1. Introduction
Thank you for choosing the MOUNT-IT! MI-386 Motorized Fireplace TV Wall Mount. This product is designed to provide a convenient and adjustable viewing experience for your television, allowing it to be lowered from above a fireplace or other high wall positions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Image 1.1: The MOUNT-IT! MI-386 Motorized Fireplace TV Wall Mount with its remote control.
2. Safety Information
Always follow these safety guidelines to prevent injury or damage to your equipment:
- Ensure the mounting surface can support the combined weight of the mount and your television.
- Do not exceed the maximum weight capacity of 77 lbs (35 kg).
- Use appropriate tools and follow all installation steps carefully.
- Keep children and pets away from the mount during operation.
- Do not obstruct the movement of the mount or the television.
- If you encounter any difficulties, consult a qualified professional.
3. Package Contents
Verify that all components are present before beginning installation. Refer to the included parts list in your physical manual for a complete inventory.

Image 3.1: Illustration of the motorized mount lowering a TV to eye level.
4. Setup and Installation
This section outlines the steps for installing your motorized TV wall mount. It is recommended to have at least two people for installation.
4.1 Pre-Installation Checks
- Wall Type: The mount is designed for solid walls or double studs with 16-inch spacing. Ensure your wall structure is suitable.
- TV Compatibility: The mount supports VESA patterns from 200x100mm to 600x400mm and TVs between 37" and 70".
- Weight Capacity: Do not exceed the maximum weight of 77 lbs (35 kg).
- Vertical Clearance: Calculate the necessary vertical clearance based on your TV height and mantel size. Refer to the diagram below for guidance.

Image 4.1: Guide for calculating vertical clearance needed for installation.
4.2 Mounting the Wall Plate
- Determine the desired mounting height and center point for your TV.
- Use the provided template to mark drilling locations on the wall. Ensure the marks are level.
- Drill pilot holes and securely attach the wall plate to the wall using appropriate fasteners.
Video 4.1: Installation overview showing the process of mounting the bracket and attaching the TV.
4.3 Attaching TV Brackets
- Attach the vertical TV brackets to the back of your television using the correct VESA screws and spacers.
- Ensure the brackets are securely fastened and evenly spaced.

Image 4.2: VESA compatibility and weight capacity details for the mount.
4.4 Hanging the TV and Cable Management
- Carefully lift the television and hook the TV brackets onto the wall mount.
- Secure the TV to the mount using the safety screws or locking mechanisms.
- Connect all necessary cables (power, HDMI, etc.). Use the integrated cable clips to organize and route cables neatly along the mount arms.

Image 4.3: Features of the mount including the motor, remote, and cable management clips.
5. Operating Instructions
The MOUNT-IT! MI-386 is operated using the included remote control.
5.1 Remote Control Functions
- Up/Down Arrows: Press to raise or lower the television.
- Memory Buttons (mem1, mem2): Program and recall two custom preset viewing positions. To set a position, move the TV to the desired height, then press and hold a memory button until the indicator light flashes. To recall, simply press the corresponding memory button.
5.2 Manual Adjustments
In addition to motorized height adjustment, the mount offers manual adjustments for optimal viewing:
- Swivel: Manually swivel the TV up to 25 degrees left or right.
- Tilt: Manually adjust the tilt angle up to 3 degrees.
- Leveling: Manually adjust the TV level by up to 3 degrees.

Image 5.1: Manual adjustment capabilities for swivel, tilt, and leveling.
Video 5.2: Animated demonstration of the motorized movement and manual adjustments.
6. Maintenance
Regular maintenance ensures the longevity and smooth operation of your MOUNT-IT! MI-386 mount.
- Cleaning: Wipe the mount surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all screws and connections to ensure they are tight and secure.
- Moving Parts: Ensure the motorized components are free from obstructions. Do not lubricate the motor or internal mechanisms unless specifically instructed by the manufacturer.
- Remote Control: Replace batteries in the remote control as needed.
7. Troubleshooting
If you experience issues with your mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount does not move. | No power, remote control issues, obstruction. | Check power connection. Replace remote batteries. Ensure no objects are blocking the mount's movement. |
| TV is not centered or level. | Initial installation misalignment, manual adjustment needed. | Adjust the manual swivel and leveling features as described in Section 5.2. Re-check wall plate installation if necessary. |
| Mount makes unusual noises. | Obstruction, loose parts. | Check for any obstructions. Inspect all fasteners for tightness. If noise persists, discontinue use and contact customer support. |
| Remote control not responding. | Dead batteries, out of range, signal obstruction. | Replace remote batteries. Ensure you are within range and have a clear line of sight to the mount's receiver. |
8. Specifications
- Model: MI-386
- Brand: Mount-it!
- Mounting Type: Wall Mount
- Movement Type: Articulating, Motorized
- Material: Rubber (likely referring to components, main structure is metal)
- Color: Black
- Compatible Devices: Television
- VESA Compatibility: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm
- Maximum Weight Capacity: 77 lbs (35 kg)
- Height Adjustment Range: Up to 21.3 inches
- Pull Angle: 101 degrees total
- Manual Swivel Angle: Up to 25 degrees left or right
- Manual Tilt Angle: Up to 3 degrees
- Distance from Wall (Up Position): Minimum 5.7 inches
- Distance from Wall (Lowering): Maximum 19.1 inches
- Stud Spacing: 16 inches (for double studs)

Image 8.1: Key dimensions of the motorized TV wall mount.
9. Warranty and Support
For warranty information or technical support, please refer to the official Mount-it! website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Customer Support: For assistance, visit www.mount-it.com or refer to the contact information provided in your product packaging.