1. Introduction
Thank you for choosing the Speed-Link Drift O.Z. Racing Wheel. This gaming racing wheel is designed for PC, offering precise steering and powerful force-feedback effects for a highly realistic gaming experience. This manual provides essential information for setting up, operating, and maintaining your racing wheel to ensure optimal performance and longevity.
2. Safety Information
- Read all instructions carefully before using the product.
- Keep the device away from water, moisture, and extreme temperatures.
- Do not attempt to disassemble or modify the device. This will void the warranty.
- Use only the provided cables and accessories.
- Ensure the device is placed on a stable surface to prevent accidental falls.
- Disconnect the USB cable from your PC when not in use for extended periods.
3. Package Contents
Please check the package contents to ensure all items are present:
- Speed-Link Drift O.Z. Racing Wheel
- Pedal Unit (Gas and Brake)
- User Manual (this document)
4. Setup
Follow these steps to set up your racing wheel:
- Placement: Place the racing wheel on a stable, flat surface, such as a desk or gaming cockpit. The integrated suction cups on the base of the racing wheel provide ultimate stability. Ensure the surface is clean for optimal suction.
- Connect Pedals: Connect the pedal unit cable (1.6m length) to the designated port on the back of the racing wheel.
- Connect to PC: Plug the USB connector cable (2m length) from the racing wheel into an available USB port on your PC.
- Driver Installation: Your PC should automatically detect and install the necessary drivers. If not, please visit the official Speed-Link website for driver downloads.
- Calibration: Once drivers are installed, you may need to calibrate the racing wheel and pedals through your operating system's game controller settings or within your game's control options.
Image: The Speed-Link Drift O.Z. Racing Wheel, showcasing its black and orange design with the steering wheel and pedal unit. This image illustrates the overall product design and components.
5. Operating the Racing Wheel
The Drift O.Z. Racing Wheel offers a range of features for an immersive gaming experience:
- Steering Precision: Enjoy perfect steering precision with a huge 180-degree steering lock for superior control. The rubberised racing-wheel rim ensures maximum grip.
- Force Feedback: Experience powerful force-feedback effects that deliver a highly realistic gaming experience, simulating road conditions and impacts.
- Pedals: The precise pedal unit includes dedicated pedals for gas and brakes, allowing for nuanced control over acceleration and deceleration.
- Gear Shifting: Achieve fastest gear-shifting times using the professional gear stick and rapid-access shifter paddles located on the wheel.
- Controls: The wheel features a maximum precision digital D-pad and 12 fire buttons for comprehensive control options.
- Customisation: Buttons and pedal configurations are fully customisable to suit your preferences within game settings.
- Mode Switch: An analogue and digital mode switch allows you to select the appropriate input mode for your game.
- Sensitivity & Vibration: Configure sensitivity settings and vibration strength to fine-tune your gaming experience.
6. Maintenance
To ensure the longevity and optimal performance of your racing wheel, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the racing wheel and pedals. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
- Avoid Liquids: Do not spray cleaning liquids directly onto the device.
- Storage: Store the racing wheel in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Care: Avoid sharp bends or kinks in the cables. Do not pull on the cables to disconnect the device.
7. Troubleshooting
If you encounter issues with your Speed-Link Drift O.Z. Racing Wheel, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Racing wheel not detected by PC. |
|
| Force feedback is not working or is weak. |
|
| Pedals are not responding correctly. |
|
| Buttons or D-pad are unresponsive. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | SL-6695-BKOR-01 |
| Compatibility | PC (Windows) |
| Steering Lock | 180 degrees |
| Connectivity | USB |
| USB Cable Length | 2 meters |
| Pedal Cable Length | 1.6 meters |
| Controls | Digital D-pad, 12 fire buttons, professional gear stick, shifter paddles |
| Features | Force feedback, customisable buttons/pedals, analogue/digital mode switch, configurable sensitivity/vibration, suction cups for stability, rubberised rim |
| Product Dimensions | 11.34 x 14.06 x 10.98 inches |
| Item Weight | 10.6 ounces |
9. Warranty and Support
Speed-Link products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Speed-Link website. If you require technical support or have questions not covered in this manual, please contact Speed-Link customer service through their official support channels.
Online Support: www.speedlink.com/en/support
