Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Do not connect to a dimmer switch.
- Do not look directly into the LED light source.
- Ensure all connections are secure and properly insulated.
- Operating temperature range: -20°C to 40°C (-4°F to 104°F).
Package Contents
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Mounting Hardware (screws, wire nuts)
- Instruction Manual
Product Features
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- High Brightness: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Motion Detection: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Adjustable Design: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Durable Construction: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Weatherproof: Waterproof rating ensures resilience against rain, sleet, or snow.
- ETL Certified: Meets safety and quality standards.
Image: Front view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Setup
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Prepare for Installation:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Ensure the mounting surface is stable and can support the fixture's weight.
- Mount the Fixture:
- Attach the mounting bracket to the junction box using the provided screws.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Adjust Light Heads and Sensor:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Restore Power: Turn the power back on at the circuit breaker.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Operating Instructions
The motion sensor has adjustable settings to customize its operation.
- TIME Setting: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Initial Power-On: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Maintenance
- Cleaning: Clean the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
- Inspection: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LEDs: The integrated LED bulbs are designed for long life and are not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Light stays on continuously. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Light flickers or dims. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| Motion sensor range is poor. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Specifications
| Model Number | SM-4000-180-2H |
| Brand | Amazon Basics |
| Wattage | 40W |
| Brightness | 4000 Lumens |
| Color Temperature | 5000K Daylight |
| Detection Angle | Up to 180° |
| Detection Range | Up to 49 feet |
| Voltage | 120 Volts |
| Material | Aluminum, Plastic |
| Water Resistance Level | Waterproof |
| Certifications | ETL Certified |
| Item Dimensions (L x W x H) | 14.96" x 6.3" x 5.12" |
| Item Weight | 1.9 Pounds |
Warranty and Support
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.