Zippo Rechargeable Candle Lighter (Gray) - Instruction Manual

Product Overview

The Zippo Rechargeable Candle Lighter provides a flameless, electric arc for lighting candles and other items. Its durable metal construction and flexible neck offer convenience and safety for various uses.

Image: Zippo Rechargeable Candle Lighter in Gray with flexible neck extended.

Key Features:

• Rugged, durable metal construction for longevity.
• Reusable design eliminates the need for disposable lighters.
• Long-lasting battery life between charges.
• Includes a charging cable for convenient recharging.
• Flexible neck allows easy access to tight spaces.

Setup

Charging the Lighter:

1. Locate the USB charging port at the base of the lighter.
2. Connect the provided USB charging cable to the lighter's port.
3. Plug the other end of the USB cable into a compatible USB power source (e.g., computer, wall adapter).
4. The LED indicator lights on the lighter will illuminate to show the charging progress. Each light typically represents 20% of the battery charge.
5. Once all LED lights are solid, the lighter is fully charged. Disconnect the charging cable.

Image: Close-up view of the USB charging port located at the base of the lighter.

Operating Instructions

Activating the Lighter:

1. Locate the ON/OFF safety switch on the side of the lighter.
2. Slide the switch to the "ON" position. The LED battery indicator lights will illuminate.
3. To activate the electric arc, press and hold the activation button located above the safety switch. A purple electric arc will appear between the two prongs at the tip of the flexible neck.
4. Release the activation button to turn off the arc.
5. For safety, the lighter will automatically switch off after a few seconds of inactivity or if the safety switch is moved to the "OFF" position.

Image: The Zippo lighter with its flexible neck bent, showing the activated electric arc between the prongs.

Lighting a Candle:

1. Ensure the lighter is charged and the safety switch is in the "ON" position.
2. Position the flexible neck so that the candle wick is between the two prongs of the lighter.
3. Press and hold the activation button. The electric arc will ignite the wick.
4. Once the wick is lit, release the activation button and remove the lighter.
5. For deep jars or hard-to-reach wicks, utilize the flexible neck to maneuver the arc precisely.

Maintenance

Cleaning the Arc Prongs:

Over time, soot or wax residue may accumulate on the arc prongs, potentially affecting performance. Regular cleaning is recommended.

1. Ensure the lighter is turned OFF and completely cool before cleaning.
2. Use a cotton swab (Q-tip) dipped in rubbing alcohol to gently clean the area between and around the arc prongs.
3. Vigorously rub the contacts until any visible soot or wax is removed and the metal is clear.
4. Allow the lighter to dry completely before attempting to use it again.

Caution: Always ensure the lighter is off and cool, and keep flammable substances like alcohol away from the arc prongs during cleaning.

Troubleshooting

• Lighter not igniting reliably:

  This is often caused by wax or soot buildup on the arc prongs. Refer to the "Maintenance" section for cleaning instructions.

• Lighter not turning on or charging:

  Ensure the lighter is properly connected to a working USB power source. Check the charging cable for damage. If the battery is completely depleted, it may take a few minutes for the LED indicators to light up.

• Arc is weak or inconsistent:

  The battery may be low. Recharge the lighter fully. Also, ensure the arc prongs are clean as per the "Maintenance" section.

Specifications

Warranty and Support

The Zippo Rechargeable Candle Lighter comes with a 1-year warranty from the manufacturer, Zippo Manufacturing Company.

For warranty claims, technical support, or further inquiries, please contact Zippo customer service directly or visit their official website.

For additional product information, you may visit the Zippo Store on Amazon.