Carrera Digital 132 Set GT Face Off Instruction Manual

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your Carrera Digital 132 Set GT Face Off slot car race track. Please read all instructions carefully before use to ensure safe and optimal performance.

Safety Information

DANGER!

• Not suitable for children under 36 months due to danger of suffocation from small parts that can be swallowed.
• Attention: Functional risk of pinching.
• This toy contains magnets or magnetic components. Magnets that attract each other or a metallic object in the human body can cause serious injury or death. Seek medical advice immediately if magnets are swallowed or inhaled.

What's in the Box

Your Carrera Digital 132 Set GT Face Off includes the following components:

• Slot Car Race Track Set components (various track sections, supports, barriers)
• 1x Porsche GT Team Porsche 911 RSR (No.911) slot car
• 1x Ford GT Race Car (No.66) slot car
• 2x Hand controllers
• Power supply unit
• Lap counters

Figure 1: The Carrera Digital 132 Set GT Face Off product box, showing the included track layout and two race cars.

Setup

Follow these steps to assemble your race track:

1. Unpack Components: Carefully remove all track sections, cars, controllers, and accessories from the packaging.
2. Assemble Track Sections: Connect the track pieces by aligning the connectors and pressing them firmly together. Ensure all connections are secure to maintain electrical continuity. The set allows for various track configurations.
3. Install Barriers and Supports: Attach any included track barriers and supports to the designated areas, especially on curves and elevated sections, to prevent cars from leaving the track.
4. Connect Power and Controllers: Connect the power supply unit to the track's power input section. Plug the hand controllers into the designated ports on the power input section.
5. Place Cars on Track: Carefully place the Porsche 911 RSR and Ford GT Race Car onto their respective lanes on the track. Ensure the guide pins on the underside of the cars are correctly seated in the track slots.

Figure 2: An example of an assembled Carrera Digital 132 race track layout, demonstrating how various track sections connect to form a complete circuit.

Figure 3: A detailed view of the Ford GT Race Car (No.66) slot car, featuring its design and scale details.

Figure 4: A detailed view of the Porsche 911 RSR (No.911) slot car, showcasing its intricate livery and authentic design.

Note: No official product setup videos from the seller were available for this specific model.

Operating Instructions

Once the track is fully assembled and powered, you can begin racing:

1. Power On: Ensure the power supply is plugged in and the track is receiving power.
2. Controller Use: Each driver uses a hand controller to regulate the speed of their car. Press the trigger to accelerate. The Digital 132 system allows for lane changing and overtaking.
3. Lap Counter: The track includes lap counters to keep track of each car's progress during a race. These counters automatically advance as a car completes a lap.
4. Speed Control: Adjust your speed carefully, especially on curves, to prevent cars from derailing. The Digital 132 system offers precise speed control.

Note: No official product operation videos from the seller were available for this specific model.

Maintenance

To ensure the longevity and optimal performance of your Carrera Digital 132 set, consider the following general maintenance tips:

• Clean Track: Regularly clean the track rails with a soft, dry cloth to remove dust and debris, which can affect electrical contact.
• Inspect Cars: Periodically check the guide pins, braids, and tires of the slot cars for wear and tear. Replace worn parts as necessary.
• Storage: When not in use, store the track and cars in a clean, dry place away from direct sunlight and extreme temperatures.

Note: Specific maintenance instructions for this model are not detailed in the provided product information.

Troubleshooting

If you encounter issues with your Carrera Digital 132 set, consider these general troubleshooting steps:

• No Power: Ensure the power supply is securely connected to both the track and a working electrical outlet. Check for any loose track connections.
• Car Not Moving: Verify that the car's guide pin and braids are correctly positioned in the track slot and making good contact with the rails. Check the controller connection.
• Intermittent Operation: This can often be caused by dirty track rails or worn car braids. Clean the track and inspect/replace braids if needed.
• Cars Derailing Frequently: Reduce car speed, especially on curves. Ensure track sections are flat and securely connected.

Note: Specific troubleshooting guides for this model are not detailed in the provided product information. For persistent issues, please contact Carrera customer support.

Specifications

• Product Dimensions: 28.46 x 24.65 x 7.72 inches
• Item Weight: 22.2 pounds
• Item Model Number: 20030012
• Manufacturer Recommended Age: 8 - 10 years
• Release Date: October 1, 2021
• Manufacturer: Carrera

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your product or visit the official Carrera website. Specific warranty details are not provided in this manual.