Skullcandy Stash Fuel Wireless Portable Charger

Introduction

This manual provides detailed instructions for the Skullcandy Stash Fuel Wireless Portable Charger, Model S7PWZ-M003. Please read this manual thoroughly before using your device to ensure proper operation, safety, and longevity. This portable charger offers a 10000mAh battery capacity with flexible charging options, including 10W wireless charging and multiple wired ports.

What's Included:

• Skullcandy Stash Fuel Power Bank
• USB-A to Dual Micro USB / USB-C Charging Cable

Product Overview

Familiarize yourself with the components and features of your Skullcandy Stash Fuel Portable Charger.

Front view of the Skullcandy Stash Fuel Portable Charger with digital display showing '100'. This image highlights the sleek design and the power percentage indicator.

Side view of the Skullcandy Stash Fuel Portable Charger, illustrating the location of the power button.

Detailed view of the Skullcandy Stash Fuel Portable Charger's input/output ports (USB-A, USB-C) and the included dual charging cable.

Key Features:

• 10000 mAh Battery: Provides extended power for your devices.
• 10W Wireless Charging: Conveniently charge Qi-compatible devices without cables.
• Multiple Output Ports: Includes two USB-A ports and one USB-C port for wired charging.
• Digital Power Display: Shows the remaining battery percentage.

Setup

Initial Charging of the Power Bank:

1. Connect the included USB-A to USB-C cable to the power bank's USB-C input port.
2. Connect the USB-A end of the cable to a compatible USB power adapter (not included) and plug it into a wall outlet.
3. The digital display on the power bank will illuminate and show the charging progress. Allow the power bank to fully charge before its first use.

Checking Battery Level:

To check the current battery percentage of the power bank, briefly press the power button located on the side of the device. The digital display will show the remaining charge level.

Operating Instructions

Wired Charging Your Devices:

1. Identify the appropriate charging cable for your device. You can use the included USB-A to Dual Micro USB / USB-C cable or your device's original cable.
2. Connect one end of the charging cable to one of the available USB-A output ports or the USB-C output port on the Skullcandy Stash Fuel Power Bank.
3. Connect the other end of the cable to your device. Charging will commence automatically.

Wireless Charging Your Devices:

1. Activate Wireless Charging: Press and hold the power button on the side of the power bank for approximately 2-3 seconds until a small blue LED indicator light on the top surface of the power bank illuminates. This indicates that the wireless charging function is active.
2. Place your Qi-compatible device (e.g., smartphone, wireless earbuds case) directly onto the wireless charging surface of the power bank. Ensure the device is centered over the charging coil for optimal contact.
3. The blue LED indicator light will remain lit, confirming that wireless charging is in progress. Your device should also indicate that it is charging.
4. Deactivate Wireless Charging: To turn off the wireless charging function, press and hold the power button again until the blue LED indicator light turns off. This conserves battery life when wireless charging is not in use.

Maintenance

Proper care and maintenance will extend the life of your portable charger.

• Keep the power bank dry and away from moisture. Avoid exposure to liquids.
• Do not expose the device to extreme temperatures (hot or cold).
• Clean the surface of the power bank with a soft, dry, lint-free cloth. Do not use abrasive cleaners or harsh chemicals.
• Store the power bank in a cool, dry place when not in use.
• Avoid dropping or subjecting the device to strong impacts.

Troubleshooting

If you encounter issues with your Skullcandy Stash Fuel Portable Charger, refer to the following common solutions:

Device Not Charging from Power Bank:

• Check Power Bank Battery: Ensure the power bank has sufficient charge. Press the power button to check the digital display.
• Verify Cable Connections: Make sure all charging cables are securely connected to both the power bank and your device.
• Wireless Charging Activation: If using wireless charging, confirm that the wireless charging function is activated. Press and hold the power button until the blue LED indicator light on top is illuminated. Ensure your device is Qi-compatible and correctly positioned on the charging surface.
• Try Different Ports/Cables: Attempt to charge your device using a different USB output port on the power bank or a different charging cable.

Power Bank Not Charging:

• Check Input Cable: Ensure the charging cable is securely connected to the power bank's USB-C input port and the power adapter.
• Verify Power Source: Try a different USB power adapter or a different wall outlet to rule out issues with the power source.

Specifications

Warranty and Support

The Skullcandy Stash Fuel Portable Charger includes a 1-year US warranty. This warranty covers manufacturing defects and ensures your product functions as intended under normal use.

For warranty claims, technical assistance, or any product-related inquiries, please contact Skullcandy customer service. Refer to the official Skullcandy website for the most current support contact information.