Mimio Boxlight P9 WX36N Interactive Projector User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your Mimio Boxlight P9 WX36N Pen Interactive LCD Projector. Please read this manual thoroughly before using the projector and keep it for future reference.

The Mimio Boxlight P9 WX36N is a versatile and portable LCD projector designed for various presentation and interactive applications. It features high brightness, full HD resolution, and interactive pen capabilities to enhance your viewing and teaching experience.

2. Safety Information

Always observe the following safety precautions to prevent fire, electric shock, or injury.

• Do not block ventilation openings. Ensure adequate airflow around the projector.
• Do not expose the projector to rain or moisture.
• Do not open the projector casing. Refer all servicing to qualified service personnel.
• Avoid looking directly into the projector lens when the lamp is on, as the bright light can damage your eyes.
• Use only the power cord supplied with the projector or an approved replacement.
• Unplug the projector from the power outlet before cleaning or when not in use for extended periods.

3. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer immediately.

• Mimio Boxlight P9 WX36N Projector
• Power Cord
• Remote Control (with batteries)
• Interactive Pen
• USB Cable (for interactive features)
• VGA Cable
• User Manual (this document)
• Quick Start Guide

4. Product Overview

Familiarize yourself with the various parts and components of your Mimio Boxlight P9 WX36N projector.

Figure 4.1: Top View of the Projector. This image shows the top surface of the Mimio Boxlight P9 WX36N projector, highlighting the lens assembly at the front, control panel buttons, and the Boxlight logo. The overall shape is rectangular with rounded edges, and the color is light gray or white.

Figure 4.2: Side View of the Projector. This image displays the Mimio Boxlight P9 WX36N projector from a side angle, revealing the ventilation grilles on the side, the lens, and some input ports. The design emphasizes its compact and portable nature.

4.1 Front Panel

• Projection Lens: Emits the image.
• Focus Ring: Adjusts image sharpness.
• Keystone Correction Lever: Corrects trapezoidal distortion.

4.2 Top Panel

• Control Panel: Buttons for menu navigation, power, source selection.
• Indicator Lights: Power, Lamp, Temperature.

4.3 Rear Panel (Input/Output Ports)

• HDMI Input: For digital video and audio sources.
• VGA Input: For analog video sources (e.g., older computers).
• USB Type-B: For interactive pen functionality.
• Audio In/Out: 3.5mm jacks for audio connection.
• Power Inlet: Connects to the power cord.

5. Setup

5.1 Projector Placement

Position the projector on a stable, flat surface or mount it securely. Ensure the projector is perpendicular to the screen for optimal image geometry. Maintain adequate space around the projector for ventilation.

• For tabletop use, ensure the surface is level.
• Avoid placing the projector in direct sunlight or near heat sources.
• Refer to the projection distance chart (not provided in this manual, typically found in a separate guide) for optimal screen size and distance.

5.2 Connecting to Power

1. Connect the power cord to the projector's power inlet.
2. Plug the other end of the power cord into a grounded electrical outlet.
3. The power indicator light on the projector should illuminate.

5.3 Connecting Source Devices

The P9 WX36N supports various input sources. Choose the appropriate cable for your device.

• HDMI: Connect an HDMI cable from your computer, Blu-ray player, or other HDMI-enabled device to the projector's HDMI input port.
• VGA: Connect a VGA cable from your computer to the projector's VGA input port. If connecting a computer, you may also need to connect an audio cable from your computer's audio output to the projector's Audio In port.
• USB (for Interactive Pen): Connect a USB Type-B cable from your computer to the projector's USB Type-B port to enable interactive pen functionality.

5.4 Initial Power-On and Adjustment

1. Press the Power button on the projector's control panel or remote control to turn on the projector.
2. Adjust the Focus Ring around the lens until the image is sharp and clear.
3. If the image appears trapezoidal, use the Keystone Correction Lever or digital keystone correction in the menu to square the image.
4. Select the correct input source using the Source button on the projector or remote.

6. Operating Instructions

6.1 Basic Operation

• Power On/Off: Press the Power button once to turn on. Press twice to turn off (confirming shutdown).
• Source Selection: Press the "Source" button to cycle through available input sources (HDMI, VGA, etc.).

6.2 Menu Navigation

Use the control panel buttons or the remote control to navigate the on-screen display (OSD) menu.

• Press the Menu button to open the OSD menu.
• Use the Arrow buttons to navigate through menu options.
• Press OK/Enter to select an option or confirm a setting.
• Press Menu or Exit again to close the OSD menu.

6.3 Picture Settings

Adjust image quality settings from the OSD menu.

• Brightness: Adjusts the overall luminance of the image.
• Contrast: Controls the difference between light and dark areas.
• Color Temperature: Changes the warmth or coolness of the colors.
• Aspect Ratio: Selects the display ratio (e.g., 16:9, 4:3).
• Projection Mode: Adjusts for front, rear, ceiling front, or ceiling rear projection.

6.4 Audio Settings

Control the projector's internal speaker volume or audio output.

• Volume: Adjusts the sound level.
• Mute: Silences the audio output.

6.5 Interactive Pen Usage

To use the interactive features, ensure the USB Type-B cable is connected between the projector and your computer, and the necessary drivers (if any) are installed on your computer.

• Calibration: Follow the on-screen instructions to calibrate the interactive pen for accurate tracking. This usually involves touching specific points on the projected image with the pen.
• Writing/Drawing: Use the interactive pen as a mouse or writing tool directly on the projected surface.
• Software: Utilize compatible interactive software (e.g., MimioStudio) on your computer for advanced features.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your projector.

7.1 Cleaning the Projector

• Casing: Wipe the projector casing with a soft, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Do not use abrasive cleaners or solvents.
• Lens: Gently clean the lens with a lens cleaning cloth or lens paper. Do not use liquid cleaners directly on the lens.
• Ventilation Openings: Use a soft brush or a vacuum cleaner with a brush attachment to remove dust from the ventilation openings.

7.2 Lamp Replacement

The projector lamp has a finite lifespan. When the lamp indicator light illuminates or the image becomes dim, it's time to replace the lamp. The P9 has a 2000-hour lamp life. Always use an official Boxlight replacement lamp.

1. Turn off the projector and unplug the power cord. Allow the projector to cool down for at least 30 minutes.
2. Locate the lamp cover (refer to the projector diagram for exact location).
3. Unscrew the lamp cover and carefully remove it.
4. Unscrew the screws securing the lamp module.
5. Carefully pull out the old lamp module.
6. Insert the new lamp module, ensuring it is seated correctly.
7. Secure the new lamp module with screws and replace the lamp cover.
8. Plug in the power cord and turn on the projector. Reset the lamp timer in the OSD menu.

7.3 Air Filter Cleaning/Replacement

The air filter prevents dust from entering the projector and affecting performance. Clean the filter regularly.

1. Turn off the projector and unplug the power cord.
2. Locate the air filter cover.
3. Remove the cover and gently pull out the air filter.
4. Clean the filter using a soft brush or a vacuum cleaner. If heavily soiled or damaged, replace it with a new one.
5. Reinsert the clean filter and replace the cover.

8. Troubleshooting

This section addresses common issues you might encounter with your projector. If the problem persists, contact customer support.

9. Specifications

Detailed technical specifications for the Mimio Boxlight P9 WX36N Projector.

10. Warranty and Support

Boxlight provides a limited warranty for its products. Please refer to the warranty card included with your purchase or visit the official Boxlight website for detailed warranty terms and conditions.

For technical support, service, or inquiries about replacement parts, please contact Boxlight customer service. Have your product model number (P9 WX36N) and serial number ready when contacting support.

Online Support: www.boxlight.com/support

Phone Support: Refer to your regional Boxlight contact information.