Invicta P642354

Invicta Bassano 5 Pellet Stove User Manual

Model: P642354

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Invicta Bassano 5 Pellet Stove, model P642354. The Bassano 5 is a compact pellet stove designed for heating smaller spaces, offering efficient performance.

Invicta Bassano 5 Pellet Stove, front view

Front view of the Invicta Bassano 5 Pellet Stove, showcasing its compact design and black finish.

Please read this manual thoroughly before installing or operating the appliance. Keep it in a safe place for future reference.

2. Important Safety Instructions

Failure to follow these safety instructions could result in property damage, bodily injury, or even death. Always prioritize safety when installing, operating, or maintaining your pellet stove.

  • Professional Installation: Installation must be carried out by qualified personnel in accordance with local and national building and safety codes.
  • Ventilation: Ensure adequate ventilation in the room where the stove is installed to prevent carbon monoxide buildup.
  • Fuel Type: Only use approved wood pellets as fuel. Do not use other materials such as trash, cardboard, or liquid fuels.
  • Clearances: Maintain proper clearances from combustible materials as specified by local regulations and the stove's installation guide (refer to separate installation instructions if provided).
  • Hot Surfaces: The stove's surfaces become very hot during operation. Keep children, pets, and combustible materials away from the appliance. Use heat-resistant gloves when handling components.
  • Maintenance: Regular cleaning and maintenance are crucial for safe operation. Refer to the Maintenance section.
  • Power Supply: Ensure the stove is connected to a properly grounded electrical outlet. Do not overload circuits.

3. Setup and Initial Checks

Before initial operation, ensure the stove is correctly installed and all connections are secure.

3.1 External Thermostat Connection

The Bassano 5 pellet stove supports connection to an external room thermostat (not supplied). A dry contact thermostat can be connected to the electronic board of the appliance. This allows for more precise temperature control based on the ambient room temperature.

3.2 Top Flue Outlet

This model offers the possibility of connecting the flue pipe from the top of the appliance. This feature can be advantageous for space-saving installations.

4. Operating Instructions

This section details how to operate your Invicta Bassano 5 pellet stove, including programming and special functions.

4.1 Programming Options

The appliance features various programming modes to automate its operation:

  • Daily Program: The stove has 2 daily programs, allowing for 2 ignition and 2 shutdown cycles per day.
  • Weekly Program: The stove offers 4 weekly programs, enabling up to 4 ignition and 4 shutdown cycles per day throughout the entire week.
  • Weekend Program: Two specific programs are available for the weekend (Saturday, Sunday), allowing for 2 ignition and 2 shutdown cycles per day.

4.2 Hot Air Distribution Fan

The Bassano 5 is equipped with a tangential hot air distribution fan located at the front. This fan circulates warm air directly into the room, ensuring efficient heat distribution.

4.3 Stand-by Function

The stand-by function is an energy-saving feature that puts the appliance into a low-power state. The stove will shut down if the ambient room temperature exceeds the set temperature by 3°C for more than 60 seconds. It will automatically restart when the ambient temperature drops 1°C below the set temperature.

5. Maintenance

Regular maintenance is crucial for the longevity, efficiency, and safe operation of your pellet stove. Always ensure the stove is cool and disconnected from the power supply before performing any maintenance.

  • Ash Removal: Regularly remove ash from the burn pot and ash pan. Frequency depends on usage.
  • Cleaning: Clean the glass door, heat exchanger, and flue pipes as recommended by the manufacturer.
  • Professional Inspection: It is recommended to have the stove and chimney system inspected and cleaned by a qualified technician at least once a year.

6. Troubleshooting

This section provides solutions to common issues you might encounter. For problems not listed here, or if issues persist, contact qualified service personnel.

  • Stove Not Igniting: Check pellet hopper for fuel, ensure power supply is connected, and verify the burn pot is clean.
  • Poor Heat Output: Ensure proper pellet quality, check for blockages in the flue system, and clean the heat exchanger.
  • Excessive Smoke: This can indicate a blocked flue, poor draft, or incorrect pellet type. Immediately shut down the stove and investigate.
  • Unusual Noises: If you hear grinding or rattling, turn off the stove and inspect for loose parts or foreign objects.

7. Technical Specifications

Model Number P642354
Brand Invicta
Nominal Power 5 kW
Rated Power 4.2 kW
Heating Surface Area Up to 48 m²
Dimensions (L x W x H) 56 x 47 x 95 cm
Weight 83 kg
Color Black

8. Warranty and Customer Support

For information regarding the warranty period and terms for your Invicta Bassano 5 Pellet Stove, please refer to the warranty card included with your purchase or contact your retailer. For technical assistance, spare parts, or service, please contact your authorized Invicta dealer or customer support.

Note: Availability of spare parts information is not provided in the product details. Please inquire with your retailer or Invicta customer service.

Related Documents - P642354

Preview Invicta Watch Warranty and Service Guide
Comprehensive guide to Invicta watch warranties, including registration, service procedures, repair pricing, shipping requirements, and policies. Learn how to maintain your Invicta timepiece for optimal performance and longevity.
Preview Invicta L(z) Series Vibrators: Installation and Maintenance Manual
Official installation and maintenance manual for Invicta L(z) Series dust-protected rotary electric vibrators. Covers operational conditions, safety, technical specifications, and ATEX compliance for industrial use.
Preview Invicta Watch Manual and Warranty Guide
Explore the official Invicta watch manual and warranty details. This guide covers your 3-year limited warranty, service center information, watch care, and explanations of various watch features and movements.
Preview INVICTA SFI-80 Band Saw Operator's Manual
Comprehensive operator's manual for the INVICTA SFI-80 Band Saw, detailing operation, safety, maintenance, technical specifications, and replacement parts.
Preview Invicta VD53 Movement Caliber: User Manual and Functions
Detailed guide to the Invicta VD53 watch movement, covering its display elements, setting procedures, and stopwatch functions including standard, accumulated elapsed time, and split time measurements.
Preview Invicta Watch Manual & 3-Year Warranty Guide
Official manual and comprehensive 3-year warranty details for Invicta timepieces. Learn about watch care, servicing, operation, and troubleshooting for your Invicta watch.