteries with new AAA batteries.
- Check for any obstructions between the remote and the air conditioner's receiver.
- Ensure you are within the effective operating range (typically up to 8 meters / 26 feet).
- Air conditioner not responding to all commands:
- This replacement remote may not support all advanced functions of your original Fujitsu remote. Verify if the function is listed in Section 4.
- Some air conditioner models may have unique features not universally supported by replacement remotes.
- Display on remote is dim or blank:
- Replace batteries immediately.
6. Specifications
- Brand: Easytry123
- Compatible Models: Fujitsu AR-RCE3E, AR-RCE1E, AR-RCD1C, AR-RCD1E, AR-RCE1C
- Connectivity Technology: Infrared (IR)
- Power Source: 2 x AAA Batteries (not included)
- Special Feature: Ergonomic design, direct replacement functionality
- Number of Buttons: 12 (approximate, depending on specific model)
7. Warranty and Support
This Easytry123 replacement remote control is intended as a functional substitute for your original Fujitsu remote. For any issues, questions, or support regarding this replacement remote, please contact the seller directly through your purchase platform. Please note that warranty terms are subject to the seller's policies.
For technical support related to your Fujitsu air conditioner unit itself, please refer to the official Fujitsu documentation or contact Fujitsu customer service.
