Texas Pro Trim 600

Texas Pro Trim 600 High Grass Trimmer User Manual

Model: Pro Trim 600

1. Safety Information

Always read and understand this manual before operating the Texas Pro Trim 600. Failure to follow instructions can result in serious injury or property damage. Keep this manual for future reference.

General Safety Rules:

2. Product Overview

The Texas Pro Trim 600 is a powerful high grass trimmer designed for efficient clearing of dense grass and undergrowth. It combines the robust cutting capability of a brush cutter with the maneuverability of a walk-behind mower.

Texas Pro Trim 600 High Grass Trimmer, front-side view
The Texas Pro Trim 600, showcasing its robust design and large wheels for easy maneuverability.
Side view of the Texas Pro Trim 600
Side view illustrating the ergonomic handle and engine housing.
Underside view of the Texas Pro Trim 600 trimmer head
Close-up of the trimmer head with the durable 4mm trimmer line.
Close-up of the 14-inch wheel on the Texas Pro Trim 600
Detail of the large 14-inch wheel, designed for easy navigation over uneven terrain.

Key Features:

3. Setup

Assembly:

The Texas Pro Trim 600 requires some assembly before first use. Refer to the included assembly diagram for detailed steps. Typically, this involves:

Fuel and Oil Preparation:

This unit uses a 4-stroke engine and requires both gasoline and engine oil. Do not mix oil with gasoline.

Oil change kit with syringe and funnel
An example of an oil change kit, useful for proper oil management.

4. Operating Instructions

Starting the Engine:

  1. Ensure the fuel tank is filled and the oil level is correct.
  2. Move the throttle lever to the 'CHOKE' position (for cold start).
  3. Press the primer bulb 2-3 times until fuel is visible in the bulb.
  4. Pull the starter cord firmly and steadily until the engine starts. It may take 2-4 pulls.
  5. Once the engine starts, gradually move the throttle lever to the 'RUN' position.

Adjusting Cutting Height:

The cutting height can be adjusted between 4.5 cm and 9.0 cm. Refer to the specific adjustment mechanism on your unit, typically involving repositioning the wheels or the cutting deck. Always turn off the engine before making height adjustments.

Maneuvering and Cutting:

Push the trimmer forward at a steady pace. For very tall or dense grass, it may be beneficial to make two passes: one at a higher cutting height, and a second at the desired lower height. Overlap each pass slightly to ensure complete coverage.

User operating the Texas Pro Trim 600 in a field of tall grass
A user demonstrating the effective use of the trimmer in tall grass.
User operating the Texas Pro Trim 600, closer view
Closer view of the trimmer in action, highlighting its ability to clear dense vegetation.

Stopping the Engine:

To stop the engine, move the throttle lever to the 'STOP' position. Allow the engine to cool down before storing.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Texas Pro Trim 600.

Engine Maintenance:

Trimmer Line Replacement:

The Texas Pro Trim 600 uses a durable 4 mm trimmer line. When the line wears down, replace it according to the instructions provided with your replacement line. Always use the recommended line thickness.

Cleaning and Storage:

6. Troubleshooting

ProblemPossible CauseSolution
Engine won't startNo fuel, old fuel, incorrect choke setting, fouled spark plug, carburetor issues.Check fuel level, use fresh fuel, adjust choke, clean/replace spark plug, consult service for carburetor adjustment.
Poor cutting performanceWorn or incorrect trimmer line, engine bogging down, cutting too much at once.Replace trimmer line with 4mm line, reduce cutting load, check engine maintenance.
Excessive vibrationDamaged trimmer head, loose components, unbalanced line.Inspect trimmer head for damage, tighten all fasteners, ensure line is properly installed.

7. Specifications

FeatureDetail
ModelPro Trim 600
Engine Displacement173 cm³
Engine Type4-stroke, Gasoline
Working Width60 cm
Cutting Height4.5 - 9.0 cm
Trimmer Line Diameter4 mm
Wheels14-inch
Product Dimensions56 x 81 x 56 cm
Weight33 Kilograms
MaterialAlloyed Steel

8. Warranty and Support

Texas is committed to providing high-quality products and excellent customer service. For any questions regarding your Texas Pro Trim 600, including warranty claims or technical support, please contact the seller or manufacturer directly.

This product is supplied by a small to medium-sized business from Germany, Austria, or Switzerland, which partners with Amazon. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the seller.

You can often find contact information for the seller on your purchase receipt or through your Amazon order history.

Related Documents - Pro Trim 600

Preview Texas BCU33S/BCU43S/BCU43D/BCU43 Brush Cutter & Grass Trimmer Manual
This manual provides operating instructions, safety guidelines, and maintenance information for the Texas BCU33S, BCU43S, BCU43D, and BCU43 brush cutters and grass trimmers. Learn about assembly, fuel, starting, stopping, and troubleshooting.
Preview Texas Multi Cut 610 User Manual
Comprehensive user manual for the Texas Multi Cut 610 gasoline lawnmower, covering setup, operation, maintenance, safety, and troubleshooting. Includes technical specifications and warranty information.
Preview Texas Smart Combi 100 Electric Brushcutter - Instruction Manual
Comprehensive instruction manual for the Texas Smart Combi 100 electric brushcutter, detailing assembly, operation, safety warnings, specifications, and troubleshooting for its various attachments. This multi-tool allows users to switch between grass trimming, chainsaw, and hedge trimming functions.
Preview Texas CB 8700 Scythe Mower User Manual
Comprehensive user manual for the Texas CB 8700 scythe mower, covering safety precautions, assembly instructions, operation, maintenance, and warranty information.
Preview Texas BCZ 5800 Grass Trimmer User Manual
Comprehensive user manual for the Texas BCZ 5800 grass trimmer, covering safety instructions, assembly, operation, maintenance, and specifications. Learn how to safely and effectively use your Texas BCZ 5800.
Preview Texas WP358S Water Pump User Manual - Operation, Maintenance, and Safety
Comprehensive user manual for the Texas WP358S water pump, covering operation, safety precautions, maintenance, specifications, and warranty information. Includes detailed instructions for setup, starting, stopping, and care.