NERTHUS FIH 605

NERTHUS FIH 605 Insulated Bottle User Manual

Model: FIH 605

1. Introduction

Thank you for choosing the NERTHUS FIH 605 Double-Wall Insulated Bottle. This manual provides important information on the proper use, care, and maintenance of your new insulated bottle. Please read it thoroughly before first use and keep it for future reference.

NERTHUS FIH 605 Blue Insulated Bottle

Figure 1: The NERTHUS FIH 605 insulated bottle in blue, featuring its sleek design and secure cap.

2. Safety Information

  • Do not use in microwave ovens or conventional ovens.
  • Do not place in the freezer.
  • Keep out of reach of children when containing hot liquids.
  • Ensure the cap is securely tightened to prevent leaks, especially when transporting.
  • Avoid dropping the bottle, as this may damage the insulation properties.
  • Do not use abrasive cleaners or scrubbers that could scratch the surface or damage the finish.

3. Product Overview

The NERTHUS FIH 605 is a high-quality double-wall insulated bottle designed to maintain the temperature of your beverages for extended periods. It is constructed from durable 18/8 stainless steel, ensuring no transfer of odors or flavors from previous contents after proper cleaning.

Key Features:

  • Double-Wall Insulation: Keeps cold beverages chilled for up to 24 hours and hot beverages warm for up to 12 hours.
  • Airtight Screw Cap: Provides a secure, leak-proof seal.
  • BPA-Free: Made from safe, non-toxic materials.
  • Odor and Flavor Resistant: Stainless steel interior prevents lingering tastes or smells.
  • No Condensation: The double-wall design prevents external condensation, keeping surfaces dry.
Diagram showing BPA-free, double wall, and leak-proof features of Nerthus bottles.

Figure 2: Illustration highlighting the BPA-free, double-wall, and leak-proof characteristics of the bottle.

Cutaway diagram of Nerthus bottle showing airtight cap, double wall, stainless steel interior, and ergonomic base.

Figure 3: Detailed cutaway view illustrating the internal structure, including the airtight cap, double wall, non-toxic stainless steel interior, and ergonomic base.

4. Setup

  1. Unpack: Carefully remove the insulated bottle from its packaging.
  2. Initial Cleaning: Before first use, wash the bottle and cap thoroughly with warm, soapy water. Rinse well. Refer to the Maintenance section for detailed cleaning instructions.
  3. Prepare for Use: For best results with hot beverages, pre-heat the bottle by filling it with hot water for 5-10 minutes, then empty. For cold beverages, pre-chill with cold water or ice.

5. Operating Instructions

  1. Filling: Unscrew the cap and fill the bottle with your desired beverage. Do not overfill; leave some space at the top to allow for the cap.
  2. Sealing: Screw the cap back on tightly to ensure an airtight and leak-proof seal.
  3. Transport: The bottle's leak-proof design makes it suitable for transport in bags, backpacks, or car cup holders.
  4. Opening: To open, simply unscrew the cap.
Blue Nerthus insulated bottle standing upright in sand on a beach, with a pair of blue and black sneakers next to it.

Figure 4: The NERTHUS bottle is designed for portability, ideal for outdoor activities like a day at the beach.

6. Maintenance

Cleaning:

  • Hand Wash Only: This bottle is NOT dishwasher safe. Hand washing is required to preserve the insulation properties and exterior finish.
  • Daily Cleaning: After each use, rinse the bottle and cap with warm water. Use a bottle brush with mild dish soap to clean the interior thoroughly.
  • Deep Cleaning: For stubborn residues or odors, use a mixture of warm water and baking soda or vinegar. Let it sit for a few hours or overnight, then rinse thoroughly.
  • Drying: Allow the bottle and cap to air dry completely with the cap off to prevent moisture buildup and odors.

Storage:

Store the bottle with the cap off to ensure proper ventilation and prevent any lingering odors.

7. Troubleshooting

ProblemPossible CauseSolution
Bottle leaksCap not tightened properly; Seal/gasket is damaged or missing.Ensure cap is screwed on tightly. Check the silicone gasket inside the cap for proper placement and condition. Replace if damaged.
Beverage does not stay hot/coldBottle not pre-heated/pre-chilled; Damage to double-wall insulation.Pre-heat with hot water for hot drinks or pre-chill with cold water/ice for cold drinks. If insulation is compromised (e.g., due to dropping), the bottle may need replacement.
Unpleasant odor inside bottleImproper cleaning; Residue from previous contents.Perform a deep clean using baking soda or vinegar solution. Ensure bottle is completely dry before storage.

8. Specifications

FeatureDetail
Model NumberFIH 605
Capacity750 ml (This specific model, other capacities available)
Material18/8 Stainless Steel
Insulation TypeDouble-Wall Vacuum Insulation
Dimensions (L x W x H)8 x 8 x 31 cm
Weight400 grams
Care InstructionsHand wash only
BPA FreeYes
Diagram showing various Nerthus bottle sizes compared to an iPhone 6, including 350ml, 500ml, 750ml, and 1500ml bottles.

Figure 5: Size comparison chart for various NERTHUS bottle capacities, including the 750ml model.

9. Warranty and Support

For warranty information or technical support, please contact NERTHUS customer service through their official website or the retailer where the product was purchased. Please have your model number (FIH 605) and purchase details ready.

Visit the official NERTHUS store: NERTHUS Store

© 2024 NERTHUS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.