Introduction
This manual provides essential information for the care and enjoyment of your Hot Wheels '98 Subaru Impreza 22B STi-Version die-cast model car. This collectible miniature is part of the 2020 HW Turbo series, designed for enthusiasts and collectors.
Product Overview
The image displays the Hot Wheels '98 Subaru Impreza 22B STi-Version die-cast car, presented in its original blister packaging. The car itself is a detailed red replica of the Subaru Impreza 22B STi-Version, featuring gold-colored wheels. The packaging highlights "Hot Wheels" branding, "NEW FOR 2020", and indicates it is part of the "HW TURBO" series, numbered 23/250.
1. Setup
Unboxing and Initial Inspection
Your Hot Wheels model comes securely packaged. Carefully remove the car from its blister pack.
- Inspect the model for any visible damage or manufacturing defects.
- Ensure all wheels spin freely.
2. Operating
Display and Play
This die-cast model is designed for both display and light play.
- For display, place the car on a flat, stable surface away from direct sunlight or extreme temperatures.
- For play, gently roll the car on smooth surfaces. Avoid excessive force or dropping the model to prevent damage.
3. Maintenance
Care and Storage
Proper care will preserve the condition and value of your collectible.
- Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or solvents.
- Storage: Store the model in a cool, dry place. For long-term preservation, consider keeping it in its original packaging or a display case to protect it from dust and physical damage.
4. Troubleshooting
Common Issues
| Issue | Possible Cause | Solution |
|---|---|---|
| Wheels do not roll smoothly | Dust or debris in axle, bent axle | Gently clean around the wheels. If bent, avoid forcing and consider it a display piece. |
| Paint chips or scratches | Physical impact, rough handling | These are typically permanent. Handle with care to prevent further damage. |
5. Product Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 1.3 x 4.3 x 6.5 inches |
| Item Weight | 1.92 ounces |
| ASIN | B085BG2FDG |
| Manufacturer Recommended Age | 15 years and up |
| Manufacturer | Mattel |
6. Warranty and Customer Support
Hot Wheels products are manufactured by Mattel. For information regarding product quality or potential manufacturing defects, please refer to Mattel's official warranty policy or contact their customer support directly.
Note: As a collectible item, wear and tear from normal play or display are not typically covered under manufacturer warranty.
Manufacturer Website: Mattel Official Website
Hot Wheels Brand Store: Visit the Hot Wheels Store on Amazon
