1. Introduction and Overview
This LED Light Kit has been custom made for the LEGO Land Rover Defender set 42110. It includes durable, easy-to-hide light strings to illuminate the headlights, tail lights, roof lights, and the detailed cabin of this authentic model. The kit is designed for a plug-and-play experience, offering both USB and 5V battery pack power options.
Please note: The LEGO Land Rover Defender set 42110 is NOT included with this light kit.
2. Safety Information
- Recommended for ages 12 and up.
- Keep small parts away from young children to prevent choking hazards.
- Do not expose the light kit to water or extreme temperatures.
- Ensure proper polarity when inserting batteries into the battery pack.
3. Package Contents
Your Brick Loot Deluxe LED Light Kit includes the following components:
- Assorted LED light strings with mini plugs
- USB power cable
- Battery pack (requires 3 AAA batteries, not included)
- Instruction tip sheet
4. Setup and Installation
Follow these general steps for installing your LED light kit. Refer to the included tip sheet for professional, easy-to-follow directions with photos specific to the LEGO Land Rover Defender 42110 set.
- Prepare Your LEGO Model: Ensure your LEGO Land Rover Defender 42110 set is fully assembled and ready for lighting integration. No special tools are required, and the installation is designed to avoid modifying your original LEGO set.
- Identify Lighting Points: The kit is designed to illuminate the headlights, tail lights, roof lights, and the detailed cabin. Strategically plan the routing of the light strings to ensure they are discreetly hidden within the model.
- Connect Light Strings: Carefully attach the LED light strings to the designated areas of your LEGO model. The light strings connect to the power source with mini plugs.
- Choose Power Source: You can power your light kit using either the provided USB plug or the 5V battery pack.
- USB Power: Connect the mini plugs from the light strings to the end of the USB wire. Insert the USB plug into any 1, 2, or 2.4 amp USB-powered 5V power supply or USB battery bank. A USB hub or switch can be used to expand the number of USB ports. Note: There is a maximum of 50 LEDs per 1 amp port.
- Battery Pack Power: Connect the mini plugs from the light strings to the battery pack. Install 3 AAA batteries (not included) into the battery pack, ensuring correct polarity.
- Secure Wiring: Route and secure all wires to prevent them from being pinched or visible, maintaining the aesthetic integrity of your LEGO model.
5. Operating Instructions
Once the light kit is fully installed and connected to your chosen power source, simply activate the power source (e.g., turn on the USB power bank or battery pack) to illuminate your LEGO Land Rover Defender 42110 model.
6. Maintenance
- Keep the light strings and connectors clean and free from dust.
- Avoid excessive bending or sharp folds in the wires to prevent internal damage.
- Store the kit in a dry, cool place when not in use.
- If using a battery pack, remove batteries during long periods of inactivity to prevent leakage.
7. Troubleshooting
- Lights Not Working:
- Check all mini plug connections to ensure they are securely seated.
- If using USB power, verify the USB power supply or bank is active and providing power.
- If using a battery pack, ensure 3 AAA batteries are correctly inserted and are not depleted.
- Flickering Lights:
- Inspect connections for looseness.
- If using USB, try a different USB port or power supply.
- If using a battery pack, replace batteries.
- Dim Lights:
- Ensure your USB power source provides sufficient amperage (1-2.4 amps recommended).
- If using a battery pack, replace batteries.
8. Specifications
| Product Dimensions | 8 x 3.25 x 1 inches |
| Item Weight | 1.3 ounces |
| Power Source | USB (5V, 1-2.4A) or 3x AAA Batteries (not included) |
| Max LEDs per 1 Amp Port | 50 LEDs |
| Manufacturer | Brick Loot |
| Model Number | LandRoverLED42110 |
| Recommended Age | 12 years and up |
9. Warranty and Support
For detailed warranty information, product support, or to inquire about replacement parts, please visit the official Brick Loot website or contact their customer service directly. Contact information can typically be found on the product packaging or the manufacturer's website.
10. Legal Disclaimer
Brick Loot is not associated with The LEGO Group. LEGO is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse our products.
