1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and care of your new AEG VX82-1-4MB bagged vacuum cleaner. Please read these instructions carefully before using the appliance and retain them for future reference.
The AEG VX82-1-4MB is designed for effective and thorough cleaning, featuring SmartMode technology for automatic suction power adjustment and quiet operation at 57 dB(A). It is constructed with 55% recycled plastic, reflecting a commitment to sustainability.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. This appliance is intended for domestic use only.
- Do not use the vacuum cleaner to pick up water or other liquids.
- Do not vacuum flammable or combustible substances, hot ashes, or sharp objects.
- Ensure the power cord is not damaged and avoid running over it with the vacuum cleaner.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Unplug the appliance from the power outlet before cleaning or performing maintenance.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
3. Package Contents
Verify that all components are present in the packaging:
- 1 x AEG VX82-1-4MB Bagged Vacuum Cleaner
- 1 x Washable E12 Hygiene Filter (pre-installed)
- 1 x Dust Bag (pre-installed)
- 1 x Hard Floor Brush (Parquet Pro)
- 1 x 3-in-1 Multifunction Nozzle (attached to handle)
- 1 x User Manual (this document)
4. Setup
Follow these steps to assemble your vacuum cleaner before first use:
- Attach the Hose: Insert the hose end into the suction inlet on the main unit until it clicks securely into place.
- Connect the Telescopic Tube: Attach the telescopic tube to the hose handle. Extend the tube to a comfortable working length by pressing the release button and pulling.
- Attach the Floor Nozzle: Connect your desired floor nozzle (e.g., PowerClean or Hard Floor Brush) to the end of the telescopic tube. Ensure it is firmly attached.
- Check Dust Bag and Filter: Open the dust bag compartment and ensure an S-Bag and the E12 Hygiene Filter are correctly installed. Refer to Section 6 for details on checking and replacing these components.
- Connect to Power: Unwind the power cord and plug it into a suitable electrical outlet. The operating radius is 12 meters.
5. Operating Instructions
5.1 Power On/Off
Press the main power button located on the vacuum cleaner unit to turn the appliance on or off.
5.2 Adjusting Suction Power
The VX82-1-4MB offers flexible power control:
- Rotary Button: Use the central rotary button on the main unit to continuously adjust the suction power for different surfaces, from minimum (MIN) to maximum (MAX).
- SmartMode Technology: When activated, the vacuum cleaner automatically detects the floor type and adjusts the suction power accordingly, optimizing cleaning performance without manual intervention. This eliminates the need to change the floor nozzle for different surfaces.
5.3 Using Accessories
- OneGo PowerClean Nozzle: This primary nozzle is designed for efficient removal of both large and small particles in a single pass, suitable for various floor types.
- Hard Floor Brush (Parquet Pro): Use this brush for delicate hard floors like parquet. Its soft bristles and wheels protect sensitive surfaces.
- 3-in-1 Multifunction Nozzle: This versatile accessory is stored on the handle and can be configured for different tasks: a crevice tool for tight spaces, a dusting brush for delicate surfaces, and an upholstery tool for furniture.
5.4 Maneuverability and Reach
The vacuum cleaner features XL soft wheels for smooth movement and a 12-meter operating radius, allowing you to clean large areas without frequently changing power outlets.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
6.1 Changing the Dust Bag
The vacuum cleaner uses S-Bag Classic Long Performance dust bags with a capacity of 3.5 liters. A red LED indicator on the control panel will illuminate when the dust bag is full and needs replacement.
- Power Off and Unplug: Always turn off and unplug the vacuum cleaner before changing the dust bag.
- Open Compartment: Locate and open the dust bag compartment cover.
- Remove Full Bag: Carefully pull out the full S-Bag. The hygienic closing system ensures minimal contact with dust.
- Insert New Bag: Insert a new S-Bag, ensuring it is correctly seated in the holder.
- Close Compartment: Close the dust bag compartment cover securely.
6.2 Cleaning the Hygiene Filter
The E12 Hygiene Filter is washable. It is recommended to clean the filter regularly, or when suction power noticeably decreases.
- Power Off and Unplug: Turn off and unplug the vacuum cleaner.
- Access Filter: Locate the filter compartment, usually at the rear or side of the unit. Open the cover and remove the filter.
- Wash Filter: Rinse the filter under lukewarm running water. Do not use detergents. Gently squeeze out excess water.
- Dry Filter: Allow the filter to air dry completely for at least 24 hours before reinserting. Do not dry in direct sunlight or with heat.
- Reinstall Filter: Once completely dry, place the filter back into its compartment and close the cover securely.
6.3 Cleaning Nozzles and Accessories
Periodically check nozzles and accessories for blockages or accumulated debris. Remove any hair, threads, or large particles to maintain effective suction.
7. Troubleshooting
If you encounter issues with your vacuum cleaner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Not plugged in; power outlet fault; main switch off. | Check power cord connection; test outlet with another appliance; press power button. |
| Low suction power | Full dust bag; clogged filter; blocked hose/nozzle. | Replace dust bag; clean/replace filter; check and clear blockages. |
| Unusual noise | Blockage in hose/nozzle; foreign object in fan. | Turn off and unplug, then check for and remove blockages. |
| Dust escaping | Dust bag not installed correctly; filter missing/damaged; compartment cover not closed. | Reinstall dust bag; check/replace filter; ensure all covers are securely closed. |
If the problem persists after attempting these solutions, please contact AEG customer service.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | AEG |
| Model Number | VX82-1-4MB |
| Power | 600 Watts |
| Noise Level | 57 dB(A) |
| Dust Bag Capacity | 3.5 Litres (S-Bag) |
| Operating Radius | 12 meters |
| Filter Type | Washable E12 Hygiene Filter |
| Material | 55% Recycled Plastic |
| Dimensions (L x W x H) | 30 x 44.2 x 24.6 cm |
| Weight | 6.93 Kilograms |
| Special Features | SmartMode Technology, PowerClean Brush, XL Soft Wheels, 3-in-1 Accessory |
| Color | Misty Blue |
9. Warranty Information
Your AEG VX82-1-4MB vacuum cleaner comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official AEG website for detailed terms and conditions. Keep your proof of purchase for any warranty claims.
10. Support
For further assistance, spare parts, or service, please contact AEG customer support. You can find contact information on the official AEG website or through your local retailer.
Visit the official AEG store: AEG Brand Store
