Vipack Billy Bedside Table User Manual

1. Introduction

Thank you for choosing the Vipack Billy Bedside Table. This manual provides essential information for the safe assembly, use, and maintenance of your new furniture. Please read it thoroughly before beginning assembly and keep it for future reference.

Image 1.1: The Vipack Billy Bedside Table in Terra Rose, featuring a Scandinavian style with a graphic pattern and golden legs.

2. Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fittings are securely tightened before use. Periodically check and re-tighten if necessary.
• Do not stand or climb on the bedside table.
• Keep small parts and packaging materials away from children to avoid choking hazards.
• If the product includes anti-tip hardware, it is crucial to install it to prevent serious injury from tipping furniture.
• Do not place hot items directly on the surface without protection.

3. Package Contents

Before assembly, verify that all components are present and undamaged. Refer to the included parts list (usually found in the packaging) to ensure you have everything required.

• Table panels (top, bottom, sides, back)
• Drawer components (front, back, sides, bottom)
• Legs with golden accents
• Drawer knobs
• Drawer slides/runners
• Assembly hardware (screws, dowels, cam locks, etc.)

If any parts are missing or damaged, please contact Vipack customer support.

4. Assembly Instructions

Assembly is required for this product. Follow these general steps, referring to the specific diagrams and instructions provided in your product's packaging for detailed guidance. A Phillips head screwdriver and a hammer (for dowels) are typically required.

1. Prepare the Workspace: Clear a spacious area and lay out all components on a soft, clean surface to prevent damage.
2. Assemble the Main Frame: Attach the side panels to the bottom panel using the provided hardware (e.g., dowels and cam locks). Ensure the back panel groove is correctly aligned.
3. Install Drawer Slides: Secure the drawer slides to the inner sides of the main frame according to the markings.
4. Assemble Drawers: Construct each drawer by attaching the front, back, and side panels. Slide the drawer bottom into the grooves. Attach the drawer slides to the assembled drawers.
5. Attach Legs: Securely fasten the legs to the underside of the bedside table.
6. Insert Drawers: Carefully slide the assembled drawers into the main frame, ensuring they glide smoothly.
7. Attach Knobs: Screw the golden knobs onto the drawer fronts.
8. Final Check: Verify that all connections are tight and the table is stable.

Image 4.1: Dimensional diagram of the Vipack Billy Bedside Table, illustrating key measurements and drawer mechanism.

5. Operating Instructions

The Vipack Billy Bedside Table is designed for general storage and display purposes in a bedroom setting.

• Drawer Use: Gently pull and push the drawers to open and close them. Avoid forcing the drawers, especially if they feel stiff.
• Weight Capacity: Do not overload the drawers or the top surface. Distribute weight evenly.
• Placement: Position the bedside table on a flat, stable surface.

6. Care and Maintenance

Proper care will help maintain the appearance and longevity of your bedside table.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish. Dry immediately with a clean cloth.
• Spills: Clean up spills immediately to prevent staining or damage to the wood.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Heat and Moisture: Protect the surface from extreme heat and moisture. Use coasters under drinks and protective pads under hot items.
• Hardware: Periodically check and tighten all screws and fittings to ensure stability.

7. Troubleshooting

8. Specifications

Feature	Detail
Model Name	Billy
Model Number	BINA2213
Brand	Vipack
Color	Terra Rose (Pink)
Dimensions (L x W x H)	43.2 x 40 x 45.2 cm (17.0 x 15.7 x 17.8 inches)
Weight	10 kg (22 lbs)
Material	COMBI_SOLID_PINE_MDF (Engineered Wood)
Number of Drawers	2
Assembly Required	Yes
Style	Scandinavian, Retro Modern, Trendy
Certifications	FSC® C120760 (The mark of responsible forestry)

9. Warranty and Support

Vipack products are manufactured to high-quality standards. For information regarding warranty coverage, spare parts availability, or technical support, please refer to the warranty card included with your purchase or visit the official Vipack website.

For customer service inquiries, please contact your retailer or Vipack directly through their official channels.