1. Introduction
The Grandstream GWN7630LR is a high-performance outdoor 802.11ac Wave-2 Wi-Fi access point designed for businesses requiring long-range coverage. It features advanced MU-MIMO technology and a robust antenna design, supporting a large number of concurrent clients and extended coverage areas. Its weatherproof casing and heat-resistant technology make it suitable for various outdoor and challenging indoor environments.
This image displays the Grandstream GWN7630LR outdoor Wi-Fi access point. The device is white, rectangular, and features four external antennas, two extending from the top and two from the bottom. A prominent blue LED indicator is visible on the front panel, above the 'GRANDSTREAM' logo.
2. Package Contents
Verify that your package contains all the items listed below:
- GWN7630LR Outdoor Wi-Fi Access Point
- Mounting Kit (brackets, screws, anchors)
- Quick Installation Guide
3. Physical Overview
The GWN7630LR features several ports and indicators for easy setup and monitoring.
LED Indicators
| LED | Status | Description |
|---|---|---|
| System LED (Blue) | Solid Blue | Device is powered on and operating normally. |
| System LED (Blue) | Flashing Blue | Device is booting up or firmware is being upgraded. |
| System LED (Blue) | Off | Device is powered off or not receiving power. |
4. Setup
4.1 Mounting the Device
The GWN7630LR is designed for outdoor installation. Choose a suitable location that provides optimal Wi-Fi coverage and is protected from direct impact. Use the provided mounting kit to securely attach the access point to a pole or wall. Ensure the device is mounted vertically with antennas pointing upwards for best performance.
4.2 Powering the Device
The GWN7630LR supports Power over Ethernet (PoE/PoE+). Connect an Ethernet cable from a PoE/PoE+ enabled switch or a PoE injector (30W recommended) to the LAN port on the GWN7630LR. The device will power on automatically.
4.3 Network Connection
Connect the Ethernet cable from your network infrastructure (router or switch) to the LAN port of the GWN7630LR. This connection provides both power and data connectivity to the access point.
5. Configuration and Operating
5.1 Accessing the Web User Interface (UI)
- Ensure your computer is connected to the same network as the GWN7630LR.
- Open a web browser and enter the default IP address of the GWN7630LR (usually found in the Quick Installation Guide or discovered via Grandstream's GWN Discovery Tool). If DHCP is enabled on your network, the AP will obtain an IP address automatically.
- Log in using the default administrator credentials. It is highly recommended to change the default password immediately after the first login.
5.2 Basic Wi-Fi Configuration
Once logged into the Web UI, navigate to the Wi-Fi settings to configure your wireless networks (SSIDs). You can set up multiple SSIDs, choose security protocols (WPA2/WPA3 recommended), and define bandwidth limits.
5.3 Advanced Features
The GWN7630LR supports advanced features such as MU-MIMO for efficient multi-device communication, beamforming for improved signal strength, and seamless roaming. It can be managed as a standalone unit, via its embedded controller (managing up to 50 local GWN series APs), or through Grandstream's cloud-based GWN.Cloud platform for unlimited AP management.
6. Maintenance
- Firmware Updates: Regularly check for and install the latest firmware updates from the Grandstream website to ensure optimal performance, security, and access to new features.
- Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.
- Environmental Considerations: While designed for outdoor use, avoid exposing the device to extreme temperatures outside its operating range or direct, prolonged exposure to harsh elements if possible.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Incorrect PoE injector or cable; no power from PoE source. | Ensure a 30W PoE injector or PoE+ switch is used. Check Ethernet cable connection. |
| Cannot access Web UI | Incorrect IP address; network connectivity issue; firewall. | Verify device IP address. Check network cable. Temporarily disable firewall. |
| Poor Wi-Fi signal or speed | Interference; improper placement; outdated firmware. | Relocate AP to reduce interference. Update firmware. Adjust channel settings. |
| Clients cannot connect to Wi-Fi | Incorrect Wi-Fi password; SSID hidden; security settings mismatch. | Verify password. Ensure SSID is broadcast or manually add. Check security protocols. |
8. Specifications
Key technical specifications for the Grandstream GWN7630LR:
| Feature | Detail |
|---|---|
| Wireless Type | 802.11ac Wave-2 |
| Wireless Throughput | 2.33Gbps |
| Frequency Band Class | Dual-Band (2.4GHz & 5GHz) |
| MIMO Technology | 4x4:4 MU-MIMO |
| Concurrent Clients | 200+ |
| Coverage Range | Up to 300 meters |
| Wireline Ports | 2x Gigabit Ethernet |
| Power Input | 48 Volts (DC) / PoE/PoE+ |
| Dimensions (LxWxH) | 19.69 x 19.69 x 11.02 inches |
| Item Weight | 1.76 pounds |
| Operating System | Grandstream OS |
9. Warranty and Support
Grandstream products are covered by a limited warranty. For detailed warranty information, technical support, and additional resources, please visit the official Grandstream website or contact their customer support. Keep your purchase receipt for warranty claims.
Online Resources: www.grandstream.com
