Jackson Audio Bloom v2 MIDI Dynamic Engine Guitar Pedal

Introduction

The Jackson Audio Bloom v2 MIDI is a versatile dynamic engine guitar pedal designed to manipulate the dynamics of your instrument. It integrates precisely tuned optical compression, equalization, boost, and sustain circuits. This pedal offers advanced MIDI control over its 6 compression settings, circuit activation (COMP, EQ, BLOOM), and bloom level, providing extensive tonal shaping capabilities for guitarists.

Setup

Follow these steps to properly set up your Bloom v2 MIDI pedal:

1. Power Connection: Connect a standard 9V DC power supply (center negative, 100mA minimum) to the 9V-DC input jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. Audio Input: Connect your guitar or the output of a preceding pedal to the INPUT jack using a standard 1/4-inch instrument cable.
3. Audio Output: Connect the OUTPUT jack to your amplifier's input or the next pedal in your signal chain using a standard 1/4-inch instrument cable.
4. MIDI Connection (Optional): For MIDI control, connect a TRS to MIDI cable to the MIDI input jack. Refer to the Operating section for detailed MIDI configuration.

Image: Rear panel of the Jackson Audio Bloom v2 MIDI pedal. This image displays the 9V-DC power input, MIDI input, 1/4-inch INPUT jack, and 1/4-inch OUTPUT jack. Three control knobs are visible at the top.

Image: Top-down view of the Jackson Audio Bloom v2 MIDI pedal. The pedal features a silver finish with multiple control knobs and footswitches for various functions.

Operating Instructions

The Bloom v2 MIDI pedal offers a range of dynamic effects. Familiarize yourself with its controls for optimal performance.

• Optical Compression: The pedal features an optical limiting circuit inspired by vintage designs. This provides transparent and subtle compression, capable of aggressive responses at higher settings or gentle sweetening for a "mastered" tone. The frequency response of the compressor is flat.
• Equalization (EQ): The Bloom v2 includes an equalization circuit to shape your tone. Adjust the dedicated EQ controls to boost or cut specific frequencies as needed.
• Boost and Sustain: Utilize the integrated boost and sustain circuits to enhance your signal and prolong notes. These can be activated independently or in conjunction with other effects.
• MIDI Control: The Bloom v2 MIDI allows external control over its functions.
  • Compression Settings: Control all 6 compression settings via MIDI.
  • Circuit ON/OFF: Toggle the COMP, EQ, and BLOOM circuits on or off using MIDI commands.
  • Bloom Level: Adjust the bloom level dynamically through MIDI.

  Note: A TRS to MIDI cable is required for MIDI functionality. Carefully read the dedicated MIDI section in the full manual for channel setup and command details, as configuration can be intricate.

Maintenance

Proper maintenance ensures the longevity and performance of your pedal.

• Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish and internal components.
• Storage: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
• Handling: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts, which can affect its delicate internal circuitry.

Troubleshooting

If you encounter issues with your Bloom v2 MIDI pedal, consult the following common problems and solutions:

• No Power/Pedal Does Not Turn On:
  • Ensure the 9V DC power supply is correctly connected and functioning.
  • Verify the power supply meets the 9V DC, center negative, 100mA minimum specification.
  • Test with a different compatible power supply if available.
• No Sound Output:
  • Check all audio cable connections (input and output) for secure fit.
  • Ensure your guitar and amplifier are working correctly by testing them independently.
  • Bypass the pedal (if applicable) to determine if the issue lies with the pedal or other equipment.
  • Verify that the pedal's volume or level controls are not set to minimum.
• Unexpected Noise or Hum:
  • Ensure you are using a regulated power supply. Unregulated power supplies can introduce noise.
  • Check for faulty cables.
  • Move the pedal away from other electronic devices that might cause interference.
• MIDI Control Issues:
  • Confirm you are using a proper TRS to MIDI cable.
  • Verify the MIDI channel settings on both the Bloom v2 MIDI and your MIDI controller. Incorrect channel settings are a common cause of issues.
  • Consult the detailed MIDI setup instructions in the comprehensive product manual for specific configuration steps.

Specifications

Warranty Information

The Jackson Audio Bloom v2 MIDI pedal comes with a Limited Lifetime Warranty. For detailed terms and conditions, please refer to the official Jackson Audio website or contact customer support.

Support

For further assistance, technical support, or inquiries regarding your Jackson Audio Bloom v2 MIDI pedal, please visit the official Jackson Audio website or contact their customer service department. Keep your purchase receipt and product serial number handy for any warranty claims or support requests.

Official Product Videos

No official product videos from the seller were found in the provided data. Please check the manufacturer's website for any available video demonstrations or tutorials.