Vastar Industrial Endoscope Inspection Camera User Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation of your Vastar Industrial Endoscope Inspection Camera. Please read this manual thoroughly before use and retain it for future reference. This device is designed for non-destructive inspection in hard-to-reach areas, offering clear visual feedback on its integrated display.

2. Product Overview

2.1 Components

• Main Endoscope Unit with 4.3-inch LCD Screen
• Flexible Camera Probe (5m/16.4ft) with 6 Adjustable LED Lights
• USB Charging Cable
• Accessory Kit (Hook, Magnet, Mirror)
• User Manual

2.2 Key Features

• Display: 4.3-inch Full-Color IPS HD LCD Screen
• Resolution: Supports 1920x1080P for images and videos
• Camera Diameter: 5.5mm ultra-thin lens
• Waterproof Rating: IP67 for camera probe and lens
• Lighting: 6 adjustable LED lights on the camera probe
• Battery: 3000mAh rechargeable battery, providing 5-7 hours of working time
• Cable: Rigid yet flexible cable for easy maneuverability
• Storage: Supports Micro SD card (not included) for photo and video recording
• Durability: Silicone design for anti-collision and drop resistance

Figure 1: Vastar Industrial Endoscope main unit, flexible probe, and included accessories.

Figure 2: Detailed specifications of the endoscope's cable, lens, resolution, and waterproof rating.

3. Setup

3.1 Charging the Device

Before first use, fully charge the endoscope unit using the provided USB charging cable. Connect the micro USB end to the device's charging port (usually at the bottom) and the USB-A end to a compatible power adapter (not included).

3.2 Inserting Micro SD Card

To save photos and videos, a Micro SD card (FAT32 format, not included) is required. Locate the Micro SD card slot on the side of the device and insert the card until it clicks into place. Ensure the device is powered off before inserting or removing the card.

3.3 Attaching Accessories

The endoscope comes with a hook, magnet, and mirror attachment. These can be screwed onto the tip of the camera probe for specific tasks, such as retrieving dropped items or viewing at an angle.

Figure 3: Included accessories: hook, magnet, and mirror, which attach to the camera probe.

4. Operating Instructions

4.1 Powering On/Off

Press and hold the power button (usually located on the side or front panel) for a few seconds to turn the device on. The LCD screen will illuminate. To power off, press and hold the power button again.

4.2 Basic Operation

Once powered on, the camera feed will display on the 4.3-inch LCD screen. Use the navigation buttons (up, down, left, right, OK) to interact with the menu and settings.

4.3 Taking Photos and Recording Videos

• Take a Photo: Short press the photo key (usually indicated by a camera icon).
• Record Video: Long press the photo key to start recording. Long press again to stop recording.

All captured media will be saved to the inserted Micro SD card.

4.4 Adjusting LED Lights

The camera probe features 6 adjustable LED lights. Use the scroll wheel or dedicated buttons on the side of the main unit to increase or decrease the brightness of these lights. This helps illuminate dark inspection areas.

4.5 Language and Resolution Settings

Access the device's menu to adjust various settings, including:

• Resolution: Select desired image/video resolution (e.g., 1920x1080, 1280x720, 640x480).
• Language: Choose your preferred language for the interface.
• Brightness: Adjust screen brightness.
• Rotate: Rotate the image on the screen.
• Format: Format the Micro SD card.
• Time Setting: Set the date and time.

Figure 4: Examples of practical applications for the Vastar Industrial Endoscope, such as inspecting plumbing, HVAC systems, and automotive components.

5. Maintenance

• Cleaning the Lens: Use a soft, dry cloth to gently clean the camera lens. For stubborn dirt, a slightly damp cloth can be used, ensuring no liquid enters the main unit.
• Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in use for extended periods.
• Storage: Store the endoscope in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the camera probe is coiled neatly to prevent damage.
• Waterproof Probe: While the camera probe is IP67 waterproof, the main unit is not. Avoid submerging the main unit in water.

6. Troubleshooting

• No Power: Ensure the device is fully charged. Check the USB charging cable and adapter.
• Blurry Image: The optimal focal area is 1.5 cm to 5 cm from the object. Adjust the distance. Ensure the lens is clean. Adjust LED brightness to avoid overexposure.
• Cannot Save Photos/Videos: Ensure a Micro SD card is inserted and formatted correctly (FAT32). Check for sufficient storage space.
• Screen Pixelation: The screen resolution is 480*272P, while the camera can capture higher resolutions. Adjust camera resolution in settings for optimal viewing or recording.
• LED Lights Not Working: Check the brightness adjustment wheel/buttons.

7. Specifications

8. Warranty & Support

For warranty information and customer support, please refer to the documentation included with your product or contact Vastar customer service directly. Keep your purchase receipt for warranty claims.