Nightstick 9000-CHGR2 Drop-in Rapid Charger User Manual

Introduction

The Nightstick 9000-CHGR2 Drop-in Rapid Charger is designed for use with any of the Nightstick NSR-9000 Series flashlights. Constructed from a durable glass-filled nylon polymer, this charger securely holds the flashlight in place. It can be mounted to a wall or any solid surface, including inside a vehicle. The charger includes ports for AC, DC, and USB power cords, providing versatile charging options for your NSR-9000 Series lights.

Image: Nightstick 9000-CHGR2 Drop-in Rapid Charger, showing its compact black design with charging contacts.

Safety Information

Please read all safety instructions before using the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Use only with Nightstick NSR-9000 Series flashlights.
• Do not expose the charger to water or excessive moisture.
• Do not attempt to disassemble or modify the charger. Refer all servicing to qualified personnel.
• Ensure the power source matches the charger's voltage requirements.
• Keep out of reach of children.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Package Contents

The package for the 9000-CHGR2 Drop-in Rapid Charger includes:

• Nightstick 9000-CHGR2 Drop-in Charger
• V-Slot for 9000 Series Lights with the Key

Note: Power cords (AC, DC, or USB) are sold separately and are not included with the charger unit. Please ensure you have the appropriate power cord for your intended use.

Setup

The 9000-CHGR2 charger is designed for easy installation and use. It can be mounted on a wall or any solid surface, including within a vehicle, using appropriate fasteners (not included).

1. Mounting (Optional): If desired, secure the charger to a stable surface using screws through the designated mounting holes. Ensure the mounting location is free from obstructions and allows for easy access to the charging port.
2. Connect Power: Plug the appropriate power cord (AC, DC, or USB, sold separately) into the charging port located on the bottom of the 9000-CHGR2 charger. Connect the other end of the power cord to a compatible power source.
3. Ready for Use: The charger is now ready to receive an NSR-9000 Series flashlight for charging.

Operating Instructions

To charge your Nightstick NSR-9000 Series flashlight:

1. Ensure the 9000-CHGR2 charger is connected to a live power source.
2. Carefully align your NSR-9000 Series flashlight with the V-slot and charging contacts on the charger.
3. Gently push the flashlight down into the charger until it clicks securely into place. The charger is designed to hold the flashlight firmly.
4. Observe the charging indicator light (typically red) on the charger. A red light indicates that the flashlight is charging. The light will change color (e.g., to green) or turn off when charging is complete, depending on the specific flashlight model.
5. To remove the flashlight, simply pull it upwards from the charger.

Maintenance

To ensure optimal performance and longevity of your 9000-CHGR2 charger:

• Cleaning: Periodically wipe the charger with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Contacts: Ensure the charging contacts on both the charger and your flashlight are clean and free of corrosion.
• Storage: Store the charger in a cool, dry place when not in use.
• Inspection: Regularly inspect the charger and power cords for any signs of damage. Discontinue use if damage is observed.

Troubleshooting

Specifications

Warranty and Support

The Nightstick 9000-CHGR2 Drop-in Rapid Charger comes with a 2 Year Limited Warranty.

For technical support, warranty claims, or further inquiries, please contact Nightstick customer service or visit their official website. You can find more information and products at the Nightstick Store on Amazon.