BLACK+DECKER 40V MAX Blower/Vacuum (LSWV36 & LBX2040) Instruction Manual

Important Safety Information

Read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

• Eye Protection: Always wear eye protection that is marked to comply with ANSI Z87.1.
• Hearing Protection: Wear hearing protection during extended use.
• Appropriate Clothing: Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Electrical Safety: Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Battery Safety: Use only BLACK+DECKER 40V MAX batteries and chargers. Do not charge the battery in damp or wet locations. Do not incinerate the battery.
• Bystanders: Keep children and bystanders away while operating the tool.
• Intended Use: This product is designed for blowing and vacuuming dry leaves and light debris. It is not recommended for heavy, wet, or matted leaf cleanup.

Product Overview

The BLACK+DECKER 40V MAX Blower/Vacuum (LSWV36) is a versatile cordless tool designed for clearing debris from hard surfaces and collecting light yard waste. It operates on a 40V MAX Lithium-Ion battery (LBX2040) for extended runtime and consistent power.

Figure 1: BLACK+DECKER 40V MAX Blower/Vacuum (LSWV36) with battery (LBX2040).

Components Included:

• LSWV36 Blower/Vacuum Unit
• LBX2040 40V MAX Lithium-Ion Battery
• Battery Charger
• Blower Tube
• Vacuum Tube
• Collection Bag

Setup and Assembly

1. Charging the Battery

The 40V MAX Lithium-Ion battery (LBX2040) is shipped partially charged. Before first use, fully charge the battery. Lithium-ion batteries hold a charge up to 5 times longer than NiCad batteries and are always ready for use.

1. Plug the charger into a standard electrical outlet.
2. Slide the battery pack onto the charger. Ensure it is fully seated. The charging indicator light will illuminate.
3. Allow the battery to charge until the indicator light shows a full charge (refer to charger manual for specific light patterns).
4. Once charged, remove the battery from the charger.

Figure 2: Illustrative image of battery charging process.

2. Attaching the Blower Tube

1. Ensure the battery is removed from the unit.
2. Align the blower tube with the outlet on the front of the unit.
3. Push the tube firmly until it clicks into place.

3. Attaching the Vacuum Tube and Collection Bag

1. Ensure the battery is removed from the unit.
2. Remove the blower tube if attached.
3. Attach the vacuum tube to the main intake port.
4. Securely attach the collection bag to the discharge port. Ensure all connections are tight to prevent debris leakage.

Figure 3: Illustrative image of vacuum tube and collection bag assembly.

4. Installing the Battery

1. Align the battery pack with the battery port on the tool.
2. Slide the battery into the port until it locks securely in place.
3. To remove, press the battery release button and slide the battery out.

Operating Instructions

This lightweight unit weighs approximately 6.9 pounds in vacuum mode, making it easy to maneuver.

1. Blower Mode Operation

1. Ensure the blower tube is securely attached and the battery is installed.
2. Hold the unit firmly with both hands.
3. Press the ON/OFF switch to start the blower.
4. Direct the airflow to clear leaves and debris from desired areas.
5. Release the ON/OFF switch to stop the blower.

Figure 4: Illustrative image of operating the unit in blower mode.

2. Vacuum Mode Operation

Note: This product is optimized for light debris and dry leaves, and may not be suitable for heavy, wet, or matted leaf cleanup.

1. Ensure the vacuum tube and collection bag are securely attached and the battery is installed.
2. Hold the unit firmly with both hands.
3. Press the ON/OFF switch to start the vacuum.
4. Slowly sweep the vacuum tube over the debris to be collected.
5. Monitor the collection bag and empty it when full to maintain optimal suction.
6. Release the ON/OFF switch to stop the vacuum.

Figure 5: Illustrative image of operating the unit in vacuum mode.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool. Always remove the battery before performing any maintenance.

1. Cleaning the Unit

• Wipe the exterior of the unit with a damp cloth. Do not use strong detergents or solvents.
• Clear any debris from the air intake vents to prevent overheating.

2. Cleaning the Collection Bag

• Empty the collection bag frequently.
• For thorough cleaning, the bag can be rinsed with water and allowed to air dry completely before reattaching.

Figure 6: Illustrative image of emptying the collection bag.

3. Battery Care and Storage

• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not store batteries in a discharged state for extended periods. Charge them periodically.

Troubleshooting

If you encounter issues with your BLACK+DECKER Blower/Vacuum, refer to the following common problems and solutions:

Specifications

Warranty and Support

For detailed warranty information, please refer to the separate warranty card included with your product or visit the official BLACK+DECKER website. If you require technical assistance or have questions not covered in this manual, please contact BLACK+DECKER customer service.

Online Support: Visit www.blackanddecker.com

Customer Service: Refer to your product packaging or the BLACK+DECKER website for regional contact information.