Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not disassemble, repair, or modify the unit.
- Keep the unit away from water or excessive moisture.
- Do not block the air intake or outlet vents.
- Use only the specified power source (USB 5V).
- Avoid placing the unit in direct sunlight or near heat sources.
- Keep out of reach of children.
- If the unit emits smoke, unusual odors, or makes abnormal sounds, immediately disconnect the power and contact customer support.
Package Contents
Verify that all the following items are included in your package:
- Sharp IG-MX15-B Plasmacluster Ion Generator Unit
- USB Power Cable
- Instruction Manual (this document)
Setup
Follow these steps to set up your Plasmacluster Ion Generator:
- Placement: Place the unit securely in a cup holder within your vehicle or on a stable, flat surface in another desired location. Ensure the air intake and outlet are not obstructed.
- Power Connection: Connect the provided USB power cable to the unit's USB port and then to a compatible USB power source (e.g., car USB port, USB adapter, or mobile battery).
Figure 1: USB connection for power supply. The device can be powered by various USB sources, including mobile batteries, for use in locations without traditional power outlets.
Figure 2: Optimal placement in a car cup holder. The device is designed to fit conveniently in vehicle interiors.
Operating Instructions
The Sharp IG-MX15-B Plasmacluster Ion Generator features simple controls for effective air purification.
- Power On/Off: Press the power button located on the top of the unit to turn it on or off.
- Mode Selection: The unit typically operates in an automatic mode for optimal performance. It may start with a "Turbo Plus" mode for rapid deodorization and then switch to a "Medium" mode for continuous maintenance.
Figure 3: Automatic operation sequence. The unit initiates with a 25-minute "Turbo Plus" mode for intensive deodorization, then shifts to a "Medium" mode to maintain a comfortable environment.
The Plasmacluster technology releases positive and negative ions into the air, which surround and break down airborne pollutants, odors, and allergens.
Figure 4: Plasmacluster NEXT technology. This advanced ion generation system enhances air purification and deodorization.
Features and Benefits
The Sharp IG-MX15-B Plasmacluster Ion Generator is designed to improve your environment through several key functions:
Effective Deodorization
The unit actively works to neutralize various unpleasant odors, particularly those common in vehicle interiors, such as:
- Mold odor
- Sweat odor
- Body odor
- Food odors
- Tobacco smoke odor
- Pet odors
Figure 5: Comprehensive odor elimination. The device targets and reduces six common types of odors found in enclosed spaces like car cabins.
Pollen and Fine Dust Collection
Equipped with a pollen catch filter, the generator captures approximately 80% of pollen and fine dust particles (10µm or larger), contributing to a cleaner air environment.
Figure 6: Pollen and fine dust capture. The integrated filter helps to reduce airborne allergens and particulate matter.
Enhanced Driving Comfort
By maintaining a fresh and clean atmosphere, the Plasmacluster Ion Generator helps to reduce driving stress, allowing for easier concentration and a more relaxed driving experience.
Figure 7: Stress reduction during driving. The improved air quality contributes to a more focused and comfortable driving environment.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Plasmacluster Ion Generator.
Filter Cleaning
The pollen catch filter should be cleaned periodically. Refer to the detailed instructions in the full product manual for specific cleaning procedures and frequency. Generally, gently remove any accumulated dust or debris from the filter using a soft brush or vacuum cleaner.
Ion Generating Unit Replacement
The ion generating unit has a limited lifespan. When its performance diminishes, it may need to be replaced. Consult the full product manual or Sharp customer support for information on replacement parts and procedures.
Troubleshooting
If you encounter any issues with your Sharp IG-MX15-B, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply or loose connection. | Ensure the USB cable is securely connected to both the unit and a working power source. Try a different USB port or adapter. |
| Weak airflow. | Air intake/outlet blocked or dirty filter. | Check for obstructions around the vents. Clean the pollen catch filter. |
| Unusual noise during operation. | Foreign object inside or unit not stable. | Ensure the unit is placed on a stable surface. If noise persists, discontinue use and contact support. |
| Deodorization effect seems low. | Dirty filter or large room size. | Clean the pollen catch filter. Ensure the unit is used in an appropriate sized area (e.g., car cabin). |
Specifications
Detailed technical specifications for the Sharp IG-MX15-B Plasmacluster Ion Generator:
| Brand | Sharp |
| Model Number | IG-MX15-B |
| Colour | Black |
| Product Dimensions (L x W x H) | 7.6 x 7.8 x 16.5 cm |
| Item Weight | 396 g |
| Noise Level | 33 Decibels |
| Special Features | Plasmacluster Ion Generator |
| Power Source | USB (Compatible with mobile batteries) |
| Control Method | Touch, On-Board |
| Filter Type | Ionizer, Pollen Catch Filter |
| Floor Area (Effective) | 33.17 Square Centimeters (suitable for car interiors) |
| Particle Retention Size | 10 Micron |
Figure 8: Product dimensions. The compact design allows for easy placement in various settings.
Warranty and Support
Sharp products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Sharp customer support:
- Website: Visit the official Sharp website for your region.
- Phone: Refer to your warranty card or the Sharp website for local contact numbers.
When contacting support, please have your model number (IG-MX15-B) and purchase date available.
