Einhell TE-CD 18 Li E 18V Power X-Change Cordless Drill Driver

1. Safety Instructions

Always observe the following safety precautions when operating the Einhell TE-CD 18 Li E cordless drill driver to prevent electric shock, fire, and serious injury.

• Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Personal Safety: Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• Power Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

2. Product Overview

The Einhell TE-CD 18 Li E is a versatile 18-volt cordless drill driver designed for various drilling and driving tasks. It features a robust motor with high-grade metal gearing and is part of the Power X-Change battery system, allowing battery interchangeability with other Einhell tools.

Key Components and Features:

• 1/2 Inch Quick-Change Drill Chuck: For fast and easy accessory changes.
• Electronic Torque Preselector: Allows precise control over torque settings for different materials and applications.
• Two-Speed Gearing: Provides optimal power for screwdriving and high speed for drilling.
• Integrated LED Light: Illuminates the work area for improved visibility.
• Ergonomic Design with Softgrip: Ensures comfortable handling and a secure grip.
• Practical Belt Clip: For convenient carrying and accessibility.
• Automatic Spindle Lock: Facilitates easy tool changes.

3. Setup

3.1. Battery Installation and Removal

1. Ensure the battery is fully charged using a compatible Einhell Power X-Change charger (sold separately).
2. Align the battery pack with the base of the drill handle.
3. Slide the battery pack into the handle until it clicks securely into place.
4. To remove, press the release button on the battery pack and slide it out.

3.2. Bit Installation and Removal

1. Rotate the chuck counter-clockwise to open the jaws.
2. Insert the desired drill bit or screwdriver bit into the chuck. Ensure the bit is inserted as far as possible for a secure grip.
3. Rotate the chuck clockwise to tighten the jaws around the bit. Hand-tighten firmly. The automatic spindle lock assists in securing the bit.
4. To remove, rotate the chuck counter-clockwise to loosen the jaws and pull the bit out.

4. Operating Instructions

4.1. Selecting Speed and Torque

• Speed Selector: Use the switch on top of the drill to select between two speed settings. Position '1' provides lower speed and higher torque, ideal for screwdriving. Position '2' provides higher speed and lower torque, suitable for drilling.
• Torque Preselector: Rotate the adjustable collar behind the chuck to select the desired torque setting (1-21). Lower settings are for smaller screws or softer materials, while higher settings are for larger screws or harder materials. The drill mode setting (indicated by a drill bit icon) bypasses the clutch for maximum torque during drilling.

4.2. Drilling and Screwdriving

1. Select the appropriate speed and torque setting for your task.
2. Position the drill bit or screwdriver bit on the workpiece.
3. Press the trigger switch to start the drill. The speed is variable depending on how far the trigger is pressed.
4. Apply steady, even pressure. For drilling, allow the drill to do the work. For screwdriving, stop when the screw is flush or the clutch engages.
5. To reverse the rotation, push the forward/reverse switch (located above the trigger) to the opposite side.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Einhell TE-CD 18 Li E drill driver.

• Cleaning: Keep the ventilation slots clean to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.
• Chuck Maintenance: Periodically clean the chuck jaws to ensure proper gripping of bits.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store discharged batteries. Recharge them before storing for extended periods.
• General Inspection: Regularly check for any signs of wear, damage, or loose parts. If any issues are found, discontinue use and have the tool serviced by qualified personnel.

6. Troubleshooting

If you encounter issues with your Einhell TE-CD 18 Li E, refer to the following common troubleshooting steps:

• Drill not starting:
  • Check if the battery is properly inserted and fully charged.
  • Ensure the forward/reverse switch is not in the center (locked) position.
  • Inspect the battery terminals and tool contacts for dirt or damage.
• Loss of power/Reduced performance:
  • The battery may be low; recharge it.
  • The torque setting might be too low for the task. Adjust to a higher setting or switch to drill mode.
  • The drill bit may be dull or unsuitable for the material.
• Chuck not holding bit securely:
  • Ensure the chuck is tightened firmly.
  • Clean the chuck jaws and the bit shank to remove any debris.
  • Check for damage to the chuck jaws.
• Overheating:
  • Ensure ventilation slots are clear of obstructions.
  • Avoid continuous heavy-duty use. Allow the tool to cool down.
  • Reduce the load on the tool by using a sharper bit or lower pressure.

If problems persist, contact Einhell customer support or a qualified service technician.

7. Specifications

8. Official Product Videos

Watch these official videos from Einhell USA LLC for more information on the Power X-Change system and the TE-CD 18 Li E drill driver.

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Einhell website. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact Einhell customer service through their official website or the contact details provided in your product packaging.