1. Introduction
The Frizzlife M3005 Replacement Filter Cartridge Set is designed to provide high-performance water filtration for your Frizzlife SK99 and SP99 series under-sink water filter systems. This set ensures the continuous supply of clean, great-tasting water by effectively reducing various contaminants while retaining beneficial minerals. This manual guides you through the proper installation and maintenance procedures to maximize the lifespan and efficiency of your filter cartridges.
2. Product Overview
The M3005 filter set offers superior water purification with a 0.5 micron accuracy, significantly higher than many standard filters. It is certified to reduce lead, chlorine, taste, odor, and particulates, ensuring your water is free from common impurities. The twist-in filter system facilitates quick and easy replacement without the need for complex tools, saving you time and effort. Frizzlife is committed to delivering a reliable and affordable water filtration service.
Image: Frizzlife M3005 Replacement Filter Cartridge Set for under-sink systems.
3. Compatibility
This M3005 Replacement Filter Cartridge Set is specifically designed for and compatible with the following Frizzlife under-sink water filter systems:
- FRIZZLIFE SK99
- FRIZZLIFE SK99 New
- FRIZZLIFE SP99
- FRIZZLIFE SP99 New
4. Filter Components and Service Life
The M3005 set includes multiple filter stages, each with a specific function and recommended service life:
Image: The Frizzlife M3005 4-Pack Filter Set, including M3001, M3002, and M3003 cartridges.
- Sediment Filter (M3001): Recommended to change every 3-6 months.
- 3-5 Micron CTO Filter (M3002): Recommended to change every 8-12 months.
- 0.5 Micron CTO Filter (M3003): Recommended to change every 12-18 months.
Note: Actual service life may vary depending on your local water quality and daily usage.
Image: Visual representation of the three filter stages (M3001, M3002, M3003) and their respective service life recommendations.
5. Filter Replacement Instructions
The Frizzlife system features a twist-in design for easy filter replacement. Follow these general steps:
- Turn off Water Supply: Locate the cold water supply valve under your sink and turn it off to prevent water flow to the filter system.
- Depressurize System: Open your filtered water faucet to release any remaining pressure in the system. Allow water to drain until it stops.
- Remove Old Filter: Use the housing wrench provided with your system (or by hand if loose enough) to twist the old filter cartridge counter-clockwise until it detaches from the filter head. Be prepared for a small amount of residual water to drip.
- Prepare New Filter: Remove the plastic wrapping from the new filter cartridge. Ensure the O-rings are properly seated.
- Install New Filter: Align the new filter cartridge with the filter head and twist it clockwise until it is securely in place. Do not overtighten.
- Turn on Water Supply: Slowly open the cold water supply valve under your sink. Check for any leaks around the new filter.
- Flush the System: Open your filtered water faucet and let the water run for 3-5 minutes to flush out any air bubbles and carbon fines. The water may appear cloudy initially, which is normal.
Video: An overview of the Frizzlife Under Sink Water Filter System (MK99 model) and its quick-change filter mechanism. This video demonstrates the ease of replacing filters by twisting them in and out.
6. Maintenance & Care
Regular maintenance is crucial for the optimal performance of your Frizzlife water filter system. Adhere to the recommended filter replacement schedule:
- Replace the Sediment Filter (M3001) every 3-6 months.
- Replace the 3-5 Micron CTO Filter (M3002) every 8-12 months.
- Replace the 0.5 Micron CTO Filter (M3003) every 12-18 months.
Always flush the system for 3-5 minutes after each filter replacement to ensure proper function and clear water.
7. Specifications
| Specification | Value |
|---|---|
| Material | Carbon Fiber |
| Product Dimensions | 2.8"D x 11.81"W x 10.59"H |
| Item Weight | 2.14 pounds (970 Grams) |
| External Testing Certification | ANSI, NSF |
| Product Benefits | Removes Lead, Chlorine, Fluoride, Heavy Metals, VOCs, Chloramine |
| Unit Count | 4 Count |
| Compatible Water Purifier Models | FRIZZLIFE SK99, FRIZZLIFE SK99 New, FRIZZLIFE SP99, FRIZZLIFE SP99 New |
| Item model number | M3005 |
8. Troubleshooting
If you encounter any issues with your Frizzlife M3005 filter set, consider the following:
- Low Water Flow: This often indicates a clogged filter. Check the recommended replacement schedule and replace any overdue filters. Ensure the water supply valve is fully open.
- Leaks: Turn off the water supply immediately. Check all connections to ensure they are tight and properly seated. Verify that the filter cartridges are twisted in correctly and the O-rings are not damaged or misplaced.
- Unusual Taste or Odor: If you notice an unusual taste or odor after replacement, flush the system for a longer period (e.g., 10-15 minutes). If the issue persists, the filter may be faulty or expired.
9. Warranty & Support
For warranty information, technical support, or to purchase additional replacement filters, please contact Frizzlife solutions directly. Refer to the product packaging or the official Frizzlife website for the most current contact details and support resources.
