Jensen JWM60A Wallmount Stereo User Manual

Introduction

This manual provides comprehensive instructions for the operation and maintenance of your Jensen JWM60A Wallmount Stereo. This unit is designed to provide high-quality audio and video entertainment with features including AM/FM radio, DVD/CD playback, USB and AUX inputs, and App Ready Bluetooth connectivity. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the performance of your device.

Safety Information

IMPORTANT SAFETY NOTICE:

Before using the DVD player function, ensure that the "Transport/Shipping Screw" located at the rear of the unit has been removed. This screw protects the DVD player mechanism during transit but must be removed for proper disc loading and playback. If not removed, discs may load for a few seconds and then eject. Always read the entire Owner's Manual before installing the stereo.

Always operate the unit within its specified voltage (12 Volts). Avoid exposing the unit to extreme temperatures, moisture, or direct sunlight. Do not attempt to disassemble or modify the unit, as this may void the warranty and pose a safety risk. Ensure proper ventilation around the unit during operation.

Product Overview

Figure 1: Front panel of the Jensen JWM60A Wallmount Stereo, showing the display, control knob, and various buttons.

Front Panel Controls and Display:

• Display: Central digital display showing current mode (FM, AM, DISC, BT, USB, AUX), frequency (e.g., FM 87.5), track number, and other status indicators like LOUD, ABC, CH.
• Control Knob (ENTER): Large central rotary knob for volume control and menu navigation. Pressing the knob acts as an ENTER button.
• Power Button: Located top-left, used to turn the unit on or off.
• VIEW Button: Below Power, likely for changing display views or information.
• Brightness Controls (▲/▼ BRIGHT): Adjusts the display brightness.
• Preset Buttons (1-6): Used for storing and recalling radio station presets or direct track selection for disc playback.
  • 1 (Play/Pause): Play/Pause for media.
  • 2 (Rewind/Previous): Rewind or previous track.
  • 3 (Shuffle): Shuffle playback.
  • 4 (Repeat): Repeat playback.
  • 5 (Folder Up): Navigate up a folder.
  • 6 (Folder Down): Navigate down a folder.
• Skip/Seek Buttons (◄◄ / ►►): Used for skipping tracks or seeking radio stations.
• MENU Button: Accesses the main menu for settings.
• EJECT Button: Ejects discs from the DVD/CD slot.
• Source Buttons:
  • AM: Selects AM radio band.
  • FM: Selects FM radio band.
  • DISC: Selects DVD/CD playback.
  • BT (Bluetooth): Selects Bluetooth audio streaming.
  • USB: Selects USB media playback.
  • AUX: Selects Auxiliary input.
• USB Port: Located bottom-left, for connecting USB devices.
• AUX Input: Located bottom-right, for connecting external audio devices via 3.5mm jack.
• Zone Control Buttons (ZONE A, ZONE B, ZONE C): Controls audio output to different speaker zones.
• Clock/Alarm Controls:
  • HOUR: Adjusts hour for clock/alarm.
  • MINUTE: Adjusts minute for clock/alarm.
  • ALARM: Sets or activates alarm.
  • ON/OFF SET (Clock): Sets or turns on/off clock.
  • SLEEP: Activates sleep timer.
• Audio Controls:
  • ►II (Play/Pause): Play/Pause for media.
  • MUTE: Mutes audio output.
  • AUDIO: Accesses audio settings (e.g., bass, treble, balance).
  • LOUD: Activates loudness compensation for enhanced bass and treble at low volumes.
• SETTINGS Button: Accesses general system settings.
• AS/PS (Auto Store/Preset Scan) Button: Automatically scans and stores strong radio stations or scans through presets.

Setup

Initial Installation:

1. Remove Shipping Screw: Locate and remove the "Transport/Shipping Screw" from the rear of the unit. This is crucial for the DVD player to function correctly.
2. Mounting: Securely mount the JWM60A stereo in the desired wall or cabinet opening. Ensure adequate space for ventilation.
3. Wiring: Connect the power, ground, speaker, and antenna wires according to the wiring diagram provided in the full owner's manual. Pay close attention to polarity for speaker connections.
4. External Connections: Connect any external devices such as auxiliary audio sources or USB drives to the respective ports.
5. Power On: Once all connections are secure, connect the unit to a 12-volt power source. Press the POWER button to turn on the unit.

Clock Setting:

• Press the CLOCK ON/OFF SET button.
• Use the HOUR and MINUTE buttons to adjust the time.
• Press CLOCK ON/OFF SET again to confirm and exit.

Operating

Source Selection:

Press the corresponding source button (AM, FM, DISC, BT, USB, AUX) to switch between different audio/video sources.

Radio Operation (AM/FM):

• Press AM or FM to select the desired band.
• Use the ◄◄ or ►► buttons to seek for the next/previous strong station.
• To manually tune, press and hold ◄◄ or ►► until the frequency starts changing, then release.
• Storing Presets: Tune to the desired station, then press and hold one of the numbered preset buttons (1-6) until the display confirms storage.
• Recalling Presets: Briefly press a numbered preset button (1-6) to recall a stored station.
• Auto Store/Preset Scan (AS/PS): Press AS/PS to automatically scan and store the strongest stations or to briefly play each stored preset.

Disc Playback (DVD/CD):

• Insert a disc into the disc slot. The unit will automatically switch to DISC mode and begin playback.
• Press ►II to pause/resume playback.
• Use ◄◄ or ►► to skip tracks/chapters.
• Press EJECT to remove the disc.
• Supported formats include CD, CD-R, CD-RW, DVD, DVD RW, DVD-RW, MP3, DVD-Video, MPEG-4, VCD, JPEG, CD-DA, WMA.

USB Playback:

• Insert a USB flash drive into the USB port. The unit will switch to USB mode.
• Use ◄◄ or ►► to navigate tracks.
• Use preset buttons 5 and 6 for folder navigation.

Bluetooth Operation:

• Press the BT button to select Bluetooth mode.
• On your Bluetooth-enabled device (smartphone, tablet), search for available devices and select "JWM60A".
• Once paired, you can stream audio from your device to the stereo.
• Use the ►II, ◄◄, and ►► buttons on the stereo to control playback.

Auxiliary Input:

• Connect an external audio device (e.g., MP3 player) to the AUX input jack using a 3.5mm audio cable.
• Press the AUX button to select the auxiliary input source.
• Control playback from the connected external device.

Audio Settings:

• Press the AUDIO button to cycle through audio settings such as Bass, Treble, Balance, and Fader. Use the control knob to adjust values.
• Press LOUD to toggle the loudness feature, which enhances bass and treble at lower volumes.
• Press MUTE to temporarily silence the audio output. Press again to unmute.

Zone Control:

• Use the ZONE A, ZONE B, and ZONE C buttons to control which speaker zones are active. This allows for independent audio control in different areas.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the unit's exterior. For stubborn marks, dampen the cloth slightly with water. Do not use harsh chemicals or abrasive cleaners.
• Disc Care: Handle discs by their edges. Keep them clean and free of scratches. Use a soft, lint-free cloth to wipe discs from the center outwards.
• Ventilation: Ensure that the ventilation openings on the unit are not blocked to prevent overheating.
• Power Disconnection: If the unit will not be used for an extended period, it is advisable to disconnect it from the power source.

Troubleshooting

Specifications

• Brand: Jensen
• Model: JWM60A
• Item Weight: 4.79 pounds
• Product Dimensions: 11.25 x 8.5 x 8.5 inches
• Voltage: 12 Volts
• Connectivity Technology: Auxiliary, Bluetooth, USB
• Controller Type: iOS or Android (App Control)
• Compatible Devices: Smartphone, Speaker
• Connector Type: 3.5mm Jack, USB
• Audio Output Mode: Stereo
• Surround Sound Channel Configuration: 5.1
• Video Encoding: MPEG-2
• Color: Black
• Supported Media: CD, CD-R, CD-RW, DVD, DVD RW, DVD-RW, MP3, DVD-Video, MPEG-4, VCD, JPEG, CD-DA, WMA, Dolby

Warranty and Support

This Jensen JWM60A unit is a renewed product. Amazon Renewed products are professionally inspected and tested to work and look like new. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.

For further assistance or technical support, please refer to the official Jensen support channels or the Amazon Renewed customer service.