1. Product Overview
The INTERPHONE LEDLIGHTMOUNTBMWGS is an additional mounting kit specifically designed for installing LED spot lights on BMW GS motorcycle models, including the R1200GS LC STD and R1250GS LC STD. This kit allows for straightforward installation of the LEDlight10spot (sold separately) using existing motorcycle fixing points, requiring no modifications to the bike's structure. It is engineered for durability while maintaining a lightweight profile.
This mounting kit provides a secure and stable platform for auxiliary LED lighting, enhancing visibility and safety during motorcycle operation.
Image 1.1: Components of the INTERPHONE LED Light Mounting Kit. This image shows the various parts included in the kit for mounting LED lights.
2. Setup and Installation
This section provides general guidelines for installing the LED light mounting kit. For detailed, model-specific instructions, please refer to your motorcycle's service manual or consult a qualified technician.
- Preparation: Ensure the motorcycle is turned off and cooled down. Gather all necessary tools, which typically include wrenches, Allen keys, and possibly a torque wrench.
- Identify Mounting Points: The kit is designed to utilize existing fixing points on your BMW R1200GS LC STD or R1250GS LC STD. Locate these points, usually near the front forks or frame.
- Attach Brackets: Secure the mounting brackets from the kit to the identified fixing points. Use the provided hardware and tighten fasteners according to your motorcycle's specifications. Do not overtighten.
- Mount LED Lights: Once the brackets are firmly in place, attach your LEDlight10spot (or compatible LED lights) to the mounting kit. Ensure the lights are oriented correctly for optimal illumination.
- Wiring (if applicable): If your LED lights require electrical connection, route the wiring safely, away from moving parts and heat sources. Connect to the motorcycle's electrical system as per the LED light manufacturer's instructions.
- Final Check: Verify that all components are securely fastened and that the lights are stable. Test the lights to ensure proper function.
Image 2.1: Example of LED lights installed on a motorcycle using a mounting kit. This image illustrates the typical appearance of auxiliary LED lights once mounted.
3. Operating Instructions
The INTERPHONE LEDLIGHTMOUNTBMWGS is a passive mounting kit. Its operation is directly tied to the functionality of the LED lights it supports. Once installed, ensure the LED lights are correctly wired and switched on according to their specific operating instructions. The mounting kit itself requires no direct user interaction beyond initial installation.
4. Maintenance
Regular maintenance ensures the longevity and safety of your mounting kit.
- Periodic Inspection: Regularly check all fasteners for tightness. Vibrations from motorcycle operation can cause bolts to loosen over time.
- Cleaning: Clean the mounting kit components with a damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the finish.
- Corrosion Check: Inspect the brackets for any signs of corrosion or wear, especially if riding in harsh weather conditions.
- Damage Assessment: In case of an impact or fall, inspect the mounting kit for any bends, cracks, or damage. Replace damaged components immediately to ensure safe operation.
5. Troubleshooting
This section addresses common issues related to the mounting kit. For issues with the LED lights themselves, refer to their specific manual.
- Loose Lights/Brackets: If the LED lights or mounting brackets feel loose, re-tighten all fasteners. Ensure they are torqued to the motorcycle manufacturer's specifications if available, or to a firm, secure level without overtightening.
- Vibration: Excessive vibration of the lights may indicate loose mounting. Re-check all connection points. Ensure the lights are properly seated in the kit.
- Difficulty Installing: If you encounter difficulty during installation, double-check that the kit is compatible with your specific BMW GS model (R1200GS LC STD or R1250GS LC STD). Ensure you are using the correct existing fixing points. Do not force components.
6. Specifications
| Brand | INTERPHONE |
| Model Number | LEDLIGHTMOUNTBMWGS |
| Color | Black |
| Specific Uses | Front Headlights (Mounting) |
| Vehicle Service Type | Motorcycle |
| Compatible Vehicle Type | Motorcycle (BMW R1200GS LC STD, R1250GS LC STD) |
| Special Feature | Dust Resistant |
| Auto Part Positioning | Front |
| Lens Material | Plastic |
| Item Dimensions (L x W x H) | 13 x 10 x 2 cm |
| Assembly Required | No (Refers to the kit itself, not the installation process) |
| Manufacturer | CellularLine S.p.A. |
| Country of Origin | Italy |
| Components Included | Product (Mounting Kit) |
7. Warranty Information
The INTERPHONE LEDLIGHTMOUNTBMWGS mounting kit comes with a manufacturer's warranty of 2 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation provided with your product or contact INTERPHONE customer support.
8. Support and Contact
For further assistance, technical support, or inquiries regarding the INTERPHONE LEDLIGHTMOUNTBMWGS mounting kit, please contact INTERPHONE customer service. You can typically find contact information on the official INTERPHONE website or through your retailer.
Online Resources: Visit the official INTERPHONE website for product updates, FAQs, and additional support materials. INTERPHONE Brand Store
