1. Introduction
The BEEPER Beretti Scolopax 4.0 is an advanced radio collar designed for hunting dogs, specifically optimized for woodcock hunting. This device features unique sound profiles, including a 'bell' sound that does not disturb wildlife, and is engineered for high audibility over long distances. Its robust construction ensures durability and resistance to environmental factors, making it a reliable tool for hunters.
The Scolopax 4.0 incorporates baritone sounds with a very low frequency and high volume, allowing sounds to propagate effectively through dense vegetation over greater distances compared to conventional beepers. It offers 32 distinct sounds for both search and point phases, including specialized sounds like the 'falcon' and 'mushroom' that are less likely to disturb woodcocks.
2. Package Contents
Please check the package to ensure all items are present:
- Beeper Scolopax 4.0 Unit
- Orange Collar
- Gold Seal/Gasket
- 3 x AA Batteries
- Screwdriver
- Magnetic Key
- Instruction Booklet
- Product Carrying Case
Image: The durable black carrying case provided with the Beeper Scolopax 4.0, designed for protection and transport.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the beeper unit. The unit features a secure, waterproof cap closure system.
- Using the provided screwdriver, carefully open the battery compartment.
- Insert the 3 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment securely with the cap and tighten with the screwdriver to maintain its waterproof seal.
Image: The Beeper Scolopax 4.0 unit with its battery compartment open, showing three AA batteries ready for installation. The unit is black with a red accent.
3.2 Attaching to Collar
Thread the orange collar through the designated loops on the beeper unit. Ensure the unit is securely fastened to the collar and positioned comfortably for your dog.
4. Operating Instructions
4.1 Power On/Off
The Beeper Scolopax 4.0 can be powered on or off using the provided magnetic key. Simply pass the magnetic key over the designated area on the beeper unit to activate or deactivate it. Alternatively, inserting the batteries will power on the device.
4.2 Sound Modes and Adjustments
The device offers 32 distinct sounds: 16 for the dog's search phase and 16 for when the dog is on point (stop). These include unique 'bell' and 'mushroom' sounds designed not to disturb game.
- Adjusting Pause Time: The pause time between sounds during the dog's search phase can be adjusted from 4 to 60 seconds. Use the internal settings (accessible with the screwdriver) to set your preferred interval.
- Silent Pointing Trigger: The beeper features a silent trigger for when the dog goes on point, ensuring minimal disturbance to the game.
- Delayed Sound on Point: An internal setting allows you to set a delay for the sound to activate once the dog is on point. This can be adjusted using the screwdriver.
Image: The Beeper Scolopax 4.0 unit shown alongside its remote control, illustrating the system's components for operation.
4.3 Battery Status Signal
Upon power-on, the device emits different sounds to indicate the current battery status, allowing you to monitor battery life effectively.
5. Maintenance
5.1 Cleaning
Regularly clean the beeper unit with a damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive materials that could damage the casing or seals.
5.2 Battery Replacement
When the battery status signal indicates low power, replace all three AA batteries simultaneously. Always use fresh, high-quality AA batteries for optimal performance and battery life.
5.3 Waterproof Seal
The beeper unit is designed with a waterproof cap closure. Ensure this cap is always securely fastened after battery changes or adjustments to maintain its water resistance. Periodically inspect the gold seal/gasket for any signs of wear or damage and replace if necessary.
6. Troubleshooting
- No Sound:
- Check if the unit is powered on using the magnetic key.
- Ensure batteries are correctly installed and not depleted.
- Weak Sound:
- Replace the AA batteries with new ones.
- Beeper Not Responding:
- Verify the magnetic key is functioning correctly.
- Check battery connections and ensure they are secure.
7. Specifications
| Feature | Specification |
|---|---|
| Model | Scolopax 4.0 |
| Brand | BEEPER |
| Manufacturer | Beretti |
| Dimensions (Beeper Unit) | Ø 6 x 9.5 cm |
| Power Source | 3 x AA Batteries |
| Number of Sounds | 32 (16 search, 16 point) |
| Adjustable Pause Time | 4 to 60 seconds (during search) |
| Water Resistance | Waterproof cap closure system |
| Collar Material | Leather |
| Product Weight | Not specified |
8. Warranty and Support
8.1 Warranty
The BEEPER Beretti Scolopax 4.0 comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
8.2 Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the contact information provided in your product packaging or on the official BEEPER website.
