SKIL SC5364-00 PWRJump PWRCore 40V Battery Charger

1. Introduction

This manual provides essential information for the safe and efficient operation of your SKIL SC5364-00 PWRJump PWRCore 40V Battery Charger. Please read these instructions thoroughly before use and retain them for future reference. This charger is designed to quickly and efficiently charge SKIL PWRCore 40 lithium-ion batteries.

2. Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before using the charger.
• Do not charge batteries in damp or wet locations.
• Use only SKIL PWRCore 40 lithium-ion batteries with this charger.
• Do not expose the charger to rain or snow.
• Unplug the charger from the outlet when not in use.
• Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Product Features

• Auto PWRJump Technology: Charges a 2.5Ah battery from 0% to 30% in approximately 15 minutes, and fully charges within 60 minutes.
• LED Status Lights: Clearly indicate the battery's charge status, including jumping, 30% charged, charging, and fully charged.
• PWRCore 40 System Compatibility: Designed to charge all SKIL 40V lithium-ion batteries.
• Temperature Management: The charger actively manages each cell in the battery to control temperature and maximize battery life.

4. Setup

Before first use, ensure the charger is placed on a stable, flat surface in a well-ventilated area.

4.1 Connecting the Charger

1. Plug the charger's power cord into a standard 120V AC electrical outlet.
2. The charger's LED indicators will briefly illuminate to confirm power.

Image 1: The SKIL PWRJump PWRCore 40V Charger, ready for use after being plugged into a power source.

4.2 Inserting the Battery

1. Align the battery with the charging port on the charger.
2. Slide the battery firmly into the charger until it clicks into place. Ensure a secure connection.

Image 2: A user inserting a SKIL PWRCore 40V battery into the charger, demonstrating the correct alignment and connection.

5. Operation

Once the battery is correctly inserted, the charger will automatically begin the charging process.

5.1 Understanding LED Indicators

The charger features LED lights that provide real-time status updates on the battery's charge level and condition:

• Jumping (Flashing Green): Indicates the initial rapid charging phase, bringing the battery to 30% capacity quickly.
• 30% (Solid Green): The battery has reached 30% charge.
• Charging (Solid Green, progressing): The battery is actively charging beyond 30%.
• Charged (Solid Green): The battery is fully charged and ready for use.
• Hi/Lo Temp (Flashing Red): Indicates the battery temperature is too high or too low for safe charging. The charger will pause charging until the temperature normalizes.
• Defective (Solid Red): Indicates a problem with the battery. The battery may be damaged or at the end of its life.

Image 3: The SKIL PWRJump charger with a PWRCore 40V battery, highlighting the LED indicators for charge status.

5.2 Product Overview Video

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your charger.

• Keep the charger clean and free from dust and debris. Use a dry cloth to wipe surfaces.
• Do not immerse the charger in water or any other liquid.
• Store the charger in a dry, indoor location away from direct sunlight and extreme temperatures.
• Regularly inspect the power cord for any signs of damage. If damaged, have it replaced by a qualified service technician.

7. Troubleshooting

If you encounter issues with your charger, refer to the following common solutions:

• Charger not powering on: Ensure the power cord is securely plugged into both the charger and a working electrical outlet. Test the outlet with another device.
• Battery not charging (Hi/Lo Temp indicator flashing): The battery may be too hot or too cold. Move the battery and charger to a room temperature environment (between 40°F and 105°F / 4°C and 40°C) and allow it to acclimate before attempting to charge again.
• Battery not charging (Defective indicator solid): The battery may be damaged or at the end of its service life. Try charging a different SKIL PWRCore 40 battery to determine if the issue is with the battery or the charger. If other batteries charge normally, the original battery may need replacement.
• Slow charging: Ensure the charger is connected to a stable power source. Charging times can vary based on battery capacity and ambient temperature.

8. Specifications

Image 4: Visual representation of the charger's dimensions for reference.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your original product purchase or visit the official SKIL website. Keep your purchase receipt as proof of purchase for warranty claims.