TechniSat DigitRadio 370 CD BT User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your TechniSat DigitRadio 370 CD BT. Please read this manual carefully before using the device to ensure proper functionality and to avoid damage.

Figure 1: Front view of the TechniSat DigitRadio 370 CD BT, showing the display, control knobs, and buttons.

Safety Information

Always observe the following safety precautions:

• Do not expose the device to rain or moisture.
• Do not open the casing. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the unit.
• Disconnect from power during lightning storms or when unused for long periods.

Package Contents

Verify that all items are present in the package:

• TechniSat DigitRadio 370 CD BT Unit
• Power Adapter
• Remote Control
• User Manual (this document)

Product Overview

Front Panel

Figure 2: Front panel layout showing the display, power button, mode button, info button, volume knob, tuning/enter knob, menu button, and preset buttons.

• Power Button: Turns the unit on/off.
• MODE Button: Switches between DAB+, FM, CD, Bluetooth, and AUX modes.
• INFO Button: Displays additional information on the screen.
• VOLUME Knob: Adjusts the audio output level.
• TUNING/ENTER Knob: Navigates menus and confirms selections.
• MENU Button: Accesses the main menu.
• PRESET Buttons: Stores and recalls favorite radio stations.
• 2.4" TFT Color Display: Shows station information, track details, and menu options.

Rear Panel

Figure 3: Rear panel layout showing the telescopic antenna, USB port, headphone jack, and AUX-IN port.

• Telescopic Antenna: For optimal radio reception.
• USB Port: For USB playback and charging external devices.
• Headphone Jack: For private listening.
• AUX-IN Port: For connecting external audio sources.

Setup

1. Unpacking: Carefully remove the unit and all accessories from the packaging.
2. Antenna Setup: Extend the telescopic antenna fully for best radio reception.
3. Power Connection: Connect the power adapter to the DC IN port on the rear of the unit and then plug it into a wall outlet.
4. Initial Power On: Press the Power button on the front panel or remote control to turn on the unit. The setup wizard will guide you through initial settings.
5. Language Selection: Select your preferred language using the TUNING/ENTER knob and press to confirm.
6. Time and Date: Set the correct time and date. This can often be synchronized automatically via DAB+ or FM signals.

Operating Instructions

DAB+ Radio Operation

The DigitRadio 370 CD BT supports DAB+ digital radio, offering a wide range of stations with clear digital sound.

Figure 4: The radio displaying a DAB+ station, highlighting its digital radio capabilities.

1. Select DAB+ Mode: Press the MODE button until "DAB+" is displayed.
2. Station Scan: The radio will automatically perform a scan for available DAB+ stations upon first use or when entering DAB+ mode.
3. Tune Stations: Use the TUNING/ENTER knob to scroll through the list of available stations. Press the knob to select a station.
4. Save Presets: To save a station, press and hold the PRESET button. Use the TUNING/ENTER knob to select a preset number, then press to confirm.
5. Recall Presets: Briefly press the PRESET button and use the TUNING/ENTER knob to select a saved station.

CD Player Operation

The integrated CD player supports standard audio CDs and MP3 CDs.

Figure 5: Close-up of the CD player slot, ready to accept a disc.

1. Insert CD: Gently insert a CD into the CD slot with the label side facing up. The unit will automatically detect the CD and begin playback.
2. Playback Controls: Use the play/pause, skip forward, and skip backward buttons on the front panel or remote control to manage playback.
3. Eject CD: Press the Eject button (if available, or typically a dedicated button on the remote or a long press of a play/pause button) to remove the CD.

Bluetooth Connectivity

Connect your smartphone or other Bluetooth-enabled devices for wireless audio streaming.

Figure 6: The included remote control alongside a smartphone demonstrating Bluetooth audio streaming capabilities.

1. Select Bluetooth Mode: Press the MODE button until "Bluetooth" is displayed. The unit will enter pairing mode.
2. Enable Bluetooth on Device: On your smartphone or device, enable Bluetooth and search for available devices.
3. Pairing: Select "DigitRadio 370 CD BT" from the list of devices. Once paired, the unit will confirm the connection.
4. Start Playback: Begin playing audio on your connected device. The sound will be streamed to the radio.

USB Playback and Charging

The USB port allows for playing audio files from a USB drive and charging compatible devices.

Figure 7: Illustration of USB playback, showing a USB drive connected to the radio's USB port.

• USB Playback: Insert a USB flash drive containing audio files (e.g., MP3) into the USB port on the rear panel. The unit will automatically switch to USB mode and begin playback. Use the navigation controls to browse and select files.
• USB Charging: Connect your smartphone or other USB-powered device to the USB port for charging. Note that charging speed may vary.

AUX-IN Connection

Connect external audio devices using a 3.5mm audio cable to the AUX-IN port.

1. Connect Cable: Plug one end of a 3.5mm audio cable into the AUX-IN port on the rear of the radio and the other end into the headphone jack or audio output of your external device.
2. Select AUX Mode: Press the MODE button until "AUX" is displayed.
3. Start Playback: Play audio on your external device. The sound will be routed through the radio's speakers.

Display and Sound Settings

Figure 8: A detailed view of the 2.4" TFT color display, showing clear text and icons.

• Display Brightness: Navigate to the System Settings menu to adjust the brightness of the 2.4" TFT color display.
• Equalizer (EQ): Access the Equalizer settings via the MENU button to customize the sound profile (e.g., Jazz, Rock, Classic, Pop, News, My EQ). The unit features 2 x 5 Watt RMS stereo sound.
• Sleep Timer: Set a sleep timer to automatically turn off the radio after a specified period.
• Alarm Clock: Configure alarm settings to wake up to your favorite radio station or a buzzer.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners or solvents.
• CD Player Care: Handle CDs by the edges to avoid fingerprints. If the CD player experiences reading issues, try cleaning the disc with a soft, lint-free cloth.
• Ventilation: Ensure that the ventilation openings on the unit are not blocked to prevent overheating.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official TechniSat website or contact your local dealer. Keep your proof of purchase for warranty claims.

Manufacturer: TechniSat

Date First Available: 4 May 2020