Electrohome Kingston 7-in-1 Vintage Vinyl Record Player Stereo System User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Electrohome Kingston 7-in-1 Vintage Vinyl Record Player Stereo System. This system integrates multiple audio playback options, including a 3-speed turntable, Bluetooth connectivity, AM/FM radio, CD player, auxiliary input, USB playback, and vinyl/CD to MP3 recording capabilities.

Please read this manual thoroughly before using the product to ensure proper operation and to maximize your listening experience.

2. Safety Instructions

• Power Source: Connect the unit only to an AC outlet of the specified voltage.
• Ventilation: Ensure adequate ventilation. Do not block ventilation openings.
• Water and Moisture: Do not expose the unit to rain, moisture, or dripping/splashing liquids.
• Heat: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Cleaning: Unplug the unit from the wall outlet before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
• Overloading: Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

3. Package Contents

Verify that all items listed below are included in your package:

• Electrohome Kingston 7-in-1 Stereo System
• 45 RPM Adapter
• Remote Control (with 2 AAA batteries)
• Power Cord
• User Manual
• Quick Start Guide

4. Product Overview

4.1 Front Panel and Controls

Image: Front view of the Electrohome Kingston 7-in-1 Stereo System, showcasing its walnut finish, front speaker grille, control panel, and turntable lid.

Image: Visual representation of the system's multiple playback options, including Vinyl, Bluetooth, USB, CD, Auxiliary input, and AM/FM radio.

• Power/Volume Knob: Turns the unit on/off and adjusts the master volume.
• Function Button: Selects the audio source (Phono, Bluetooth, CD, USB, AM, FM, AUX).
• Display: Shows current mode, track number, radio frequency, etc.
• Tuning Knob: Adjusts radio frequency in AM/FM mode.
• Playback Controls: Play/Pause, Stop, Skip Forward/Backward for CD/USB modes.
• CD Tray: For inserting audio CDs.
• USB Port: For USB drive playback and MP3 recording.
• EQ Button: Adjusts sound equalization settings.
• Record Button: Initiates MP3 recording from Vinyl or CD.

4.2 Rear Panel Connections

Image: Close-up of the rear panel connections, highlighting the 'AUX IN' 3.5mm jack and 'AUDIO OUT' RCA ports (red and white).

• AUX IN: 3.5mm stereo input for connecting external audio devices.
• RCA AUDIO OUT: Stereo RCA outputs (Left/Right) for connecting to external amplifiers or powered speakers.
• FM Antenna: Connection for the included FM wire antenna.
• AC Power Input: For connecting the power cord.

4.3 Turntable Components

• Platter: The rotating surface where records are placed.
• Spindle: Central pin for records.
• 45 RPM Adapter: Used for playing 7-inch records with a large center hole.
• Tonearm: Holds the stylus and tracks the record grooves.
• Stylus (Needle): The component that reads the record grooves.
• Cue Lever: Raises and lowers the tonearm.
• Speed Selector: Switch for 33, 45, or 78 RPM.
• Auto-Stop Switch: Enables or disables automatic platter stop at the end of a record.

4.4 Remote Control

Image: The remote control for the system, featuring buttons for power, source selection, playback controls, volume adjustment, and EQ settings.

The included remote control allows for convenient operation of various functions from a distance, including power, source selection, volume, playback controls, and EQ settings. Ensure the included AAA batteries are installed correctly.

5. Setup

5.1 Unpacking

Carefully remove the unit from its packaging. Retain the packaging materials for future transport or storage. Remove any protective films or covers from the unit.

5.2 Placement

Place the stereo system on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure there is adequate space around the unit for ventilation.

5.3 Power Connection

Connect the AC power cord to the AC Power Input on the rear of the unit, then plug the other end into a standard wall outlet.

5.4 Antenna Setup

For optimal FM radio reception, connect the included FM wire antenna to the FM Antenna jack on the rear of the unit. Extend the wire fully and position it for the best signal.

6. Operating Instructions

6.1 Power On/Off and Volume

• To turn the unit on or off, rotate the Power/Volume knob clockwise or counter-clockwise until it clicks.
• Adjust the volume by rotating the Power/Volume knob.

6.2 Source Selection

Press the 'Function' button repeatedly on the front panel or the 'Source' button on the remote control to cycle through the available audio sources: Phono (Vinyl), Bluetooth, CD, USB, AM, FM, and AUX.

6.3 Turntable Operation (Phono Mode)

Image: A close-up of the turntable playing a vinyl record, illustrating its compatibility with 7-inch, 10-inch, and 12-inch records.

1. Lift the turntable lid.
2. Place a record on the platter. If playing a 7-inch record with a large center hole, place the 45 RPM adapter on the spindle first.
3. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector switch.
4. Push the Auto-Stop switch to ON if you want the platter to stop automatically at the end of the record.
5. Gently release the tonearm lock.
6. Lift the cue lever to raise the tonearm.
7. Manually position the tonearm over the desired starting groove of the record.
8. Lower the cue lever to gently place the stylus onto the record. Playback will begin.
9. To stop playback, lift the cue lever, return the tonearm to its rest, and engage the tonearm lock.

6.4 Bluetooth Operation

Image: A smartphone showing a music player interface, positioned near the stereo system, indicating active Bluetooth playback.

1. Select 'Bluetooth' mode using the Function button. The display will show 'BT' and flash, indicating it is searching for a device.
2. Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
3. Search for 'Electrohome Kingston' in your device's Bluetooth settings and select it to pair.
4. Once paired, the 'BT' indicator on the system's display will stop flashing.
5. You can now play audio from your device through the stereo system.

6.5 CD Player Operation

1. Select 'CD' mode using the Function button.
2. Press the 'Open/Close' button to open the CD tray.
3. Place an audio CD onto the tray with the label side facing up.
4. Press the 'Open/Close' button again to close the tray. The system will read the CD.
5. Use the Play/Pause, Stop, and Skip buttons to control playback.

6.6 AM/FM Radio Operation

1. Select 'AM' or 'FM' mode using the Function button.
2. Rotate the Tuning knob to manually tune to your desired radio station.
3. For automatic scanning, press and hold the Skip Forward/Backward buttons.

6.7 Auxiliary Input Operation (AUX Mode)

1. Connect an external audio device (e.g., smartphone, MP3 player) to the 'AUX IN' jack on the rear panel using a 3.5mm audio cable (not included).
2. Select 'AUX' mode using the Function button.
3. Play audio from your connected device. The system will output the sound.

6.8 USB Playback Operation

1. Insert a USB flash drive containing MP3 audio files into the USB port on the front panel.
2. Select 'USB' mode using the Function button. The system will automatically begin playing MP3 files from the USB drive.
3. Use the Play/Pause, Stop, and Skip buttons to control playback.

6.9 Vinyl/CD to MP3 Recording

Image: A USB flash drive plugged into the front USB port of the system, with the display showing 'PHONO', indicating readiness for vinyl-to-MP3 recording.

1. Insert a USB flash drive into the USB port. Ensure it has sufficient free space.
2. Select either 'Phono' or 'CD' mode, depending on the source you wish to record.
3. Start playback of the vinyl record or CD.
4. Press the 'Record' button on the front panel. The recording indicator will illuminate, and the system will begin recording the audio to the USB drive as MP3 files.
5. To stop recording, press the 'Record' button again or the 'Stop' button.
6. Recorded files will be saved in a dedicated folder on the USB drive.

7. Maintenance

7.1 Cleaning the Unit

Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure the unit is unplugged before cleaning.

7.2 Stylus Care

The stylus is a delicate component. Avoid touching it with your fingers. Clean the stylus periodically using a soft brush designed for stylus cleaning, brushing gently from back to front. A worn or damaged stylus can harm your records and degrade sound quality. Replace the stylus if you notice a decrease in sound quality or visible damage.

8. Troubleshooting

• No Power: Ensure the power cord is securely plugged into both the unit and a working wall outlet. Check if the Power/Volume knob is turned on.
• No Sound: Check the volume level. Ensure the correct audio source is selected. If using external speakers via RCA Out, ensure they are powered on and connected correctly.
• Turntable Not Spinning: Ensure the unit is in Phono mode. Check if the tonearm is lifted from its rest.
• Skipping Records: Ensure the record is clean and free of dust. Check if the unit is on a stable, level surface. The stylus may be dirty or worn and require cleaning or replacement.
• Bluetooth Pairing Issues: Ensure the unit is in Bluetooth mode and flashing 'BT'. Make sure your device's Bluetooth is enabled and within range. Try unpairing and re-pairing the device.
• Poor Radio Reception: Adjust the position of the FM wire antenna. For AM, try rotating the unit for better reception.
• USB Recording Not Working: Ensure the USB drive is formatted correctly (FAT32) and has sufficient free space. Ensure the source (Vinyl or CD) is playing when the record button is pressed.

9. Specifications

• Model Number: RR75Q2
• Product Dimensions: 13.5 x 17.3 x 12.25 inches
• Item Weight: 23.8 pounds
• Power Source: Corded Electric
• Motor Type: DC Motor
• Turntable Speeds: 33 1/3, 45, 78 RPM
• Compatible Devices: Headphone, Smartphone, Speaker, Tablet
• Material: Engineered Wood
• Batteries (Remote): 2 AAA batteries (included)

10. Warranty and Support

The Electrohome Kingston 7-in-1 Vintage Vinyl Record Player Stereo System comes with a 1-Year Manufacturer's Warranty. Electrohome also provides Lifetime Customer Support for this product.

For technical assistance, warranty claims, or further information, please visit the official Electrohome website or contact their customer support directly.

You can find more information and support resources by visiting the Electrohome Store on Amazon.