Sunjoy Avanti Outdoor Portable Propane Heater User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Sunjoy Avanti Outdoor Portable Propane Heater. Please read this manual thoroughly before assembly or operation and retain it for future reference.

Figure 1: Sunjoy Avanti Outdoor Portable Propane Heater (Gray model)

2. Safety Information

Your safety and the safety of others are paramount. Always adhere to all local codes and ordinances when installing and operating this heater. Failure to follow these instructions could result in fire, explosion, property damage, personal injury, or death.

• Outdoor Use Only: This heater is designed exclusively for outdoor use. Do not operate indoors or in enclosed spaces.
• Proper Clearance: Maintain adequate clearance from combustible materials. Refer to the product labels for specific distances.
• Ventilation: Ensure proper ventilation during operation.
• Automatic Safety Shut-Off: The heater is equipped with an automatic safety tilt-over valve that shuts off the gas supply if the unit is accidentally tipped or knocked over.
• Secure Placement: For enhanced stability, utilize the included anchoring plates to secure the base to the ground or patio, especially in windy conditions.
• Propane Tank: Use only a standard 20-lb. propane gas cylinder (not included). Ensure the tank is securely fastened with the provided strap.

3. Product Features

• High Heat Output: Delivers 47,000 BTUs of heat, providing generous warmth for outdoor patios and gardens.
• Durable Construction: Features a rust-resistant powder-coated steel frame, designed for long-term outdoor use.
• Easy Ignition: Simple push-button igniter for quick and easy startup.
• Adjustable Heat: Variable-heat control knob allows adjustment between low and high heat settings.
• Portability: Built-in wheels facilitate easy movement and relocation of the heater.
• Safety Features: Includes an automatic safety tilt-over valve for enhanced user safety.

Figure 2: The Avanti heater provides warmth in an outdoor patio setting.

4. Assembly Instructions

Assembly typically takes 30-60 minutes. It is recommended to have a second person assist with certain steps, especially when handling larger components.

1. Unpack Components: Carefully remove all parts from the packaging. Ensure all protective plastic/tape is removed from reflective surfaces, especially the heat-shield at the top.
2. Base Assembly: Attach the support bars to the base. Ensure the base is stable.
3. Propane Tank Installation: Place the standard 20-lb. propane gas cylinder into the base. Connect the regulator hose to the tank valve and tighten securely. Use the provided strap to secure the tank.
4. Pole and Burner Assembly: Attach the main pole to the base, feeding the hose through. Secure the burner assembly to the top of the pole.
5. Heat Reflector Assembly: Assemble the multi-piece heat reflector and attach it to the top of the burner unit. Handle these pieces carefully to avoid bending or scratching.
6. Final Checks: Double-check all connections for tightness. Ensure the unit is upright and stable.

Figure 3: Internal structure showing propane hose connection.

Figure 4: Propane tank compartment with access door.

5. Operating Instructions

1. Gas Supply: Ensure the propane tank valve is fully open.
2. Ignition: Turn the control knob to the 'High' position and push it in. While holding the knob in, press the red igniter button repeatedly until the pilot flame ignites. Continue to hold the control knob in for 15-30 seconds after ignition to ensure the pilot stays lit.
3. Adjust Heat: Once the pilot is stable, release the control knob. You can then adjust the heat output by rotating the control knob between 'Low' and 'High' settings.
4. Shut Down: To turn off the heater, turn the control knob to the 'Off' position. Close the valve on the propane tank when the heater is not in use.

Figure 5: Control panel for ignition and heat adjustment.

Figure 6: Top heating element in operation.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your heater.

• Cleaning: Keep the exterior surfaces clean. Use a soft, damp cloth. Avoid abrasive cleaners.
• Storage: When not in use, especially during off-seasons, store the heater in a dry, protected area. Consider using a weather-resistant cover to protect it from the elements.
• Gas Line Inspection: Periodically check the gas hose and connections for any signs of wear, damage, or leaks.
• General Care: Please follow the user manual for specific care instructions.

Figure 7: Built-in wheels for easy portability.

7. Troubleshooting

• Heater Does Not Stay Lit: If the heater does not stay lit after releasing the variable control knob, try pressing the variable knob in and out several times until the flame remains stable. This can help clear any minor obstructions or ensure proper gas flow.
• Weak or Yellow Flame: A weak or yellow flame may indicate low gas pressure or a partially clogged burner. Ensure the propane tank is not empty and all connections are secure. If the issue persists, consult a qualified technician.
• Igniter Not Sparking: Check the igniter electrode for debris or damage. Ensure the igniter button is fully depressed.
• Unit Tipping Hazard: While the unit has a safety tilt-over valve, it is crucial to secure the base using the provided anchoring plates, especially when the propane tank is low, as this reduces overall stability.

Figure 8: The heater's tilt safety feature automatically shuts off the gas if tipped.

8. Specifications

9. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual and user guide provided by Sunjoy. These documents contain comprehensive details regarding product warranty, replacement parts, and customer service contacts.

• User Manual (PDF): Download Here
• User Guide (PDF): Download Here