DEXIN Tiles and Surface Cleaner Instruction Manual

Product Overview

The DEXIN Tiles and Surface Cleaner is an effective cleaning material and solvent designed to remove stubborn residues such as cement, gypsum, rust, and general dirt. It is suitable for use on a variety of surfaces including tiles, ceramics, concrete, stone, iron, and steel.

Image 1: Front view of the DEXIN Tiles and Surface Cleaner bottle.

Important Information & Precautions

Before using DEXIN, please read and understand the following important information to ensure safe and effective application:

• Trial Test: Always perform a trial test on a small, inconspicuous area before applying DEXIN to the entire surface.
• Marble Surfaces: DEXIN is NOT to be used on marble surfaces.
• Iron Surfaces: After cleaning iron surfaces, it is essential to rinse the iron thoroughly and apply a spray of oil to protect against rust.
• Sensitive Materials: Keep DEXIN away from trees, plants, and chrome-plated surfaces.
• Warranty: The manufacturer holds no responsibility or warranty for any leakage or damage after the customer receives the product.

Main Uses

DEXIN is formulated for effective removal of various contaminants from a wide range of surfaces:

• Removes cement, gypsum, rust, and dirt from floors, roofing, pools, bathrooms, kitchens, fountains, and other similar installations.
• Can be used for final cleaning of floors intended for painting or covering with waterproof coatings.
• Effectively cleans cement, concrete, rust, and dirt from concrete mixers and other cement mortar carrying equipment.
• The high-quality DEXIN formula is generally safe for most painted surfaces. Dirt, rust, cement, and gypsum can be removed from painted surfaces, provided the paint base is strong and stable.

How to Use

Follow these steps for optimal cleaning results:

1. Prepare Surface: Apply water to the surface that needs cleaning.
2. Prepare Solution: In a plastic bucket, mix DEXIN with clean water. The ratio depends on the severity of the cement and dirt:
   • For light dirt: 1 part DEXIN to 5 or 6 parts water.
   • For moderate dirt: 1 part DEXIN to 3 or 4 parts water.
   • For heavy dirt: 1 part DEXIN to 1 or 2 parts water.
3. Application: Apply the prepared solution using a medium-hard brush. For best results, apply the solution a few times.
4. Rinse: After cleaning, thoroughly wash the surface with clean water.

Image 2: Product label showing English instructions for use and safety information.

Safety Information

As with most cleaning materials, DEXIN may cause irritation. It is crucial to take the following safety measures:

• Always wear rubber gloves during handling and application.
• Ensure proper ventilation in the work area when using DEXIN.
• Keep out of the reach of children.

Storage

Store DEXIN in a cool, dry place, away from direct sunlight and frost. When stored properly, the product has a shelf life of three years.

Product Specifications

Warranty and Support

Please note that the manufacturer does not provide a direct warranty or take responsibility for the product once it has been received by the customer, including any issues related to leakage or damage. For any inquiries or support, please contact your point of purchase or the distributor.

Manufacturer/Distributor Information:

• Company: MARVEL INTERNATIONAL WILL
• Email: info@marvelinternational.co.uk
• Website: www.marvelinternational.com
• Sales Mobile: +973 36170000
• Mobile: +973 3623 9696
• Tel: +973 7735 9696
• Fax: +973 7736 9696
• Made In: Bahrain