Genius SP-Q160

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Genius SP-Q160 Gray Speaker User Manual

Model: SP-Q160

Introduction

The Genius SP-Q160 Sound Box is designed to provide a powerful audio experience with a sleek design. This speaker system is compatible with various devices including desktops, laptops, televisions, smartphones, and MP3 players, utilizing a standard 3.5mm audio jack. The volume control is conveniently located on the back of the unit for easy adjustment.

What's in the Box

Genius SP-Q160 Speakers (Pair)
Quick Guide

Setup

Follow these steps to set up your Genius SP-Q160 speakers:

Placement: Position the two speakers on either side of your computer monitor or desired listening area. Ensure they are on a stable, flat surface.
Connect Audio Cable: Locate the 3.5mm audio jack cable extending from one of the speakers. Plug this cable into the audio output port (headphone jack) of your computer, laptop, TV, smartphone, or MP3 player.
Connect USB Power: Locate the USB cable extending from the same speaker. Plug this USB cable into an available USB port on your computer, laptop, or a USB power adapter (not included). The speakers draw power directly from the USB connection.
Power On: Once both cables are connected, the speakers will power on automatically.

Genius SP-Q160 speakers with USB and 3.5mm audio cables visible

Figure 1: Front view of the Genius SP-Q160 speakers, showing the speaker grilles and the attached USB and 3.5mm audio cables ready for connection.

Operating Instructions

Operating your Genius SP-Q160 speakers is straightforward:

Volume Control: The volume control knob is located on the back of the right speaker. Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it.
Audio Source: Ensure your audio source (computer, smartphone, etc.) is playing sound and its volume is also adjusted appropriately.
Compatibility: These speakers are designed for use with any device that has a standard 3.5mm audio output jack and a USB port for power.

Genius SP-Q160 speakers from an angled view, highlighting the compact design

Figure 2: Angled view of the Genius SP-Q160 speakers, illustrating their compact and sleek design suitable for desktop use.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your speakers:

Cleaning: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use liquid cleaners, aerosols, or abrasive solvents, as these may damage the surface or internal components.
Storage: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
Handling: Avoid dropping the speakers or subjecting them to strong impacts. Do not attempt to disassemble the speakers, as this will void the warranty.

Troubleshooting

If you encounter issues with your Genius SP-Q160 speakers, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No sound	USB power cable not connected or faulty. 3.5mm audio cable not connected or faulty. Speaker volume too low. Audio source volume too low or muted. Incorrect audio output selected on device.	Ensure USB cable is securely plugged into a working USB port. Try a different USB port. Ensure 3.5mm audio cable is fully inserted into the audio output jack of your device. Increase the volume using the knob on the back of the speaker. Increase the volume on your audio source device and check if it's muted. Verify that the correct audio output device (e.g., "Speakers" or "Headphones") is selected in your computer's sound settings.
Distorted or poor sound quality	Volume set too high on speakers or audio source. Loose audio cable connection. Interference from other electronic devices.	Reduce the volume on both the speakers and your audio source. Check and re-secure the 3.5mm audio cable connection. Move speakers away from other electronic devices that might cause interference.
Speakers not powering on	No power from USB port.	Ensure the USB port is active and providing power. Try connecting the USB cable to a different USB port or a USB wall adapter.

Specifications

Feature	Detail
Model Name	SP-Q160
Total Output Power	6W (3W x 2)
Driver Unit	2 inch
Frequency Response	150Hz - 20kHz
Signal-to-Noise Ratio	70 dB
Power Source	USB Plug (for Notebook or PC)
Volume Control	Yes (Rear-mounted)
Cable Length	1.2m (approx. 4ft)
Connectivity Technology	Auxiliary (3.5mm jack), USB (for power)
Compatible Devices	Computers, Laptops, Tablets, Smartphones, MP3 Players, Televisions
Product Dimensions (each speaker)	4.72"D x 3.94"W x 7.28"H
Item Weight	0.36 Kilograms (approx. 12.7 ounces)
Color	Gray

Warranty Information

The Genius SP-Q160 speakers come with a Limited Warranty. Please refer to the specific warranty terms provided with your purchase or contact Genius customer support for detailed information regarding coverage, duration, and claim procedures. Keep your purchase receipt as proof of purchase.

Customer Support

For further assistance, technical support, or warranty inquiries, please visit the official Genius website or contact their customer service department. Contact information can typically be found on the product packaging or the Genius official website.

Note: Product specifications and appearance are subject to change without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.