Introduction
This manual provides essential instructions for the safe and effective use of your FREDORCH F09 Big Dildo Attachment. Please read this manual thoroughly before initial use and retain it for future reference.
Safety Information
- The attachment is made from safe materials. However, always inspect the product for any damage or defects before each use.
- Clean the attachment thoroughly before and after each use as per the maintenance instructions.
- This product is designed for adult use only.
- Discontinue use immediately if you experience any discomfort or irritation.
- Keep out of reach of children.
Setup
The FREDORCH F09 Big Dildo Attachment is designed for use with FREDORCH A2, F2, and F3 sex machines that feature a 3XLR interface.
- Ensure your FREDORCH sex machine is powered off and unplugged before attaching or detaching accessories.
- Align the 3XLR connector on the base of the F09 attachment with the 3XLR port on your compatible sex machine.
- Gently push the attachment into the port until it clicks securely into place. Ensure a firm connection.
- To detach, press the release button (if present on your machine's 3XLR port) and pull the attachment straight out.
Figure 1: Base of the F09 attachment showing the 3XLR connector for machine compatibility.
Operating Instructions
Once the F09 attachment is securely connected to your FREDORCH A2, F2, or F3 sex machine, refer to your machine's specific user manual for operating instructions. The attachment functions as an interchangeable accessory, and its operation is controlled by the machine itself.
Figure 2: The FREDORCH F09 Big Dildo Attachment ready for use with a compatible machine.
Maintenance
Cleaning
- Always clean the attachment thoroughly before and after each use.
- Wash with warm water and a mild, toy-safe soap.
- Rinse thoroughly to remove all soap residue.
- Pat dry with a lint-free cloth or allow to air dry completely before storage.
- Do not use harsh chemicals, alcohol-based cleaners, or abrasive materials, as these may damage the product material.
Storage
- Store the attachment in a clean, dry, and cool place, away from direct sunlight and extreme temperatures.
- Keep it separate from other toys made of different materials to prevent potential reactions or damage.
Troubleshooting
- Attachment does not fit the machine:
- Ensure your machine is a FREDORCH A2, F2, or F3 model and has a 3XLR interface. Verify the attachment's 3XLR connector is correctly aligned with the machine's port. Do not force the connection.
- Product dimensions seem different from description:
- Product dimensions are measured manually and may have slight variations due to measurement tools and environmental factors. These minor differences do not affect product functionality.
Specifications
| Feature | Detail |
|---|---|
| Model | F09 Big Dildo Attachment |
| Brand | FREDORCH |
| Interface | 3XLR |
| Compatible Machines | FREDORCH A2, F2, F3 |
| Length | Approximately 21 cm (8.27 inches) |
| Diameter | Approximately 4.1 - 5.1 cm (1.61 - 2.01 inches) |
| Weight | Approximately 285g (10.05 oz) |
| Material | Safe material (as per manufacturer) |
Figure 3: Detailed dimensions of the F09 attachment.
Warranty and Support
For any questions, concerns, or support regarding your FREDORCH F09 Big Dildo Attachment, please contact the seller directly through the platform where you made your purchase. Please note that specific warranty details may vary by retailer.
If you have a preference for a specified color (if applicable), please send a message to the seller.
Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.