BUNN 54000.0100 ITCB-DV HV PE Infusion Series High Volume Tea/Coffee Brewer User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BUNN 54000.0100 ITCB-DV HV PE Infusion Series High Volume Tea/Coffee Brewer. Please read this manual thoroughly before operating the equipment to ensure safe and efficient use. This high-volume brewer is designed for commercial environments, featuring advanced brewing technologies for both coffee and tea.

Important Note: Servers and dispensers are sold separately and are not included with this brewer.

Image: The BUNN 54000.0100 ITCB-DV HV PE Infusion Series High Volume Tea/Coffee Brewer, featuring a stainless steel exterior, a digital touchscreen display at the top, and a large stainless steel thermal server with a dispenser tap at the bottom. The coffee/tea funnel is visible above the server.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons. This appliance is intended for commercial use only.

• Read all instructions before using the appliance.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock, and injury, do not immerse cord, plugs, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Ensure proper grounding for electrical connections.

Setup Instructions

1. Unpacking

• Carefully remove the brewer from its packaging.
• Inspect the unit for any shipping damage. Report any damage immediately to your supplier.
• Remove all packing materials, including any protective films or ties.

2. Placement

• Place the brewer on a stable, level, and sturdy surface capable of supporting its weight when full.
• Ensure adequate clearance around the unit for ventilation and access for maintenance.
• Locate the brewer near a suitable water supply and electrical outlet.

3. Initial Cleaning

• Before first use, wipe down the exterior of the brewer with a damp cloth.
• Wash the included coffee funnel, tea funnel, and milk frother with warm, soapy water, then rinse thoroughly.
• Run several cycles of plain water through the brewer to flush the internal components.

4. Water Connection

• This brewer requires a plumbed-in water connection. Professional installation by a qualified plumber is highly recommended to ensure proper connection and prevent leaks.
• Connect the brewer to a cold water supply line with appropriate pressure and flow rate as specified in the technical data.
• Install a water filter system if local water quality requires it to prevent scale buildup and ensure optimal beverage taste.

5. Electrical Connection

• Ensure the electrical supply matches the brewer's requirements. The unit is factory-configured for 120V/60/1-ph, 1700 watts, 14 amps, with a NEMA 5-15P plug.
• The unit is field convertible to 120/208V/60/1-ph, 2900 watts, 14 amps (direct wired) or 120/240V/60/1-ph, 4050 watts, 17 amps (direct wired). Conversion should only be performed by a qualified electrician.
• Plug the brewer into a dedicated, grounded electrical outlet. Avoid using extension cords.

Operating Your Brewer

1. Control Panel Overview

The brewer features a 4-3/10" color touchscreen display for intuitive control. This interface allows you to select brew recipes, adjust settings, and monitor brewing status.

• Digital Temperature Control: Use the touchscreen to precisely set and monitor the brewing water temperature for optimal extraction.
• Wireless Interface: The integrated wireless interface allows for remote management and recipe updates (consult BUNN documentation for specific connectivity features).

2. Brewing Coffee

1. Ensure the coffee funnel is clean and properly seated in the brew head.
2. Add the desired amount of ground coffee to the coffee funnel.
3. Place an empty coffee server (not included) beneath the funnel.
4. Select the desired coffee recipe or brew size on the touchscreen. The brewer utilizes a SmartWAVE sprayhead, pre-infusion, and pulse brew technology for consistent extraction.
5. Initiate the brew cycle. The display will show the brewing progress.
6. Once brewing is complete, carefully remove the server.

3. Brewing Tea

1. Ensure the plastic tea funnel is clean and properly seated in the brew head.
2. Add the desired amount of loose leaf tea or tea bags to the tea funnel.
3. Place an empty tea dispenser (not included) beneath the funnel.
4. Select the desired tea recipe or brew size on the touchscreen. The brewer includes a dilution feature with an integrated dilution nozzle for precise tea concentration.
5. Initiate the brew cycle.
6. Once brewing is complete, carefully remove the dispenser.

Maintenance and Care

Regular cleaning and maintenance will ensure the longevity and optimal performance of your BUNN brewer.

1. Daily Cleaning

• Exterior: Wipe down the stainless steel exterior with a damp cloth and mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads.
• Funnels: Remove and thoroughly wash the coffee and tea funnels after each use with warm, soapy water. Rinse completely and allow to air dry.
• Drip Tray: Empty and clean the drip tray regularly to prevent overflow and maintain hygiene.

2. Periodic Descaling

• Depending on water hardness, mineral deposits (scale) can build up inside the brewer. This can affect performance and taste.
• Descaling should be performed periodically using a commercial descaling solution designed for coffee/tea brewers. Follow the descaling product's instructions carefully.
• It is recommended to consult the full BUNN service manual or a qualified technician for detailed descaling procedures.

Troubleshooting Guide

This section addresses common issues you might encounter with your brewer. For problems not listed here, please contact customer support.

Product Specifications

Warranty Information

BUNN products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with the product documentation or can be found on the official BUNN website. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, parts, or service inquiries regarding your BUNN 54000.0100 ITCB-DV HV PE Infusion Series High Volume Tea/Coffee Brewer, please contact BUNN customer support directly or visit their official website.

You can find more information and contact details by visiting the BUNN Store on Amazon.