1. Product Overview
The Greater Goods Digital AccuCheck Bathroom Scale is designed for accurate and consistent body weight measurement. Featuring a sleek, modern design and advanced sensor technology, it provides reliable readings for effective weight management.
Figure 1.1: The Greater Goods Digital AccuCheck Bathroom Scale, shown with the included AAA batteries and a quick start guide.
Key Features:
- AccuCheck System: Patented technology that double-checks weight for enhanced accuracy.
- High Precision Sensors: Equipped with four precision sensors for reliable measurements up to 400 lbs (180 kg).
- Intuitive Operation: Features step-on activation and automatic shut-off for ease of use and battery conservation.
- Clear Display: Large, backlit LCD display ensures readings are easy to see in various lighting conditions.
- Durable Design: Constructed with tempered glass for durability and a modern aesthetic.
2. Initial Setup
2.1. Battery Installation
Your scale requires 3 AAA batteries, which are included. To install or replace batteries:
- Locate the battery compartment on the underside of the scale.
- Open the battery compartment cover.
- Insert the 3 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Figure 2.1: Underside of the scale showing the battery compartment and unit switch.
2.2. Unit Selection (lbs/kg)
The scale can display weight in pounds (lb) or kilograms (kg). To switch between units:
- Turn the scale over to access the underside.
- Locate the unit switch (often a small button or slider) near the battery compartment.
- Toggle the switch to select your preferred unit of measurement (lb or kg).
Once selected, the display will show the chosen unit when the scale is activated.
3. Operating Instructions
3.1. First Use & Calibration
For the most accurate readings, it is recommended to calibrate the scale before its first use or if it has been moved.
- Place the scale on a hard, flat surface. Avoid carpets or uneven flooring.
- Step onto the scale briefly, then step off. The display will show "0.0" or a similar indication, then turn off. This calibrates the scale.
3.2. Taking a Measurement
The AccuCheck scale features "step-on" technology, eliminating the need to tap or wait for zeroing.
- Ensure the scale is on a hard, flat surface.
- Step onto the center of the scale with bare, dry feet. Stand still.
- The display will show your weight. The AccuCheck system will then double-check the reading, indicated by a change in the display (e.g., from orange to green indicator).
- Once the final, verified weight is displayed, you can step off. The reading will remain visible for a few seconds before the scale automatically shuts off.
Figure 3.1: Step-on activation for immediate weight measurement.
Figure 3.2: The AccuCheck system verifies your weight for accuracy.
4. Care and Maintenance
4.1. Cleaning
To keep your scale clean and in good condition:
- Wipe the surface with a soft, damp cloth.
- Do not use abrasive cleaners or immerse the scale in water.
- Avoid harsh chemicals that may damage the finish or electronic components.
4.2. Storage
When not in use, store the scale in a dry place away from extreme temperatures and humidity.
- Store flat to prevent damage to the sensors.
- Avoid placing heavy objects on the scale when stored.
Figure 4.1: Proper storage helps maintain scale integrity.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display / Scale does not turn on. | Batteries are dead or incorrectly installed. | Check battery polarity. Replace batteries if necessary. |
| Inaccurate or inconsistent readings. | Scale is on an uneven surface; not calibrated; or moved after calibration. | Place scale on a hard, flat surface. Perform calibration (step on, then off). Ensure feet are bare and dry. |
| "Lo" or "Err" message on display. | Low battery; overload; or internal error. | Replace batteries ("Lo"). Ensure weight is within 400 lbs capacity ("Err"). If error persists, contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Greater Goods customer support.
6. Product Specifications
- Model Number: 0394
- Capacity: 400 lbs (180 kg)
- Measurement Resolution: 0.1 lb / 0.05 kg
- Product Dimensions: 11.75 x 11.75 x 0.9 inches
- Item Weight: 3.5 Pounds
- Power Source: 3 x AAA Batteries (included)
- Display Type: Backlit LCD, Vanishing Display
- Material: Tempered Glass Platform
- Special Features: Auto Shut Off, Large Display, Portable, AccuCheck Technology
Figure 6.1: Physical dimensions of the scale.
Figure 6.2: Summary of key features and specifications.
7. Warranty and Support
7.1. Warranty Information
The Greater Goods Digital AccuCheck Bathroom Scale comes with a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.
7.2. Customer Support
For any questions, concerns, or technical assistance, please contact the Greater Goods customer support team. Our friendly experts are based in St. Louis, USA, and are ready to assist you.
Website: www.greatergoods.com
Email: support@greatergoods.com
Phone: (Example: 1-800-XXX-XXXX - *Please refer to the official website for the most current contact number.*)
Customer service hours are typically during Central Standard Time business hours. You may also find helpful resources and FAQs on the Greater Goods website.
8. Video Information
No official product videos from the seller were available for embedding in this manual based on the provided data.
