Introduction
Thank you for choosing the Teamson Home Outdoor Cascade Garden Fountain. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new water feature. Please read these instructions carefully before assembly and use, and retain them for future reference.
This sculptural fountain is designed to create a soothing and relaxing environment in your garden or outdoor space. It features integrated LED lights for enhanced ambiance during the evening hours. The electrically powered pump ensures continuous water circulation, producing a calming sound of flowing water.
Image: The Teamson Home Curved Cascade Garden Fountain, showcasing its design and LED lighting in an outdoor setting.
Safety Information
- Always disconnect the power supply before performing any maintenance or cleaning.
- Ensure the fountain is placed on a stable, level surface to prevent tipping.
- Do not operate the pump without water. This can cause damage to the pump.
- Keep children and pets away from the fountain during operation.
- Use only the provided power adapter and components.
- Protect electrical connections from water and moisture.
- Do not attempt to modify or repair the fountain or its components. Contact qualified personnel for service.
Package Contents
Please check that all components are present and undamaged before assembly:
- Fountain unit (polyresin structure)
- Integrated water pump (Model YH-LV110T)
- Power adapter/transformer
- LED lights (integrated)
- Decorative pebbles
- Instruction manual
Setup Instructions
Assembly is quick and typically takes less than 10 minutes.
- Unpack: Carefully remove all components from the packaging.
- Placement: Choose a stable, level location for your fountain. Ensure it is near a suitable electrical outlet that is protected from weather elements if used outdoors.
- Connect Pump: Locate the integrated water pump inside the fountain basin. Connect the water tube from the fountain to the pump's outlet. Ensure a secure fit.
- Fill with Water: Fill the fountain basin with clean water. The water level should be sufficient to completely submerge the pump, but not so high that it overflows when the pump is running. The water capacity is approximately 9 liters.
- Add Pebbles: Distribute the provided decorative pebbles into the basin as desired.
- Connect Power: Plug the pump's power cable into the transformer, then plug the transformer into a suitable electrical outlet.
- Start Operation: The pump will begin circulating water, and the LED lights will illuminate. It may take a few moments for the water to flow smoothly as the pump primes.
Image: Dimensions of the fountain: 34 cm (13.39") L x 22 cm (8.66") W x 98 cm (38.58") H.
Operating Instructions
Once set up, operating your fountain is straightforward:
- Power On/Off: The fountain operates when plugged into an electrical outlet. To turn it off, simply unplug the power adapter.
- Water Level: Regularly check the water level in the basin. Due to evaporation, especially in warm or windy conditions, water will need to be replenished periodically. Ensure the pump remains fully submerged.
- LED Lights: The integrated LED lights will automatically turn on when the fountain is powered, providing illumination for evening enjoyment.
Image: The fountain positioned on a grassy area, demonstrating its versatility in garden placement.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your fountain:
- Water Changes: Change the water every few weeks to prevent algae buildup and keep the water clean.
- Cleaning the Fountain: Periodically clean the fountain's surface with a soft cloth and mild soap. Avoid abrasive cleaners that could damage the polyresin finish.
- Pump Cleaning: Disconnect power. Remove the pump from the basin. Disassemble the pump cover and impeller to clean any debris, mineral deposits, or algae. Rinse thoroughly and reassemble.
- Winterization: In freezing temperatures, drain all water from the fountain and pump. Store the fountain indoors or cover it to protect it from frost damage. The polyresin structure is treated against UV and climatic conditions, including frost, but proper winterization is recommended for extreme cold.
Image: A detailed view of the water cascading over the textured slate-effect surface.
Image: The fountain's base, showing the decorative pebbles and the warm glow of the LED lights.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not running / No water flow |
|
|
| Water flow is weak |
|
|
| Excessive splashing |
|
|
| LED lights not working |
|
|
Specifications
- Model Number: RJ-19048-EU
- Brand: Teamson Home
- Color: Grey
- Material: Polyresin
- Product Dimensions: 34 cm (L) x 22 cm (W) x 98 cm (H)
- Item Weight: 5.5 kg (approx. 12.1 lbs)
- Power Source: Plug In
- Pump Model: YH-LV110T
- Pump Flow Rate: 450 L/H
- Pump Power: 7W
- Cable Length: 200 cm
- Water Capacity: 9 Liters
- Special Features: Durability, Integrated LED Lights, Water Pump
- UPC: 810014812199
- Country of Origin: China
Warranty and Support
For warranty information, product support, or to order replacement parts, please refer to the contact details provided with your purchase documentation or visit the official Teamson Home website. Please have your model number (RJ-19048-EU) and purchase date ready when contacting support.
