Weiser Brentwood/Belmont Brass Exterior Handleset User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Weiser Brentwood/Belmont Brass Exterior Handleset. This handleset is designed for exterior doors, offering both keyed entry and enhanced security. The polished brass finish provides a traditional aesthetic while ensuring robust functionality.

Figure 1: Complete Weiser Brentwood/Belmont Brass Exterior Handleset, showing the exterior handle, interior lever, and deadbolt components.

2. Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• Always wear appropriate personal protective equipment, such as safety glasses, during installation.
• Ensure all components are securely fastened before use.
• Do not use abrasive cleaners or solvents on the handleset finish, as this may cause damage. Use a soft, damp cloth for cleaning.
• Keep small parts out of reach of children to prevent choking hazards.

3. Package Contents

Verify that all items listed below are present in your package:

• Door Handle (Exterior)
• Lever (Interior)
• Deadbolt
• Latches
• Strikes
• Allen Wrench
• 2 Keys
• SmartKey Tool

4. Setup and Installation

The Weiser Brentwood/Belmont Handleset is designed for easy installation, typically requiring only a screwdriver. Follow these general steps for a successful setup:

1. Prepare the Door: Ensure your door is properly prepped with standard bore holes for a handleset. The adjustable latch accommodates all standard door operations.
2. Install the Latches: Insert the deadbolt latch and the spring latch into the door edge. Secure them with screws.
3. Install the Exterior Handleset: Position the exterior handleset assembly, including the deadbolt cylinder, through the door.
4. Install the Interior Components: Attach the interior lever and deadbolt turnpiece assembly, aligning them with the exterior components. Secure with mounting screws.
5. Install Strike Plates: Install the strike plates on the door frame, ensuring proper alignment with the latches.
6. Test Operation: Verify that both the deadbolt and the spring latch operate smoothly from both the interior and exterior.

Figure 2: The handleset is ANSI/BHMA Grade 3 Certified, indicating a high standard of residential security and durability.

SmartKey Re-keying Instructions

The SmartKey technology allows you to re-key your lock yourself in seconds, providing enhanced security and convenience. This feature protects against advanced break-in techniques and makes lost or unreturned keys obsolete.

1. Insert your functioning key into the cylinder and turn it 90 degrees clockwise.
2. Insert the SmartKey tool fully and firmly into the SmartKey hole. Remove the SmartKey tool.
3. Remove your functioning key.
4. Insert your new key fully and slowly turn it 180 degrees counter-clockwise.
5. Your lock is now re-keyed. Test the new key from both sides of the door to ensure proper operation.

Figure 3: SmartKey Security features, highlighting protection against kick-ins, bumps, picks, drills, and saws, and the re-keying process.

5. Operating the Handleset

The Weiser Brentwood/Belmont Handleset provides secure entry and exit for your exterior door.

• Locking from the Exterior: Insert the key into the deadbolt cylinder and turn to engage the deadbolt. The handleset can also be locked by turning the key.
• Unlocking from the Exterior: Insert the key into the deadbolt cylinder and turn to retract the deadbolt. The handleset can be unlocked by turning the key.
• Locking from the Interior: Turn the thumb-turn on the interior deadbolt to engage the deadbolt.
• Unlocking from the Interior: Turn the thumb-turn on the interior deadbolt to retract the deadbolt. The interior lever always allows for free exit.

6. Maintenance

To ensure the longevity and appearance of your Weiser handleset, follow these maintenance guidelines:

• Cleaning: Clean the handleset regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the brass finish.
• Lubrication: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and internal mechanisms to ensure smooth operation. Do not use oil-based lubricants.
• Inspection: Periodically check all screws and fasteners to ensure they are tight. Loose components can affect the security and functionality of the handleset.

7. Troubleshooting

If you encounter issues with your handleset, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Weiser customer support.

8. Specifications

9. Warranty and Support

Warranty: The Weiser Brentwood/Belmont Brass Exterior Handleset comes with a Lifetime Limited Warranty. Please refer to the official Weiser website or contact customer support for full details regarding warranty coverage and terms.

Customer Support: For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Weiser customer support through their official website or the contact information provided with your product packaging.

You can visit the official Weiser store for more information: Weiser Store on Amazon.ca