Introduction
This instruction manual provides detailed guidance for assembling and interacting with the LEGO Jurassic World Indominus rex vs. Ankylosaurus (75941) building set. This set allows builders to recreate scenes from the Jurassic World movie, featuring two dinosaur figures, five minifigures, and a gyrosphere deployment station.
Image: The complete LEGO set, including the Indominus rex, Ankylosaurus, gyrosphere station, and minifigures.
What's in the Box
The LEGO Jurassic World Indominus rex vs. Ankylosaurus 75941 set contains 537 LEGO building elements. Key components include:
- Indominus rex dinosaur figure (posable)
- Ankylosaurus dinosaur figure (posable with swiping tail action)
- Gyrosphere deployment station with entrance turnstile and launch function
- Gyrosphere vehicle
- Five minifigures: Owen Grady, Claire Dearing, Gray Mitchell, Zach Mitchell, and one additional park worker.
- Buildable jungle scene with trees designed to be knocked over
- Step-by-step building instructions
Image: An overhead view of the various LEGO elements, including the dinosaurs, minifigures, and parts of the gyrosphere station, before assembly.
Assembly Instructions
Follow the included step-by-step building instructions carefully to assemble your LEGO Jurassic World set. Each step is illustrated to guide you through the construction of the Indominus rex, Ankylosaurus, gyrosphere deployment station, and jungle elements.
- Unpack all LEGO elements and sort them by color or type to facilitate the building process.
- Begin with the main structures as indicated in the instruction booklet, typically the gyrosphere station.
- Assemble the dinosaur figures and minifigures as shown.
- Connect all sub-assemblies to complete the full playset.
- Ensure all connections are secure to maintain structural integrity during play.
Video: An overview of the LEGO Jurassic World Indominus Rex vs. Ankylosaurus 75941 set, demonstrating its components and play potential.
Operating and Play Features
The LEGO Jurassic World Indominus rex vs. Ankylosaurus set offers several interactive play features:
- Gyrosphere Launch: Place a minifigure inside the gyrosphere. Position the gyrosphere at the deployment station. Use the trigger mechanism to launch the gyrosphere into action.
Image: A minifigure seated inside the gyrosphere, ready to be launched from the station.
- Ankylosaurus Tail Swipe: The Ankylosaurus figure features a movable tail. Manipulate the tail to simulate a swiping action, which can be used to knock over the buildable trees in the jungle scene.
Image: The Ankylosaurus figure with an arrow indicating the tail's swiping motion.
- Indominus rex Posing: The Indominus rex figure is posable, allowing for dynamic play scenarios and display. Adjust its limbs and jaw to create various action poses.
- Tree Knock-Over Feature: The jungle scene includes trees designed to be easily knocked over, enhancing the action play when dinosaurs interact with the environment.
Image: A hand demonstrating the tree knock-over feature, with an arrow showing the tree falling.
Maintenance
To ensure the longevity and cleanliness of your LEGO set, follow these maintenance guidelines:
- Cleaning: Clean LEGO bricks with a mild soap solution and lukewarm water. Use a soft brush or cloth for stubborn dirt. Rinse thoroughly with clear water and air dry at room temperature. Do not use hot water, harsh chemicals, or abrasive materials, as these can damage the plastic.
- Storage: Store your LEGO set in a cool, dry place away from direct sunlight to prevent discoloration and warping of plastic elements.
- Handling: Handle the assembled model with care to avoid accidental disassembly.
Troubleshooting
If you encounter any issues during assembly or play, consider the following:
- Missing Pieces: Double-check all packaging and sorting areas. If a piece is genuinely missing, contact LEGO Customer Service for assistance.
- Assembly Errors: Refer back to the instruction manual. Disassemble the problematic section and re-follow the steps carefully. Sometimes a small error early on can affect later steps.
- Loose Connections: Ensure that all bricks are firmly pressed together. LEGO elements are designed to fit snugly.
Specifications
| Brand | LEGO |
| Model Name | Indominus Rex vs. Ankylosaurus 75941 |
| Model Number | 75941 |
| Number of Pieces | 537 |
| Recommended Age | 8 years and up |
| Material Type | Acrylonitrile Butadiene Styrene |
| Item Dimensions (L x W x H) | 21.26 x 11.1 x 3.09 inches |
| Item Weight | 0.27 g |
| Theme | Movie (Jurassic World) |
| Subject Character | Dinosaur |
Video: A 360-degree view of the LEGO Jurassic World Indominus Rex vs. Ankylosaurus set, showcasing its design and features from all angles.
Safety Information
No specific safety information beyond general toy safety guidelines is provided for this product. Always ensure children play with LEGO sets under appropriate supervision, especially for younger users, due to small parts that may pose a choking hazard. This set is recommended for ages 8 and up.
Warranty and Support
For information regarding product warranty, missing parts, or further support, please visit the official LEGO customer service website or contact their support team directly. LEGO provides comprehensive support for their products.
Official LEGO Website: www.lego.com
