WEILY Tri-Fold LED Makeup Mirror SC6 User Manual

1. Introduction

This manual provides instructions for the setup, operation, and maintenance of your WEILY Tri-Fold LED Makeup Mirror, Model SC6. This mirror features 21 LED lights, 1x, 2x, and 3x magnification panels, a touch-sensitive power switch with dimming function, and dual power supply options (USB or batteries).

2. Safety Information

WARNING: This product contains glass that can break if not handled with care. Always adjust the mirror with caution to avoid injury. Keep out of reach of children and pets.

• Do not expose the mirror to direct sunlight or extreme heat.
• Avoid dropping the mirror, as this may cause damage to the glass or internal components.
• Do not immerse the mirror in water or other liquids.
• Use only the specified power sources (4 AAA batteries or a 5V USB power adapter).
• Keep the mirror clean and free from dust to ensure optimal performance of the LED lights and mirror surface.

3. Package Contents

Please check the package for the following items:

• WEILY Tri-Fold LED Makeup Mirror (Model SC6)
• Detachable Base
• USB Power Cable
• User Manual

Note: 4 AAA batteries and a 5V USB charging adapter are not included.

4. Setup Instructions

4.1 Assembly

1. Carefully remove all components from the packaging.
2. Align the mirror stand with the slot on the detachable base.
3. Press firmly until the stand clicks securely into place.

4.2 Power Supply

Your WEILY LED Makeup Mirror can be powered by either 4 AAA batteries or a USB cable. The mirror itself does not store power.

Image: Rear view of the mirror, highlighting the battery compartment and Micro USB port for power input.

Image: Diagram illustrating the location of the rear ON/OFF switch and the front touch screen switch for LED lights.

Using Batteries:

1. Locate the battery compartment on the back of the main mirror panel.
2. Open the battery compartment cover.
3. Insert 4 new AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Using USB Power:

1. Connect the small end of the provided USB cable to the Micro USB port on the back of the mirror.
2. Connect the larger end of the USB cable to a 5V USB power source (e.g., USB wall adapter, power bank, laptop USB port).

5. Operating Instructions

5.1 Powering On/Off the Mirror

1. Locate the master ON/OFF switch on the back of the main mirror panel.
2. Flip the switch to the 'ON' position to enable the mirror's functions.
3. To turn off completely, flip the switch to the 'OFF' position.

5.2 Using the LED Lights

1. Ensure the rear master switch is in the 'ON' position.
2. Touch the circular sensor switch located at the bottom center of the main mirror panel to turn the LED lights on.
3. To adjust the brightness, press and hold the touch sensor switch. The lights will gradually dim or brighten. Release when the desired brightness is achieved.
4. Touch the sensor switch again to turn the LED lights off.

Image: The WEILY Tri-Fold LED Makeup Mirror with its 21 LED lights illuminated, showcasing the touch sensor switch.

5.3 Magnification Panels

The mirror features three panels:

• Center Panel: 1x magnification for general viewing.
• Left Panel: 1x magnification for general viewing.
• Right Panel: Divided into 2x and 3x magnification sections for detailed tasks.

Utilize the 2x and 3x magnification panels for precise applications such as eyeliner, mascara, eyebrow shaping, or contact lens insertion.

Image: A detailed view of the mirror's panels, clearly labeling the 1x, 2x, and 3x magnification areas for various cosmetic applications.

5.4 Adjusting the Viewing Angle

The mirror is designed with a 180-degree rotating bracket, allowing you to adjust the viewing angle for optimal comfort and visibility. Gently tilt the mirror forward or backward to find your preferred position.

Image: A diagram illustrating the 180-degree rotational capability of the mirror on its stand, allowing for flexible viewing angles.

5.5 Tri-Fold Design

The tri-fold design allows you to close the side panels, protecting the mirror surfaces from dust and scratches when not in use. This also makes the mirror compact for storage or travel.

6. Maintenance

6.1 Cleaning

• To clean the mirror surfaces, gently wipe with a soft, lint-free cloth.
• For stubborn smudges, dampen the cloth slightly with water or a mild glass cleaner. Avoid abrasive cleaners.
• Wipe the plastic frame with a soft, dry cloth.

6.2 Storage

• When not in use, fold the side panels inward to protect the mirror surfaces.
• Store the mirror in a cool, dry place away from direct sunlight and excessive humidity.
• If storing for an extended period, remove the AAA batteries to prevent leakage.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WEILY website. Please retain your proof of purchase for any warranty claims.