SOLEIL Ceiling Lamp User Manual

Introduction

The Markslöjd SOLEIL Ceiling Lamp is a modern and eye-catching lighting fixture designed to be a centerpiece in any room. Featuring a unique design with gold-colored metal rods and 12 light sources, it provides a pleasant and atmospheric lighting experience. This manual provides essential information for the safe installation, operation, and maintenance of your SOLEIL lamp.

Important Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Always disconnect power at the main fuse box or circuit breaker before installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician in accordance with local electrical codes.
• Do not exceed the maximum wattage specified for the light bulbs (12 x 20W).
• Ensure the mounting surface can support the weight of the fixture (5.2 kg).
• Do not connect the fixture to a dimmer switch unless the bulbs used are dimmable and the dimmer is compatible.
• Avoid touching the bulbs directly with bare hands, as oils can shorten bulb life.
• Keep flammable materials away from the lamp.

Package Contents

Carefully unpack the fixture and check that all parts are present. If any parts are missing or damaged, do not attempt to assemble or install the lamp. Contact your retailer for assistance.

• SOLEIL Ceiling Lamp fixture (main body with metal rods and 12 E14 sockets)
• Mounting bracket/canopy
• Mounting hardware (screws, wall anchors)
• Instruction Manual (this document)
• Note: Light bulbs are NOT included.

Figure 1: SOLEIL Ceiling Lamp - Main Fixture

Setup and Installation

Professional installation by a qualified electrician is highly recommended for safety and proper functionality.

1. Prepare for Installation:
   • Turn off power at the main circuit breaker or fuse box to avoid electrical shock.
   • Ensure the area is clear and you have all necessary tools (screwdriver, wire strippers, ladder, etc.).
2. Attach Mounting Bracket:
   • Secure the mounting bracket to the ceiling junction box using the provided screws. Ensure it is firmly attached and can support the lamp's weight.
3. Make Electrical Connections:
   • Carefully connect the wires from the lamp to the corresponding wires from the ceiling:
     • Connect the live (usually black or brown) wire from the lamp to the live wire from the ceiling.
     • Connect the neutral (usually white or blue) wire from the lamp to the neutral wire from the ceiling.
     • Connect the ground (usually green/yellow or bare copper) wire from the lamp to the ground wire from the ceiling.
   • Secure all connections with wire nuts and ensure no bare wire is exposed.
4. Mount the Fixture:
   • Carefully lift the lamp fixture and align it with the mounting bracket. Secure the lamp to the bracket using the provided screws or fasteners.
   • Ensure the lamp is securely fastened and flush against the ceiling.
5. Install Light Bulbs:
   • Screw 12 E14 base light bulbs (max 20W each, LED recommended) into the lamp sockets. Do not overtighten.
6. Restore Power:
   • Turn the power back on at the main circuit breaker or fuse box.
   • Test the lamp to ensure it functions correctly.

Figure 2: SOLEIL Ceiling Lamp in a room setting

Operating Instructions

The SOLEIL Ceiling Lamp is designed for simple operation.

• Turning On/Off: The lamp is operated via a standard wall switch connected to the circuit. Flip the switch to turn the lamp on or off.
• Bulb Replacement:
  1. Ensure the lamp is turned off at the wall switch and, for added safety, disconnect power at the main circuit breaker.
  2. Allow bulbs to cool completely before touching them.
  3. Carefully unscrew the old E14 bulb.
  4. Screw in a new E14 bulb (max 20W, LED recommended).
  5. Restore power and test the lamp.

Maintenance and Care

Proper care will ensure the longevity and appearance of your SOLEIL lamp.

• Cleaning:
  • Always turn off the lamp and disconnect power before cleaning.
  • Wipe the metal surfaces with a soft, dry, lint-free cloth.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please contact your retailer or visit the official Markslöjd website. Keep your proof of purchase for any warranty claims.

For further assistance, please refer to the contact information provided with your purchase or on the manufacturer's official channels.