1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CLOUDY BAY 6-inch 3CCT Dimmable LED Recessed Light. This ultra-thin LED downlight features selectable color temperatures (3000K, 4000K, 5000K), dimmable functionality (10%-100%), a high CRI 90+ rating, and is suitable for damp locations. It is designed for easy installation in retrofit, remodel, or new construction projects without the need for traditional junction boxes or cans.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Read all instructions carefully before installation.
- Ensure the power supply is turned off before beginning any work.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards.
- If you are not familiar with proper electrical wiring connections, consult a qualified electrician.
- Do not install in areas with direct water exposure unless specified. This product is rated for damp locations.
- Do not attempt to modify the fixture.
3. Package Contents
Verify that all components are present before installation:
- LED Recessed Lights (12 units)
- Junction Boxes (12 units)
- Cutting Template
- Installation Instruction Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Brand | CLOUDY BAY |
| Model Number | LJD006WH3C |
| Size | 6 Inch |
| Color Temperature | 3000K / 4000K / 5000K Selectable |
| Wattage | 15 Watts |
| Brightness | 950 Lumens |
| CRI | 90+ |
| Dimmable | 10%-100% (compatible with most LED dimmers) |
| Voltage | 120 Volts |
| Lifespan | 25,000 hours |
| Material | Metal |
| Installation Type | Recessed, Canless |
| Location Rating | Damp Location |
| Certifications | ETL listed, Type IC, Air Tight |
| Item Dimensions (L x W x H) | 6.69"L x 6.69"W x 1"H |
| Item Weight | 11.2 pounds (for 12-pack) |
5. Setup and Installation
The CLOUDY BAY recessed light is designed for easy installation in various ceiling types. No traditional recessed cans are required.
5.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Determine the desired location for each light fixture. Ensure there is sufficient clearance above the ceiling for the junction box and fixture.
- Use the provided cutting template to mark the ceiling for the hole. The recommended cut hole size is 6-1/4 inches.
5.2 Wiring the Junction Box
- Open the junction box cover.
- Remove the appropriate knockout(s) for your electrical wiring.
- Connect the electrical wires from the ceiling to the wires in the junction box using the provided wire connectors:
- Connect the black (live) wire from the ceiling to the black wire in the junction box.
- Connect the white (neutral) wire from the ceiling to the white wire in the junction box.
- Connect the green or bare copper (ground) wire from the ceiling to the green wire in the junction box.
- Ensure all connections are secure. Close the junction box cover.
5.3 Installing the Light Fixture
- Connect the cable from the light fixture to the junction box. Ensure the connection is firm.
- Before inserting the fixture, select your desired color temperature (3000K, 4000K, or 5000K) using the CCT toggle switch located on the side of the junction box. (Refer to Section 6.1 for details).
- Gently push the spring clips on the sides of the light fixture upwards.
- Insert the light fixture into the ceiling hole. The spring clips will automatically secure the fixture in place.
- Ensure the fixture is flush with the ceiling surface.
Image: Diagram showing the dimensions of the 6-inch recessed light and its junction box, including the recommended 6-1/4 inch cut hole size.
Image: Close-up of the CCT toggle switch on the junction box, illustrating the 3000K (Warm White), 4000K (Cool White), and 5000K (Day Light) options.
Video: An official product video demonstrating the features and installation process of the Cloudy Bay 3 Color LED Recessed Light, including the junction box connection and direct connector.
6. Operating Instructions
6.1 Color Temperature Selection (CCT)
Your CLOUDY BAY recessed light offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Day Light). To change the color temperature, locate the toggle switch on the side of the junction box. Adjust the switch to your desired setting before installing the fixture into the ceiling.
Image: Close-up of the CCT toggle switch on the junction box, illustrating the 3000K (Warm White), 4000K (Cool White), and 5000K (Day Light) options, along with examples of each color temperature in different room settings.
6.2 Dimming Functionality
The CLOUDY BAY recessed light is dimmable from 10% to 100% brightness. It is compatible with most LED dimmers. For optimal performance, especially if you require a wide dimming range, an ELV (Electronic Low Voltage) dimmer is highly recommended.
Image: Visual representation of the smooth dimming capability, showing a range from 10% to 100% brightness, and examples of compatible dimmer switches.
6.3 Compatible Dimmer List
For best dimming performance, refer to the following list of tested compatible dimmers. While the fixture works with most LED dimmers, using one from this list can ensure optimal results.
Image: A table listing various dimmer brands and models, their descriptions (Incandescent/CFL/LED), dimming ranges, and performance notes (Excellent/Good).
Note: If using Lutron-Caseta PD-6WCL-XX, consult Lutron or purchase a Lutron-LUT-MLC dimmer. This dimmer list is based on tests with a 6-pack of lights.
7. Maintenance
The CLOUDY BAY LED Recessed Light is designed for long-lasting, maintenance-free operation. The integrated LED chips are not replaceable.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- No Bulb Replacement: This fixture uses integrated LED technology, meaning there are no bulbs to replace.
8. Troubleshooting
If you experience issues with your CLOUDY BAY LED Recessed Light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty fixture | Check circuit breaker; Verify all wire connections are secure; Contact customer support if issue persists. |
| Light flickers or dims inconsistently | Incompatible dimmer; Loose wiring; Overloaded circuit | Ensure dimmer is LED compatible (ELV recommended); Check wiring connections; Reduce load on circuit or consult an electrician. |
| Incorrect color temperature | CCT switch set incorrectly | Turn off power, remove fixture, and adjust the CCT toggle switch on the junction box to the desired setting. |
9. Warranty & Support
9.1 Warranty Information
CLOUDY BAY provides a 3-year warranty for this product. This warranty covers defects in materials and workmanship under normal use and service for a period of three years from the date of purchase. The rated lifespan of the LED is 25,000 hours (average 3-5 hours/day).
If the product fails within the warranty period, CLOUDY BAY will provide a replacement or repair at its discretion. This warranty does not cover damage caused by improper installation, accident, abuse, misuse, or acts of nature.
9.2 Customer Support
For warranty claims, technical assistance, or any questions regarding your CLOUDY BAY LED Recessed Light, please contact our customer support team. We are committed to providing easy and fast replacements and support.
Please refer to the contact information provided on the product packaging or the official CLOUDY BAY website for the most up-to-date support details.
